4G Wheel/Tire specs thread with pics
#241
UA9 SH-AWD
iTrader: (11)
@ omgitsspooky
Thanks for the compliment. Haven't taken any recent pics of the enkei's nor the car lately due to work, but I'll do what I can once the weather clears up a bit.
@ SoL_TeK
Appreciate it.
Purchased the lug nuts from a place called 1320 Performance. The color I got is in gold which is hard to find for our 4th gen and still hasn't faded yet 1320 Performance Extended Lug nuts I mentioned them to a few members about it. You can also find them a lil cheaper on ebay as well & they'll match the prices on ebay. Last time I remember they had about 7-8 different colors to choose from in our size which is 14x1.5. Just make sure you get the right lug seats. Hope this helps.
Thanks for the compliment. Haven't taken any recent pics of the enkei's nor the car lately due to work, but I'll do what I can once the weather clears up a bit.
@ SoL_TeK
Appreciate it.
Purchased the lug nuts from a place called 1320 Performance. The color I got is in gold which is hard to find for our 4th gen and still hasn't faded yet 1320 Performance Extended Lug nuts I mentioned them to a few members about it. You can also find them a lil cheaper on ebay as well & they'll match the prices on ebay. Last time I remember they had about 7-8 different colors to choose from in our size which is 14x1.5. Just make sure you get the right lug seats. Hope this helps.
#242
#244
CarbonTSEX you gotta be able to help me running those BC racing cool overs with extreme drop. I have an Acura TL 2010 sh awd two days ago I had the BC coil overs BR type installed and the front sits really low its already broken off the plastic engine guard underneath the car. What the heck did u do to even get a lip kit on yours dropped so low. I'm afraid to even get the lip kit I feel like I'll just have to leave the car parked if I do that lol. Also (may sound dumb) but how do most people get low offsets to fit if I'm always being recommended 40-55?
The following users liked this post:
carbonTSEX (01-27-2017)
#245
Instructor
Enkei TY-5 as requested
@SoL_TeK so do you have more pics on your sitting on those TY-5? looking forward for more pics....
I was planning to either get the diamond cuts just like yours or the Advance wheels, but wanted a more aggressive look along with value and can't forget about lightweight and not to mention dependability and build quality to the smallest details. The Enkei's without a doubt is hands down the best shoes I've had so far besides my 57 getter(MF) which cost damn near 4x's more.
Front passenger shot
g-Force COMP 2 A/S
I was planning to either get the diamond cuts just like yours or the Advance wheels, but wanted a more aggressive look along with value and can't forget about lightweight and not to mention dependability and build quality to the smallest details. The Enkei's without a doubt is hands down the best shoes I've had so far besides my 57 getter(MF) which cost damn near 4x's more.
Front passenger shot
g-Force COMP 2 A/S
The following 3 users liked this post by Soal Man:
#246
UA9 SH-AWD
iTrader: (11)
@Soal Man man those look super nice man! I really like the look on those than on my diamond cut. I just looked them up and those TY-5 are machined black,so it adds a very nice unique look. I would really like to see how those would look on a white TL, and they look way lighter than stock, in which I would be in favor of. Thanks for the pics man! your car looks sharp.
The following users liked this post:
Soal Man (01-24-2024)
#247
Instructor
@Soal Man man those look super nice man! I really like the look on those than on my diamond cut. I just looked them up and those TY-5 are machined black,so it adds a very nice unique look. I would really like to see how those would look on a white TL, and they look way lighter than stock, in which I would be in favor of. Thanks for the pics man! your car looks sharp.
Damn, thought I posted more pics from last night to show members how the Enkei sits. Hope this helps.
Last edited by Soal Man; 01-27-2017 at 05:42 PM.
#248
Instructor
(driver side shot) Fender to wheel you can see that its only off by a few mm.
Fitment from a slightly lower angle (slight neg. camber 1.2/all within factory specs.)
She loves doing squats on a daily.
Fitment from a slightly lower angle (slight neg. camber 1.2/all within factory specs.)
She loves doing squats on a daily.
Last edited by Soal Man; 01-27-2017 at 06:47 PM.
#249
UA9 SH-AWD
iTrader: (11)
Thanks. Your right about the finish and theres also 3 different colors to choose from, mine being Pearl Black is a limited production. Whatever you decide to choose I'm sure it'll suite to your own style and preference. Tire Rack has a media gallery for you to help you choose all that. Seen all 3 in person and to me the Pearl suites my style and perfectly matches the GLM color just right https://www.tirerack.com/wheels/Whee...=Black+Painted
Damn, thought I posted more pics from last night to show members how the Enkei sits. Hope this helps.
