brandon7583

iTrader: (2)

We needed a Wheel/Tire specs thread with pics for 4Gs

Please everyone list your set ups (no stock set ups)

1.Brand of Rim -
2.Rim size (diameter and width) -
3.Offset -
4.Brand of tire -
5.Tire size -
6.Drop Type and Amount -
7.Do they rub -
8. Transmission type -
9. Picture -

brandon7583

iTrader: (2)

1.Brand of Rim -asa gt5
2.Rim size (diameter and width) - 20x10
3.Offset - 28 also running 5mm spacer in front and 8mm in rear
4.Brand of tire - hankook
5.Tire size -245/35/20
6.Drop Type and Amount - tein basic
7.Do they rub - once in a while
8. Transmission type - manual
9. Picture -

sympley

1.Brand of Rim - Rufino
2.Rim size (diameter and width) - Front 20x9, Rear 20x 10.5
3.Offset - 55
5.Tire size -245/35/20
6.Drop Type and Amount - tein SS with controller
7.Do they rub - No
8. Transmission type - manual

I also rolled the fenders.

wreak

1.Brand of Rim - Avarus
2.Rim size (diameter and width) - 19x8.5
3.Offset - +45
4.Brand of tire - Kumho Estca 4X
5.Tire size - 245/40
6.Drop Type and Amount - oem
7.Do they rub - no
8. Transmission type - 6spd auto

791476e5-9613-4878-a02c-cd0cfc83bd26_zps01bc9a85.jpg?t=1371312130

potmilkz

sympley.. are you sure those are +55 offset?...

ucf_bronco

iTrader: (1)

1. Brand of Rim - XO Paris
2. Rim size (diameter and width) - 20" x 8.5"
3. Offset - +35
4. Brand of tire - Hankook Ventus V4
5. Tire size - 255/35/20
6. Drop Type and Amount - stock suspension
7. Do they rub - rear only, rolled fenders
8. Transmission type - 6MT

wreak

Well that's stupid I can't edit my post I was going to put up a newer photo so here it is in another post...

brandon7583

iTrader: (2)

No way those are +55

KaleZ

Your ride is dope! Love the wheels!

Mr Marco

DOPE? Nope...

Treblig

1.Brand of Rim - Ace
2.Rim size (diameter and width) - 19x8.5
3.Offset - +40mm
4.Brand of tire - Continental Extreme Contact DW
5.Tire size - 255/40x19
6.Drop Type and Amount - 0
7.Do they rub - No
8. Transmission type - Auto
9. Picture -

jvindyex33

I know I'm late to this thread, but your ride looks stellar to me. I wouldn't mind doing about the same to mine, minus the occasional rubbing. I have a `10 / TL / SH-AWD / 6MT / DIA.PEARL I haven't done anything to but get some nice 20% infared blocking tint. I'm doing my research now before I end up buying something I don't like. Thatnks for the post! Definitely helped my eyes a bit

ngravatt

[/QUOTE]

are those the RDX brake covers?

Treblig

are those the RDX brake covers?[/QUOTE]

No, they are actually MGP Caliper Covers.

HeartTLs

iTrader: (5)

Can we have this sticky-ed?

si1point6

I second that motion. The first thing other members do when they see a photo of new wheels and tires is to ask what are the specs are of each. Stickying this post would help members from having to hunt for wheel/tire posts of others in the various 4g sub-forums and the main forum when trying to decide on a new setup themselves (me included). I also think stickying this post may have prevented one member from selling is previous wheels to get a wider stance. The sticky may have prevented another member from tearing up his sidewalls for selecting tires much too wide for the wheel offset he chose.

Aerok1

^ I Agee

Brock79

This is a good thread, other members should really add to the list, that do have aftermarket wheels.

Jackieee_TL

1.Brand of Rim - Avant Garde
2.Rim size (diameter and width) - 20x10
3.Offset - +35
4.Brand of tire - Nankang
5.Tire size - 245/35
6.Drop Type and Amount - ISC Coils
7.Do they rub - After rolled fenders, Nope
8. Transmission type - AT
9. Picture -

HeartTLs

iTrader: (5)

^^

Awesome pic, I love AG wheels, I just wish they're weren't so heavy. Oddly the cast designs IMO are better looking than the forged ones. I like the spoes on M550/590 more than F330/310.

TeamAcura

I'll contribute to this thread.

1.Brand of Rim - Niche Verona M150
2.Rim size (diameter and width) - 20x10.5
3.Offset - +35
4.Brand of tire - Toyo Proxes 4 Plus
5.Tire size - 245/35/20
6.Drop Type and Amount - Tein SS
7.Do they rub - Occasional on big dips going fast; fenders rolled
8. Transmission type - 6MT
9. Picture -

Jackieee_TL

^^Looks awesome TA!!

potmilkz

1.Brand of Rim - 5zigen hyper 5zr 3 piece wheels
2.Rim size (diameter and width) - 20x9.5
3.Offset - +12 squared set
4.Brand of tire - Falken pt722
5.Tire size - 255/35/20 all around
6.Drop Type and Amount - Tein SS lowered to max
7.Do they rub - no rubbing unless i turn my wheel all the way.
8. Transmission type - AUTOMATIC
9. Picture -

Rock0007

Hey everyone, this community is so very informative, This thread alone is a goldmine.

