TVandNav2Go is back with a special sale
#42
Originally Posted by Fulani has a TL
They usually ship same day, if you get the order in early enough in the day
I got a backup camera from costco, is there a way i can connect it to the DOM or do i have to get one of those camera from ebay in order for it to work?
#46
![Talking](https://acurazine.com/forums/images/icons/icon10.gif)
Hi lilasiian8
Hope all is well. Support is not an issue you can call us at 718-763-7367 Mon-Sat 8AM-5PM EST. NO Reason at ALL for the FTW!!! I have sold 100's of mods on this forum and there has never been any issues with us. So Please no FTW on our support. The switch is not bad you didn't ground the 2 white wires and the green wire. This is why video 1 works and video 2 doesn't. You can pay us via paypal to sales@tvandnav2go.com or via credit card. $215 total for PnP with shipping or $140 for non PnP with shipping. Please ask call Kim at 718-763-7367 to tell her what you paid for or what you want to order. All orders are shipped the same day. Feel free to call us at 718-763-7367. I will have Kim find the specs for the camera and will post the pictures for it sorry about that.
Thanks Dominic www.TVandNav2Go.com
Hope all is well. Support is not an issue you can call us at 718-763-7367 Mon-Sat 8AM-5PM EST. NO Reason at ALL for the FTW!!! I have sold 100's of mods on this forum and there has never been any issues with us. So Please no FTW on our support. The switch is not bad you didn't ground the 2 white wires and the green wire. This is why video 1 works and video 2 doesn't. You can pay us via paypal to sales@tvandnav2go.com or via credit card. $215 total for PnP with shipping or $140 for non PnP with shipping. Please ask call Kim at 718-763-7367 to tell her what you paid for or what you want to order. All orders are shipped the same day. Feel free to call us at 718-763-7367. I will have Kim find the specs for the camera and will post the pictures for it sorry about that.
Thanks Dominic www.TVandNav2Go.com
![Thumbs Up](https://acurazine.com/forums/images/smilies/thumbsup.gif)
Originally Posted by lilasiian8
Has anyone had problems with the switch wires (red/black)? My switch doesn't work
but the backup camera does. Please PM me if you can help. Thanks!! ![Smile](https://acurazine.com/forums/images/smilies/smile.gif)
![Frown](https://acurazine.com/forums/images/smilies/frown.gif)
![Smile](https://acurazine.com/forums/images/smilies/smile.gif)
Last edited by domofnavwithtv; 02-04-2008 at 05:51 PM.
#47
Hi Fulani has a TL
Hope all is well.
I will post the picture that I have on my PC at home tonight and then have Kim get the specs for it. I know you have been waiting ,very sorry about this.
Thanks Dominic www.TVandNav2Go.com
Hope all is well.
I will post the picture that I have on my PC at home tonight and then have Kim get the specs for it. I know you have been waiting ,very sorry about this.
Thanks Dominic www.TVandNav2Go.com
Originally Posted by Fulani has a TL
There are DIYs on how to install it such as this one, https://acurazine.com/forums/ramblings-12/predators-red-wings-137415/
In regards to purchasing via Paypal. Send a payment to sales@tvandnav2go.com and in the notes section, just put your name, number and exactly what you ordering. Then Call 718-763-7367 speak to Kim, let her know that you sent payment via paypal, and just tell her what you need. Simple as that.
I still wanna get a pic of the camera. DOM WHERE ARE YOU?! hope all is alright
In regards to purchasing via Paypal. Send a payment to sales@tvandnav2go.com and in the notes section, just put your name, number and exactly what you ordering. Then Call 718-763-7367 speak to Kim, let her know that you sent payment via paypal, and just tell her what you need. Simple as that.
I still wanna get a pic of the camera. DOM WHERE ARE YOU?! hope all is alright
#48
Instructor
Join Date: Oct 2001
Location: San Gabriel, Ca
Age: 40
Posts: 147
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by domofnavwithtv
Hi lilasiian8
Hope all is well. Support is not an issue you can call us at 718-763-7367 Mon-Sat 8AM-5PM EST. NO Reason at ALL for the FTW!!! I have sold 100's of mods on this forum and there has never been any issues with us. So Please no FTW on our support. The switch is not bad you didn't ground the 2 white wires and the green wire. This is why video 1 works and video 2 doesn't. You can pay us via paypal to sales@tvandnav2go.com or via credit card. $215 total for PnP with shipping or $140 for non PnP with shipping. Please ask call Kim at 718-763-7367 to tell her what you paid for or what you want to order. All orders are shipped the same day. Feel free to call us at 718-763-7367. I will have Kim find the specs for the camera and will post the pictures for it sorry about that.