Damn, thought I posted more pics from last night to show members how the Enkei sits. Hope this helps.
#250
Instructor
No problem at all. If your planning to get the same or similar setup in the future just hmu have several places in Socal or Norcal that I know of who's willing to compete for your business for the low low.
#252
Instructor
I like how she is currently sitting. Well executed. Glad to see more GLM on here
weds maverick 710s
19x10 squared setup
+30 front +25 rear
toyo t1r
255/35r19
tein SA
rear fenders rolled, rear tires hitting rear bumper tabs when the car bounces, currently looking for ways to relocate or shave
here r a few cell phone pics, waiting for better weather to take some proper pics
19x10 squared setup
+30 front +25 rear
toyo t1r
255/35r19
tein SA
rear fenders rolled, rear tires hitting rear bumper tabs when the car bounces, currently looking for ways to relocate or shave
here r a few cell phone pics, waiting for better weather to take some proper pics
Last edited by Soal Man; 01-30-2017 at 02:26 AM.
The following users liked this post:
SoL_TeK (02-01-2017)
#253
Instructor
CarbonTSEX you gotta be able to help me running those BC racing cool overs with extreme drop. I have an Acura TL 2010 sh awd two days ago I had the BC coil overs BR type installed and the front sits really low its already broken off the plastic engine guard underneath the car. What the heck did u do to even get a lip kit on yours dropped so low. I'm afraid to even get the lip kit I feel like I'll just have to leave the car parked if I do that lol. Also (may sound dumb) but how do most people get low offsets to fit if I'm always being recommended 40-55?
#254
Question on your setup
I guess I'm a little scared as to my last wheel endeavor which wasn't fun lol and I just got this TL and I don't really want to do anything too crazy, just a little ya know....Thanks in advance!
#256
I've been doing tons of research on wheels the past 3 weeks. That offset is wayyyyy to low and your scrub radius would be insane. Your wheels would stick out ridiculously. The handling of your car would be extremely affected and I would advise you to stay above +35. The closer to factory specs you stay, the better off you'll be without running into any problems. If you deviate from spec, use math the correct the difference i.e. if your rims are wider, then calculate the correct offset to keep close to spec. Also check out this handy page. Hope that helps.
The following users liked this post:
Ablest31 (03-13-2017)
#257
I've been doing tons of research on wheels the past 3 weeks. That offset is wayyyyy to low and your scrub radius would be insane. Your wheels would stick out ridiculously. The handling of your car would be extremely affected and I would advise you to stay above +35. The closer to factory specs you stay, the better off you'll be without running into any problems. If you deviate from spec, use math the correct the difference i.e. if your rims are wider, then calculate the correct offset to keep close to spec. Also check out this handy page. Hope that helps.
Last edited by Ablest31; 03-13-2017 at 08:51 AM.
#258
The Original Shawdy
I've been doing tons of research on wheels the past 3 weeks. That offset is wayyyyy to low and your scrub radius would be insane. Your wheels would stick out ridiculously. The handling of your car would be extremely affected and I would advise you to stay above +35. The closer to factory specs you stay, the better off you'll be without running into any problems. If you deviate from spec, use math the correct the difference i.e. if your rims are wider, then calculate the correct offset to keep close to spec. Also check out this handy page. Hope that helps.
#259
Actually they will fit. I have 20x9 +16 on 235/30/20 and 20x10.5 +25 on 255/30/20. Tires were Nitto Invo's and off a M5. To get them to fit, they had to have a slight stretch and lower profile. Also the rear fenders had to be rolled flat. I was able to run them without rubbing on coilovers and I was able to tuck them when aired out with some camber adjustment.
#260
The Original Shawdy
I still had great handling and power. But they did prevent me from gaining another 10hp/10tq during my dyno tune. There's pros and cons.
#261
19" KMC District 685 on 2012 4G TL
This was an awesome post so I had to add mine. Finally done....
