ATTENTION!! Calling all 562/310/714/626/818/323/213 SO-CAL PART V
#5082
For Josh...
#5087
I drive a Subata.
iTrader: (1)
wtf is AU meet
#5095
Not I. Beddy time in a little bit.
#5097
#5104
Three Wheelin'
iTrader: (3)
So I was wondering, if you lower your car wouldn't you need to adjust the headlights to aim a little higher because they're set at a certain height at stock height and if you lower it then that means it'll light up the floor more than what's in front right? So, I need to fix my headlights?
#5105
Three Wheelin'
iTrader: (3)
So I was wondering, if you lower your car wouldn't you need to adjust the headlights to aim a little higher because they're set at a certain height? if you lower it then that means it'll light up the floor more than what's in front right? So, I need to fix my headlights?
5 minute edit was up.
5 minute edit was up.
#5106
I ♡ PEK PEK
iTrader: (6)
Join Date: Feb 2009
Location: Across the River from Manhattan
Posts: 988
Likes: 0
Received 0 Likes
on
0 Posts
^ it all depends, a properly aimed headlight is supposed to shine 2" below the headlight height. Will lowering affect this, it might....best way to tell is find some flat ground and a wall. Drive your car as close to that wall as possible. Mark your car's cutoff line with some blue tape. Drive back ~ 25 ft, your car's cutoff line should shine 2" below your mark. I have mine adjusted 1" to compensate for my rake. Hope this helps....
#5110
Regional Coordinator (SoCal)
iTrader: (1)
So I was wondering, if you lower your car wouldn't you need to adjust the headlights to aim a little higher because they're set at a certain height at stock height and if you lower it then that means it'll light up the floor more than what's in front right? So, I need to fix my headlights?
#5112
I drive a Subata.
iTrader: (1)
morninggggggggggg
#5114
I drive a Subata.
iTrader: (1)
this saturday, does anybody have like 30 minutes to help me install my motor mount?
#5115
I drive a Subata.
iTrader: (1)
i don't have breaker bar and torque wrench... that's why. it's a 15 min job with right tools..
#5116
I drive a Subata.
iTrader: (1)
oh yeah if someone has ramps or jack stands, it'll be shorter probably..
i really want to install this!
anyone in LA area? I can drive to your place or something for sure..
i really want to install this!
anyone in LA area? I can drive to your place or something for sure..
#5119
I drive a Subata.
iTrader: (1)
guppies meet tonight? the one off 605 right?
#5120
I drive a Subata.
iTrader: (1)
i'd love to joinnnn if it's not too late