I'm a total noob here and have a 4G 09 TL SHAWD polished metal with the stock aero kit, this is my DD.

I would like these: http://nicheroadwheels.com/lucerne-m142-w-12116.htm
at 9" with 245/35 rubber.

The guy at my local tire shop said the 9" would be a problem with the +35 offset. This wheel does not come with a higher offset at that bolt pattern (5x120) according to the spec sheet on the niche website.

Not intending on lowering it but its not out of the question.

please comment on the fitment of a 9" wide wheel with 245/35 rubber, will these stick out too far? problems? look and stance? Camber kit?

Obviously throughout this forum and on this thread people are running more aggressive set-ups so I'm assuming my tire shop guys is clueless.

Thank you. Excited to get started with my car, these forums have inspired me.

ActRightSB

Yeah. It's time for you to switch tire shops. 20x9 wheel with 245/35 tires and no plans on lowering it. They will very easily fit. But guys on here will tell you that you'll have the 4x4 look if you don't lower it with 20"s. It's all about how you like your ride.

Rock0007

Thanks I knew they would fit just fine because I have been researching here on acurazine for a while.

I'm having a hard time picturing how it will sit with stock susspension. The overall diameter of the tire and wheel wouldnt change thus the gap will be the same. Those Niche wheels will be 1" wider than stock and the Offset is +35 where stock is +55 I believe. Will the Wheels stick out beyond the fender?

Heban83

1.Brand of Rim - Rovos Durbin
2.Rim size (diameter and width) -20x8.5
3.Offset +35
4.Brand of tire -Toyo Proxes 4 plus
5.Tire size -245/35/20 All around
6.Drop Type and Amount -oem
7.Do they rub -No
8. Transmission type -Auto
9 Picture- http://i1270.photobucket.com/albums/...ps95196083.jpg

Brock79

Some wheel shops will only allow for so much when they sell a set of wheels. This leaves them with no obligation or should I say lawsuit free if something were to go wrong.

TJ Zooker

1.Brand of Rim - Braelin BR02
2.Rim size (diameter and width) - 20x8.5
3.Offset +35
4.Brand of tire - Falken 453
5.Tire size -255/35/20 All around
6.Drop Type and Amount - TEIN SA
7.Do they rub - On big dips
8. Transmission type -Auto

DrewQ35

1.Brand of Rim - Niche Milan
2.Rim size (diameter and width) - 20x10
3.Offset - +40
4.Brand of tire - Michelin Pilot Sport
5.Tire size - 255/35/20
6.Drop Type and Amount - Teins Super Street
7.Do they rub - Only on big dips
8. Transmission type - Auto

cltgt

Awesome look!

HeartTLs

iTrader: (5)

Can a mod sticky this thread, or at least say they're not going to?

carbonTSEX

Same thing with the " Post your TL right now thread". Please!

si1point6

1.Brand of Rim - TSW Nurburgring
2.Rim size - 19 x 9.5 squared
3.Offset - 41
4.Brand of tire - Continental ExtremeContact DW
5.Tire size - 265/35/19
6.Drop Type and Amount - Tein SS with EDFC
7.Do they rub - No, but rolled fenders just in case
8. Transmission type - Manual
9. Picture -

KarKraze

^^Very nice .

HeartTLs

iTrader: (5)

Agreed! What center caps you have on there, they don't look like TSW? How do you like the DW's!? Do you have experience with other summer tires for reference?

si1point6

The center caps you see are from my 18" OEM wheels. Although they fit the opening in the TSW wheels, the plastic tabs on the back of the Acura center caps did not grab the back of the hub opening very well, and they would fall out. So, I used a heat gun to soften up the plastic tabs and bent them outwards.

The DWs are great! Very grippy, but it may also be due to the wider tread from going from 245's to 265's. I've had the DWS previously in 245/45/18's. The were good tires, but I could feel the car getting a little squirrely on hard turns. The DW's I have now feel like they have stiffer sidewalls, but it also could be because of the shorter sidewall from going from stock 18's to the TSW 19's.

HeartTLs

iTrader: (5)

Nice, stock centers look much better than TSWs. Your car is on point. Blacked out side molding looks great on BWP and not color matching the entire front and leaving some chrome also looks great. I'm so jelly about you guys not running front plates NY laws.

lift3d_

My thoughts exactly, that blacked out trim looks so damn good on BWP! Nicely done!

wreak

What exhaust are you using si1point6? Car looks great.