Thanks Dominic www.TVandNav2Go.com![Thumbs Up](https://acurazine.com/forums/images/smilies/thumbsup.gif)
Hope all is well. Support is not an issue you can call us at 718-763-7367 Mon-Sat 8AM-5PM EST. NO Reason at ALL for the FTW!!! I have sold 100's of mods on this forum and there has never been any issues with us. So Please no FTW on our support. The switch is not bad you didn't ground the 2 white wires and the green wire. This is why video 1 works and video 2 doesn't. You can pay us via paypal to sales@tvandnav2go.com or via credit card. $215 total for PnP with shipping or $140 for non PnP with shipping. Please ask call Kim at 718-763-7367 to tell her what you paid for or what you want to order. All orders are shipped the same day. Feel free to call us at 718-763-7367. I will have Kim find the specs for the camera and will post the pictures for it sorry about that.
Thanks Dominic www.TVandNav2Go.com
![Thumbs Up](https://acurazine.com/forums/images/smilies/thumbsup.gif)
![Frown](https://acurazine.com/forums/images/smilies/frown.gif)
DOM'S CUSTOMER SERVICE IS THE BESTEST!! ORDER ASAP BEFORE THE SPECIAL IS OVER!
(I hope that makes up for what I've done)
#49
![Talking](https://acurazine.com/forums/images/icons/icon10.gif)
Hi lilasiian8
Hope all is well. No problem thanks for your support.
Thanks Dominic www.TVandNav2Go.com
Hope all is well. No problem thanks for your support.
Thanks Dominic www.TVandNav2Go.com
![Thumbs Up](https://acurazine.com/forums/images/smilies/thumbsup.gif)
Originally Posted by lilasiian8
Sorry for the mis-understand, when I said FTW, I meant "for the win". In other words, your customer service is great. I called and I think I talked to you earlier and everyone was helpful. I talked to Kim and my unit will arrive on Friday. Sorry for the mis-understanding. I know your product is very reliable and popular with all car forums.
DOM'S CUSTOMER SERVICE IS THE BESTEST!! ORDER ASAP BEFORE THE SPECIAL IS OVER!
(I hope that makes up for what I've done)
![Frown](https://acurazine.com/forums/images/smilies/frown.gif)
DOM'S CUSTOMER SERVICE IS THE BESTEST!! ORDER ASAP BEFORE THE SPECIAL IS OVER!
(I hope that makes up for what I've done)
#50
Sippy Cup (x2)
Join Date: Jun 2005
Location: Virginia Beach, VA
Age: 42
Posts: 1,961
Likes: 0
Received 9 Likes
on
3 Posts
Originally Posted by domofnavwithtv
Hi Fulani has a TL
Hope all is well.
I will post the picture that I have on my PC at home tonight and then have Kim get the specs for it. I know you have been waiting ,very sorry about this.
Thanks Dominic www.TVandNav2Go.com
Hope all is well.
I will post the picture that I have on my PC at home tonight and then have Kim get the specs for it. I know you have been waiting ,very sorry about this.
Thanks Dominic www.TVandNav2Go.com
#51
Professional Newbie
Join Date: Apr 2004
Location: Boston, MA
Age: 36
Posts: 1,197
Likes: 0
Received 0 Likes
on
0 Posts
I received my non-PNP today and I must say the instructions are not terribly helpful. Has anybody done a DIY post on the non-PNP?
If I get the PNP harness, what will that change? My biggest problem right now is that RGB connector with a ton of wires on it. Am I able to use T-taps on the navigation wires or will I actually have to cut them?
If I get the PNP harness, what will that change? My biggest problem right now is that RGB connector with a ton of wires on it. Am I able to use T-taps on the navigation wires or will I actually have to cut them?
#52
Hi
Kim sent you the sheet for the pin numbers of the RGB and sync for your car.
Here is an exaple of what you have to do.
You will cut the RED signal wire in half
Red will go towards the LCD screen Orange towards the Nav
You will cut the GREEN signal wire in half
GREEN will go towards the LCD screen Yellow towards the Nav
You will cut the BLUE signal wire in half
Blue will go towards the LCD screen Purple towards the Nav
You will cut the SYNC signal wire in half
GRAY will go towards the LCD screen Brown towards the Nav
The 2 black wires in the DB9 are ground.
On the Mod you will ground the 2 white wires and the green.
Blue goes to the 12V on the reverse lamp.
Mod then get 12v and ground.
The PnP is easier because you just plug it into the nav and supply 12V and ground.