1. KMC District 685
2. 19 x 8.5
3. +35mm (stock is +55mm)
4. Michelin Pilot Sport A/S 3+
5. 255/40R19
6. Not lowered
7. Once on large dip after Massachusetts bridge abutment doing a bit over the speed limit...
8. Stock transmission (anyone had torque converter failures?)
9. Pictures :-)....
10. Curious if anyone has installed RV6 performance parts on their 4G TL? More sound in the cabin below 3,000 rpm?
1. KMC District 685
2. 19 x 8.5
3. +35mm (stock is +55mm)
4. Michelin Pilot Sport A/S 3+
5. 255/40R19
6. Not lowered
7. Once on large dip after Massachusetts bridge abutment doing a bit over the speed limit...
8. Stock transmission (anyone had torque converter failures?)
9. Pictures :-)....
10. Curious if anyone has installed RV6 performance parts on their 4G TL? More sound in the cabin below 3,000 rpm?
#262
New Shoes
New wheel after factorys were stolen!
1. Stance sf01
2. 20x10 square
3. +40mm
4. Nankang noble sport
5. 245/35/20
6. Not lowered (thinking springs 1inch front .5inch rear)
7. Not that I have notice only 250miles so far
8. Sh-awd auto
1. Stance sf01
2. 20x10 square
3. +40mm
4. Nankang noble sport
5. 245/35/20
6. Not lowered (thinking springs 1inch front .5inch rear)
7. Not that I have notice only 250miles so far
8. Sh-awd auto
Last edited by Dakydd; 03-26-2017 at 03:38 PM. Reason: adding some features
#263
Instructor
But I say skip springs and go straight to coils. You might end up not liking the springs. They tend to ruin the stock struts on the car and you'll need to replace em later down the road.
#264
Gotcha still up in the air...springs or coils...leaning toward coils for great flexibility...
#265
Intermediate
#266
Intermediate
love the 19's, are u on natural camber?
1. Brand Of Rims: BMW Style 95 (off of 745i)
2. Size Of Rims: 19x9 (F) 19x10 (R)
3. Offset: +24 all around
4. Brand Of Tire: Achilles ATR Sport 2
5. Tire Size: 245/40R19 all around
6. Drop Type and Amount:
BC Racing BR type, tires tucking slightly. Front camber at -2.4*, rear at -3.0*
7. Do they rub:
They did... Front and rear fenders rolled, Front and rear bumper mounting tabs relocated. No more rubbing.
8. Transmission type: Auto
9. Picture:
2. Size Of Rims: 19x9 (F) 19x10 (R)
3. Offset: +24 all around
4. Brand Of Tire: Achilles ATR Sport 2
5. Tire Size: 245/40R19 all around
6. Drop Type and Amount:
BC Racing BR type, tires tucking slightly. Front camber at -2.4*, rear at -3.0*
7. Do they rub:
They did... Front and rear fenders rolled, Front and rear bumper mounting tabs relocated. No more rubbing.
8. Transmission type: Auto
9. Picture:
#267
1. Brand Of Rims: Enkei TY-5 Pearl Black
2. Size Of Rims: 19x9.5
3. Offset: +35
4. Brand Of Tire: Firestone Firehawk Indy 500
5. Tire Size: 245/40
6. Drop Type and Amount: Tein Street Advance
7. Do they rub: No. Rear fenders rolled.
8. Transmission type: Auto
Thanks to Soal Man for helping me with choosing these wheels!
2. Size Of Rims: 19x9.5
3. Offset: +35
4. Brand Of Tire: Firestone Firehawk Indy 500
5. Tire Size: 245/40
6. Drop Type and Amount: Tein Street Advance
7. Do they rub: No. Rear fenders rolled.
8. Transmission type: Auto
Thanks to Soal Man for helping me with choosing these wheels!
#268
The inconvenient truth
brand: VooDoo, 20x8.5
Tires Nexen N3000
Suspention: sock
No rub
transmission Auto
Note I bought these rims for a different car that I sold and my acura came with winter tires so I put these on.
Soon to come: Color matched rear window lip arrived today (putting on tomorrow), brake calipers, Adjustable lowering coils, Debadge trunk
Any suggestions?
Tires Nexen N3000
Suspention: sock
No rub
transmission Auto
Note I bought these rims for a different car that I sold and my acura came with winter tires so I put these on.
Soon to come: Color matched rear window lip arrived today (putting on tomorrow), brake calipers, Adjustable lowering coils, Debadge trunk
Any suggestions?
#269
The inconvenient truth
#270
Instructor
1. Brand Of Rims: Enkei TY-5 Pearl Black
2. Size Of Rims: 19x9.5
3. Offset: +35
4. Brand Of Tire: Firestone Firehawk Indy 500
5. Tire Size: 245/40
6. Drop Type and Amount: Tein Street Advance
7. Do they rub: No. Rear fenders rolled.
8. Transmission type: Auto
Thanks to Soal Man for helping me with choosing these wheels!
