'Official HOUSTON thread'
04-16-2013, 08:53 AM
^yours are a little to phat.
try to get them closest to stock rolling diameter.
try to get them closest to stock rolling diameter.
04-16-2013, 09:27 AM
http://www.1010tires.com/Tools/Tire-...0R17/245-40R17
I went by this after I had discuess it with a memeber on here (cant remember his name atm). seem to have a very good knowledgeable and valid points on how he expalin things.
This is also the type of data the MKIV uses for tire size utility
I went by this after I had discuess it with a memeber on here (cant remember his name atm). seem to have a very good knowledgeable and valid points on how he expalin things.
This is also the type of data the MKIV uses for tire size utility
Last edited by EvilVirus; 04-16-2013 at 09:39 AM.
04-16-2013, 09:34 AM
you chose the 245/45?
they look super phat!
just how i like my gals
they look super phat!
just how i like my gals
The following users liked this post:
justnspace (04-16-2013)
04-16-2013, 09:40 AM
I stand corrected. they are the right size.
04-16-2013, 10:59 AM
My cheap ass didn't want to pay for the expensive air fare on memorial day weekend.
Maybe sometime in the summer.
My round trip flight to NY was 211.
I wasn't about to pay close to a grand for only 2 days
Maybe sometime in the summer.
My round trip flight to NY was 211.
I wasn't about to pay close to a grand for only 2 days
The following users liked this post:
EvilVirus (04-16-2013)
04-16-2013, 12:37 PM
Instructor
The following 2 users liked this post by EvilVirus:
Bada$$VTEC (04-16-2013),
TLDude876 (04-16-2013)
04-16-2013, 05:44 PM
http://www.1010tires.com/Tools/Tire-...0R17/245-40R17
I went by this after I had discuess it with a memeber on here (cant remember his name atm). seem to have a very good knowledgeable and valid points on how he expalin things.
This is also the type of data the MKIV uses for tire size utility
I went by this after I had discuess it with a memeber on here (cant remember his name atm). seem to have a very good knowledgeable and valid points on how he expalin things.
This is also the type of data the MKIV uses for tire size utility
http://www.1010tires.com/Tools/Tire-...0R18/275-35R18
Why not get coils? You said youre doing over fenders
springs + over fenders/flares = FAIL
04-16-2013, 07:44 PM
Immature
Car
Enthusiasts
Racer
04-16-2013, 09:23 PM
Cruisin'
1.5" drop; max stiff damper setting - all around.
had to raise it up half an inch because it was making noises and for some reason my jpipe doesnt sit flush with the rest of the bottom, it hangs a bit lower. maybe the front end collision caused it to bend? idk lol but im happy with this set up. i aint bout dat low life lmao now time to save up for wheels
also i might do my brakes this sunday if it doesnt rain. stuff is supposed to be coming in on thurs/fri. gonna pick up some bottles of brake fluid tomorrow when i go to the dealership to get my tire all fixed up, caught a damn nail
employee discount ftw
had to raise it up half an inch because it was making noises and for some reason my jpipe doesnt sit flush with the rest of the bottom, it hangs a bit lower. maybe the front end collision caused it to bend? idk lol but im happy with this set up. i aint bout dat low life lmao now time to save up for wheels
also i might do my brakes this sunday if it doesnt rain. stuff is supposed to be coming in on thurs/fri. gonna pick up some bottles of brake fluid tomorrow when i go to the dealership to get my tire all fixed up, caught a damn nail
employee discount ftw
04-16-2013, 10:26 PM
New Member
Originally Posted by Bada$$VTEC
Quote:
Originally Posted by EvilVirus
http://www.1010tires.com/Tools/Tire-...0R17/245-40R17
I went by this after I had discuess it with a memeber on here (cant remember his name atm). seem to have a very good knowledgeable and valid points on how he expalin things.
This is also the type of data the MKIV uses for tire size utility
Thats it,im going 275/35
http://www.1010tires.com/Tools/Tire-...0R18/275-35R18
Quote:
Originally Posted by slicksTSX
anyone have drop springs for sale for an 06 tsx? Figured I'd ask before I buy em online.
Posted from Acurazine.com App for Android
I dont think any of us did springs,so its gonna be hard finding one local.
Why not get coils? You said youre doing over fenders
springs + over fenders/flares = FAIL
Originally Posted by EvilVirus
http://www.1010tires.com/Tools/Tire-...0R17/245-40R17
I went by this after I had discuess it with a memeber on here (cant remember his name atm). seem to have a very good knowledgeable and valid points on how he expalin things.
This is also the type of data the MKIV uses for tire size utility
Thats it,im going 275/35
http://www.1010tires.com/Tools/Tire-...0R18/275-35R18
Quote:
Originally Posted by slicksTSX
anyone have drop springs for sale for an 06 tsx? Figured I'd ask before I buy em online.