Feel free to call me at 718-763-7367.
Thanks Dominic www.TVandNav2Go.com
Kim sent you the sheet for the pin numbers of the RGB and sync for your car.
Here is an exaple of what you have to do.
You will cut the RED signal wire in half
Red will go towards the LCD screen Orange towards the Nav
You will cut the GREEN signal wire in half
GREEN will go towards the LCD screen Yellow towards the Nav
You will cut the BLUE signal wire in half
Blue will go towards the LCD screen Purple towards the Nav
You will cut the SYNC signal wire in half
GRAY will go towards the LCD screen Brown towards the Nav
The 2 black wires in the DB9 are ground.
On the Mod you will ground the 2 white wires and the green.
Blue goes to the 12V on the reverse lamp.
Mod then get 12v and ground.
The PnP is easier because you just plug it into the nav and supply 12V and ground.
Feel free to call me at 718-763-7367.
Thanks Dominic www.TVandNav2Go.com
Originally Posted by madmanmax3000
I received my non-PNP today and I must say the instructions are not terribly helpful. Has anybody done a DIY post on the non-PNP?
If I get the PNP harness, what will that change? My biggest problem right now is that RGB connector with a ton of wires on it. Am I able to use T-taps on the navigation wires or will I actually have to cut them?
If I get the PNP harness, what will that change? My biggest problem right now is that RGB connector with a ton of wires on it. Am I able to use T-taps on the navigation wires or will I actually have to cut them?
#53
Sippy Cup (x2)
Join Date: Jun 2005
Location: Virginia Beach, VA
Age: 42
Posts: 1,961
Likes: 0
Received 9 Likes
on
3 Posts
^^Glad I got the PnP. Not that this is impossible, but definitely a lot easier. I installed the OEM Nav on my car so I am sure I could figure it out, but the PnP is definitely worth the money.
Not to be a PITA, but I am really looking to see the specs on that camera. I'd love to get my backup camera installed.
Not to be a PITA, but I am really looking to see the specs on that camera. I'd love to get my backup camera installed.
#54
Professional Newbie
Join Date: Apr 2004
Location: Boston, MA
Age: 36
Posts: 1,197
Likes: 0
Received 0 Likes
on
0 Posts
Thanks Dom, that definitely clears things up. I don't know why I was so confused last night, seems fairly straightforward, although I am not that interested in cutting my navigation wires. Mainly because if anything starts to go wrong with navigation, I would want to be able to quickly revert everything to stock to diagnose the problem.
Does anybody know what kind of connector the navigation wires I would need to cut use? Is it just a 20 pin Molex?
Does anybody know what kind of connector the navigation wires I would need to cut use? Is it just a 20 pin Molex?
#57
Hi
You need a 20 pin molex.
Thanks Dominic
You need a 20 pin molex.
Thanks Dominic
Originally Posted by madmanmax3000
Thanks Dom, that definitely clears things up. I don't know why I was so confused last night, seems fairly straightforward, although I am not that interested in cutting my navigation wires. Mainly because if anything starts to go wrong with navigation, I would want to be able to quickly revert everything to stock to diagnose the problem.
Does anybody know what kind of connector the navigation wires I would need to cut use? Is it just a 20 pin Molex?
Does anybody know what kind of connector the navigation wires I would need to cut use? Is it just a 20 pin Molex?
#59
horny =
iTrader: (1)
Originally Posted by Fulani has a TL
DOM!!!! Wheres the pics man... I wanna place my order but waiting to see the pics to see if I should get the camera from you!
![](http://www.tvandnav2go.com/images/Camera%20Resize.jpg)
I would like to do this as well and would like to not have to purchase the camera seperate.
![Dunno](https://acurazine.com/forums/images/smilies/dunno.gif)
#60
Professional Newbie
Join Date: Apr 2004
Location: Boston, MA
Age: 36
Posts: 1,197
Likes: 0
Received 0 Likes
on
0 Posts
I had the lady that works there send me a picture a few days back.
Here it is:
http://pictures.aol.com/ap/singleIma...v4xQp5Fd3Ig%3D
The one you just posted is their through-keyhole camera, which they also sell
Apparently both cameras are $195
Here it is:
http://pictures.aol.com/ap/singleIma...v4xQp5Fd3Ig%3D
The one you just posted is their through-keyhole camera, which they also sell
Apparently both cameras are $195
#61
Sippy Cup (x2)
Join Date: Jun 2005
Location: Virginia Beach, VA
Age: 42
Posts: 1,961
Likes: 0
Received 9 Likes
on
3 Posts
Madman, I like the one you posted above. Do you have any specs on it or even the model number/manufacturer? I think I'd like to purchase that one but I'd have to look into the specs. The price seems a little high unless it is an extremely good camera.