2. Size Of Rims: 19x9.5
3. Offset: +35
4. Brand Of Tire: Firestone Firehawk Indy 500
5. Tire Size: 245/40
6. Drop Type and Amount: Tein Street Advance
7. Do they rub: No. Rear fenders rolled.
8. Transmission type: Auto
Thanks to Soal Man for helping me with choosing these wheels!
Looks immaculate in BWP
#271
I'll contribute to this thread.
1.Brand of Rim - Niche Verona M150
2.Rim size (diameter and width) - 20x10.5
3.Offset - +35
4.Brand of tire - Toyo Proxes 4 Plus
5.Tire size - 245/35/20
6.Drop Type and Amount - Tein SS
7.Do they rub - Occasional on big dips going fast; fenders rolled
8. Transmission type - 6MT
9. Picture -
1.Brand of Rim - Niche Verona M150
2.Rim size (diameter and width) - 20x10.5
3.Offset - +35
4.Brand of tire - Toyo Proxes 4 Plus
5.Tire size - 245/35/20
6.Drop Type and Amount - Tein SS
7.Do they rub - Occasional on big dips going fast; fenders rolled
8. Transmission type - 6MT
9. Picture -
I wonder if this will fit the FWD's the same?..
#272
Burning Brakes
Thanks and yes front and back. U can run the same on FWD. Rubs a little with people in the back depending on their weight. 2 passenger is my limit unless it's kids. FYI: I no longer have these wheels and have gone with a different setup since last year. I want to post pics but just haven't made the time.
#273
Thanks and yes front and back. U can run the same on FWD. Rubs a little with people in the back depending on their weight. 2 passenger is my limit unless it's kids. FYI: I no longer have these wheels and have gone with a different setup since last year. I want to post pics but just haven't made the time.
#274
Thanks and yes front and back. U can run the same on FWD. Rubs a little with people in the back depending on their weight. 2 passenger is my limit unless it's kids. FYI: I no longer have these wheels and have gone with a different setup since last year. I want to post pics but just haven't made the time.
#275
Thanks and yes front and back. U can run the same on FWD. Rubs a little with people in the back depending on their weight. 2 passenger is my limit unless it's kids. FYI: I no longer have these wheels and have gone with a different setup since last year. I want to post pics but just haven't made the time.
#277
Burning Brakes
No issues at all. I curbed up the wheels pretty badly lol and wanted a different look as well. Fortunately, I was still able to sell them and recoup some money. Went with a less aggressive setup to not stretch the tires since that's how I curbed the wheels because the lips were so exposed. This time I bought some JDM wheels which were not cheap because they are forged but I liked the look, color and it's lightweight. Took like 3 or 4 months to get here as well.
#279
2012 TL- Avat-AV3s
1.Brand of Rim -Avat-AV3
2.Rim size (diameter and width) -19" front's 8.5, rears 9.5
3.Offset -+40
4.Brand of tire -Mayrun
5.Tire size - front-245/30/19, rear - 275/30/19
6.Drop Type and Amount - NA
7.Do they rub - ni
8. Transmission type - auto
9. Picture -[/QUOTE]
2.Rim size (diameter and width) -19" front's 8.5, rears 9.5
3.Offset -+40
4.Brand of tire -Mayrun
5.Tire size - front-245/30/19, rear - 275/30/19
6.Drop Type and Amount - NA
7.Do they rub - ni
8. Transmission type - auto
9. Picture -[/QUOTE]
#280
I'll contribute to this thread.
1.Brand of Rim - Niche Verona M150
2.Rim size (diameter and width) - 20x10.5
3.Offset - +35
4.Brand of tire - Toyo Proxes 4 Plus
5.Tire size - 245/35/20
6.Drop Type and Amount - Tein SS
7.Do they rub - Occasional on big dips going fast; fenders rolled
8. Transmission type - 6MT
9. Picture - Attachment 47385
1.Brand of Rim - Niche Verona M150
2.Rim size (diameter and width) - 20x10.5
3.Offset - +35
4.Brand of tire - Toyo Proxes 4 Plus
5.Tire size - 245/35/20
6.Drop Type and Amount - Tein SS
7.Do they rub - Occasional on big dips going fast; fenders rolled
8. Transmission type - 6MT
9. Picture - Attachment 47385
whats the bumper?