Posted from Acurazine.com App for Android
I dont think any of us did springs,so its gonna be hard finding one local.
Why not get coils? You said youre doing over fenders
springs + over fenders/flares = FAIL
Posted from Acurazine.com App for Android
04-16-2013, 10:31 PM
Drifting
Better to do it right the first time than have to go back and fiddle with everything again I'd say hold off until you have the funds to buy everything THEN do it
I'd say hold off until you have the funds to buy everything THEN do it
The following 2 users liked this post by MC MiYoung3269:
Bada$$VTEC (04-16-2013),
TLDude876 (04-16-2013)
04-16-2013, 10:55 PM
New Member
Originally Posted by MC MiYoung3269
Better to do it right the first time than have to go back and fiddle with everything again I'd say hold off until you have the funds to buy everything THEN do it
Posted from Acurazine.com App for Android
04-16-2013, 11:01 PM
Hell yeah 
Depends on how much you wanna spend
Depends on how much you wanna spend
04-16-2013, 11:15 PM
you got impact driver??? if so i might have to come over to do my brakes too haha
04-16-2013, 11:19 PM
New Member
Originally Posted by Bada$$VTEC
Quote:
Originally Posted by EvilVirus
Radically
Immature
Car
Enthusiasts
Racer
Hell yeah
Quote:
Originally Posted by slicksTSX
Yeah i hear you. I guess it wont be too bad riding stock for a couple of weeks.What's a descent set of coilovers for my tsx? A set that wont give harsh ride...
Posted from Acurazine.com App for Android
Depends on how much you wanna spend
Originally Posted by EvilVirus
Radically
Immature
Car
Enthusiasts
Racer
Hell yeah
Quote:
Originally Posted by slicksTSX
Yeah i hear you. I guess it wont be too bad riding stock for a couple of weeks.What's a descent set of coilovers for my tsx? A set that wont give harsh ride...
Posted from Acurazine.com App for Android
Depends on how much you wanna spend
Posted from Acurazine.com App for Android
04-16-2013, 11:20 PM
Cruisin'
04-16-2013, 11:51 PM
There's D2s,Tein SS,Function/Form type 2s,ksports,bc racing..
off all,i think the Teins is more smoother but wont slam like others
I drilled my shit out at Justins last year lol,
ill be ordering my rotors next week after payday
off all,i think the Teins is more smoother but wont slam like others
ill be ordering my rotors next week after payday
04-16-2013, 11:53 PM
04-17-2013, 12:36 AM
Instructor
never been a fan of buy a whole exhaust set up. But if I did it would be xlr8. Love how daniels car sounds.
04-17-2013, 07:23 AM
Dont even mess with the rotor screws.
Drill em out the first time.
or you'll be fighting and then result to a drill, when a drill could have taken it off the first time
Drill em out the first time.
or you'll be fighting and then result to a drill, when a drill could have taken it off the first time
04-17-2013, 08:00 AM
1.5" drop; max stiff damper setting - all around.
had to raise it up half an inch because it was making noises and for some reason my jpipe doesnt sit flush with the rest of the bottom, it hangs a bit lower. maybe the front end collision caused it to bend? idk lol but im happy with this set up. i aint bout dat low life lmao now time to save up for wheels
also i might do my brakes this sunday if it doesnt rain. stuff is supposed to be coming in on thurs/fri. gonna pick up some bottles of brake fluid tomorrow when i go to the dealership to get my tire all fixed up, caught a damn nail employee discount ftw
had to raise it up half an inch because it was making noises and for some reason my jpipe doesnt sit flush with the rest of the bottom, it hangs a bit lower. maybe the front end collision caused it to bend? idk lol but im happy with this set up. i aint bout dat low life lmao now time to save up for wheels
also i might do my brakes this sunday if it doesnt rain. stuff is supposed to be coming in on thurs/fri. gonna pick up some bottles of brake fluid tomorrow when i go to the dealership to get my tire all fixed up, caught a damn nail
employee discount ftw
I sell you my type-s wheels
I still have that straight pipe that connects from the jpipe down to the the y part of the exhaust. Its the stainless steel XLR8 Non Resonated pipe $$$ if interested.
The following 2 users liked this post by EvilVirus:
justnspace (04-17-2013),
MC MiYoung3269 (04-17-2013)
04-17-2013, 01:09 PM
wut
04-17-2013, 01:21 PM
LOL I did.
I saw the "wut"
I saw the "wut"
04-17-2013, 01:51 PM
Here I come!
Thread Starter
Is Waldo hiding in there?
04-17-2013, 04:21 PM
Gonna post who a few are,its basically describing things from the internets aka memes
She's on the bottom right,disaster girl
bottom left is lemonparty & the cup next to it is 2 girls one cup lol
Okay im done lol...cant post everything from the pic
She's on the bottom right,disaster girl
bottom left is lemonparty & the cup next to it is 2 girls one cup lol
Okay im done lol...cant post everything from the pic