#65
Hi
Kim called the manufactuer and they are going to email us full specs. Yes it is an expensive camera but it is 1 of the best around. Like everything else in this world you can get a camera for $75 or $250 both take pictures but not of the same quality. I have an Ipod interface I need a forum member to test for me. Can a member please call me and I will send it to you to test. I will need you to take pictures and post them for me. 718-763-7367
Thanks Dominic www.TVandNav2Go.com
Kim called the manufactuer and they are going to email us full specs. Yes it is an expensive camera but it is 1 of the best around. Like everything else in this world you can get a camera for $75 or $250 both take pictures but not of the same quality. I have an Ipod interface I need a forum member to test for me. Can a member please call me and I will send it to you to test. I will need you to take pictures and post them for me. 718-763-7367
Thanks Dominic www.TVandNav2Go.com
Originally Posted by bent09
That is what I was thinking.
#67
Sexiest NBP.. inthemaking
Join Date: Oct 2007
Location: Vancouver, BC
Age: 35
Posts: 204
Likes: 0
Received 0 Likes
on
0 Posts
yea, 195 for the cam is quite expensive, i was ready to order my unit till i found out wendy does not deliver to canada =\.. so i was thinking of going with a cam from dom, but then $440 to get JUST the parts, (no labour) i need to install a backup cam that i dunt kno nothing about yet...
#69
Sippy Cup (x2)
Join Date: Jun 2005
Location: Virginia Beach, VA
Age: 42
Posts: 1,961
Likes: 0
Received 9 Likes
on
3 Posts
Originally Posted by OmeGa101
yea, 195 for the cam is quite expensive, i was ready to order my unit till i found out wendy does not deliver to canada =\.. so i was thinking of going with a cam from dom, but then $440 to get JUST the parts, (no labour) i need to install a backup cam that i dunt kno nothing about yet...
#71
Instructor
Join Date: Oct 2001
Location: San Gabriel, Ca
Age: 40
Posts: 147
Likes: 0
Received 0 Likes
on
0 Posts
I got my replacement box today! It's great! Dominic and Kim are great people. They're very helpful and are there if you've got a problem! I highly recommend this product, not only because it works but because of the great support behind it! w00t! ![Smile](https://acurazine.com/forums/images/smilies/smile.gif)
I'm happy!
![Smile](https://acurazine.com/forums/images/smilies/smile.gif)
I'm happy!
#73
Team ABP member
Originally Posted by OmeGa101
Special Should go till END of February. Dominic is on vacation until the 25th
#74
Advanced
iTrader: (1)
Join Date: May 2007
Location: Houston, TX
Age: 38
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by sxlova07
is this offical? I'll be upset if I missed out on this
![Thumbs Up](https://acurazine.com/forums/images/smilies/thumbsup.gif)
Originally Posted by domofnavwithtv
Hi Misfit]
Thank you
OEM camera will still work no problem and yes you still have 2 inputs. I will extend promo till end of FEB. Feel free to call me at 718-763-7367 or email me at sales@tvandnav2go.com
Thanks Dominic![Thumbs Up](https://acurazine.com/forums/images/smilies/thumbsup.gif)
Thank you
OEM camera will still work no problem and yes you still have 2 inputs. I will extend promo till end of FEB. Feel free to call me at 718-763-7367 or email me at sales@tvandnav2go.com
Thanks Dominic
![Thumbs Up](https://acurazine.com/forums/images/smilies/thumbsup.gif)
#78
hey dom.. is me the guy with the 2004 acura tsx.. remember i went to ur shop and took a module with the pnp.. i installed everything last week with the camera and boy is this module very good.. i see u got a website u want some piks to show..let me know so i could take some for ur website or mayb show others..
![Thumbs Up](https://acurazine.com/forums/images/smilies/thumbsup.gif)
#80
Sippy Cup (x2)
Join Date: Jun 2005
Location: Virginia Beach, VA
Age: 42
Posts: 1,961
Likes: 0
Received 9 Likes
on
3 Posts
Originally Posted by offsight204
hey dom.. is me the guy with the 2004 acura tsx.. remember i went to ur shop and took a module with the pnp.. i installed everything last week with the camera and boy is this module very good.. i see u got a website u want some piks to show..let me know so i could take some for ur website or mayb show others.. ![Thumbs Up](https://acurazine.com/forums/images/smilies/thumbsup.gif)
![Thumbs Up](https://acurazine.com/forums/images/smilies/thumbsup.gif)