A spec wheels need opinions
The following users liked this post:
mattcl-s (10-14-2016)
#3
Banned
Thread Starter
#5
Banned
Thread Starter
#7
Banned
Thread Starter
got them mounted a re-balanced not sure if they are 18x8 or the 18x8.5 ill have to take them off this week to look. tires are potenza re760 sports but they're almost bald. wheels have some curb rash but im taking them to get powder coated at the end of the month and get the rash fixed that will be about 450$.
Trending Topics
The following users liked this post:
mattcl-s (10-18-2016)
#12
Senior Moderator
there's a lip so it's 18x8. 200 is a pretty good deal considering!
#13
Banned
Thread Starter
this might sound like a dumb question but, would having really bad tires cause the car to pull to one side during acceleration and stopping? checked the psi one side is only not far off from the other.
#15
Banned
Thread Starter
#20
Banned
Thread Starter
the color will kinda of look like tl type s wheels. yeah when I put the tires on I was not paying attention to the tread ware so two of the tires were more worn down then the others and I had them mixed up with the front and backs that what gave it the vibrations
The following users liked this post:
justnspace (11-08-2016)
The following users liked this post:
justnspace (11-08-2016)
#24
Former Sponsor
iTrader: (1)
Did you custom finish them? Black tends to be super sleeper because in lower light levels like evening, the wheels basically disappear. Maybe a matte Graphite metallic will be stealthy enough and still show off the design?
And the wheels you have are most likely 8" wide only, because the 8.5" width was darker and the tire profile looks kinda bulgy as opposed to stretch on the 8.5".
And the wheels you have are most likely 8" wide only, because the 8.5" width was darker and the tire profile looks kinda bulgy as opposed to stretch on the 8.5".
#25
Banned
Thread Starter
Did you custom finish them? Black tends to be super sleeper because in lower light levels like evening, the wheels basically disappear. Maybe a matte Graphite metallic will be stealthy enough and still show off the design?
And the wheels you have are most likely 8" wide only, because the 8.5" width was darker and the tire profile looks kinda bulgy as opposed to stretch on the 8.5".
And the wheels you have are most likely 8" wide only, because the 8.5" width was darker and the tire profile looks kinda bulgy as opposed to stretch on the 8.5".
#26
'03 ABP YA4-S 6MT
Join Date: Mar 2007
Location: Edmonton, AB
Age: 38
Posts: 1,192
Likes: 0
Received 18 Likes
on
18 Posts
wish you posted here i would have taken them for sure!
found a local member that got them for $400 when they were being cleared out..now he's trying to sell them in very rough shape for $700...
found a local member that got them for $400 when they were being cleared out..now he's trying to sell them in very rough shape for $700...
#27
Banned
Thread Starter
I think I know the ones you're talking about have black plasti dip on them and look really dirty off a TL? oh well my car is forming rust and the back wheel wells tried to prevent it from getting worse but it wa coming from in inside somehow its a common problem in MN seen other acura with the rust in the same spot it tough to buy a nice set of wheels whens there is rust ya know
#28
Former Sponsor
iTrader: (1)
I actually sold the wheels. between fixing curb rash on all 4 which were not in the best shape, powder coat, and new rubber it was more money than I was looking to spend plus I was heading on a snowboarding vacation and thought I could use then money there instead but I do I have my eyes open for another set when they pop up one that will be in better shape
Thread
Thread Starter
Forum
Replies
Last Post
DRock2018
3G TL Tires, Wheels & Suspension
12
10-13-2016 07:41 PM
GK83
Car Parts for Sale
1
06-10-2016 01:40 AM
LucasG90
3G TL Tires, Wheels & Suspension
33
04-08-2016 11:44 PM