CDT Audio Speakers, XTANTAmp, JL Audio Amp
Thread Starter
I ♡ PEK PEK
iTrader: (6)
Joined: Feb 2009
Posts: 988
Likes: 0
From: Across the River from Manhattan
CDT Audio Speakers, XTANTAmp, JL Audio Amp
Cleaning out my garage trying to get rid of some stuff. System was from my 06' Maxima, installed and used in vehicle for a maximum of 3 months, removed from vehicle when I sold it, kept in storage since then. Was planning to install on the CL-S, but I actually like the Bose.
Recently tested and everything works.
CDT Audio ES-630 6.5" Braxial System Retailed for $650 when new. $200 obo
Detailed Description
# Braxial Mounted Tweeter
# * ES-620
# * 6.5" Kevlar Fabric Cone with semi soft poly dome
# * Butyl rubber surround
# * DRT-26 26MM Competition Silk Dome Tweeter
# * Power Handling 130w RMS
# * Frequency Response 65-20kHz
# * Sensitivity 91.5 dB
# * ES-200z zone adapter "Transient Optimized" 2-way xover



JL Audio 500/5, 5 Channel Amplifier $175 obo
Specifications:
Front Channels: 100 W RMS x 2 @ 1.5 ohm-4 ohm (11V-14.5V)
Rear Channels: 25 W RMS x 2 @ 1.5 ohm-4 ohm (11V-14.5V)
Subwoofer Channel: 250 W RMS @ 1.5 ohm-4 ohm (11V-14.5V) THD
Front Crossover: fully-variable (50 Hz-5 KHz),
selectable-slope BP or HP (12 or 24 dB per octave)
Rear Crossover: fully-variable (50 Hz-5 KHz), selectable-slope HP (12 or 24 dB per octave)
Sub Crossover: fully-variable (40-200 Hz) selectable-slope LP (12 or 24 dB per octave)


Xtant 400.4, 4 Channel Amplifier $75 obo
Specifications
Watts per Channel 4 Ohm 50 x 4
Watts per Channel 2 Ohm 100 x 4
Bridged Mono at 4 Ohm 2 x 200

All prices above do not include shipping or Paypal fees, if any.
Thanks for looking!
Recently tested and everything works.CDT Audio ES-630 6.5" Braxial System Retailed for $650 when new. $200 obo
Detailed Description
# Braxial Mounted Tweeter
# * ES-620
# * 6.5" Kevlar Fabric Cone with semi soft poly dome
# * Butyl rubber surround
# * DRT-26 26MM Competition Silk Dome Tweeter
# * Power Handling 130w RMS
# * Frequency Response 65-20kHz
# * Sensitivity 91.5 dB
# * ES-200z zone adapter "Transient Optimized" 2-way xover



JL Audio 500/5, 5 Channel Amplifier $175 obo
Specifications:
Front Channels: 100 W RMS x 2 @ 1.5 ohm-4 ohm (11V-14.5V)
Rear Channels: 25 W RMS x 2 @ 1.5 ohm-4 ohm (11V-14.5V)
Subwoofer Channel: 250 W RMS @ 1.5 ohm-4 ohm (11V-14.5V) THD
Front Crossover: fully-variable (50 Hz-5 KHz),
selectable-slope BP or HP (12 or 24 dB per octave)
Rear Crossover: fully-variable (50 Hz-5 KHz), selectable-slope HP (12 or 24 dB per octave)
Sub Crossover: fully-variable (40-200 Hz) selectable-slope LP (12 or 24 dB per octave)


Xtant 400.4, 4 Channel Amplifier $75 obo
Specifications
Watts per Channel 4 Ohm 50 x 4
Watts per Channel 2 Ohm 100 x 4
Bridged Mono at 4 Ohm 2 x 200

All prices above do not include shipping or Paypal fees, if any.
Thanks for looking!
Trending Topics
Thread Starter
I ♡ PEK PEK
iTrader: (6)
Joined: Feb 2009
Posts: 988
Likes: 0
From: Across the River from Manhattan
Thread
Thread Starter
Forum
Replies
Last Post
navtool.com
5G TLX Audio, Bluetooth, Electronics & Navigation
31
Nov 16, 2015 08:30 PM
InFaMouSLink
Car Parts for Sale
3
Oct 30, 2015 09:43 AM
navtool.com
1G RDX Audio, Bluetooth, Electronics & Navigation
1
Sep 25, 2015 05:15 PM



