Category: Accessories
Price: $1
Private or Vendor Listing: Private Listing
Part Fits (you may select multiples): CL 2G, TL 2G
Location (State/Prov/Terr): NY
Item Condition: Used

Okay so no one can afford the entire car and I don't blame them. I'll be parting out the car in two stages. Located in Nyc. Will deliver parts up to 100 miles.

Stage1: All parts (performance & oem) are for sale except for transmission and transmission related parts.

Stage2: Transmission + all transmission parts + whatever is left in the car is yours for a low price of $2500. Yup, $2500, if no one buy's the bbks... it's yours.. free. If no one buys the emanage, you get it... FREE. You will get a clean title, a motor that works (but is not in best condition) but you have to find a way to get it off my driveway and onto yours. (We can work something out)

Stage 2 will occur when I feel I've made a decent amount of money from parts. So here we go, transmission parts include:

Clutchmasters FX300 Kit w/ Lightweight Flywheel
-shifts perfect, new honda fluid in there (really smooth)
-clutch has less than 1 year, 3000 miles on it.
-flywheel has 1 1/2 years on it.
Richiev6 Magic Module
Corsports shifter bushings
All linkage,hydralic lines,pedals,cupholder,cluster (full swap, you wont need anything else)

Stage1 Partout (Big items are local only, locals take priority & dibs doesn't mean anything to me... cash is king and money talks) All items do not include shipping, you will pay ACTUAL shipping... I will pay for packaging materials.

Pics and Video of supercharger/emanage/spacers
http://www.flickr.com/photos/30141179@N06/
Everything is still in the car so, pm with requests.

CT supercharger with hbp & custom intake with dirty injen filter.
-$2000 local only (Comes with new 51r battery & (6) new ik22s)

Rc 440 Injectors
-$300+ship

Greddy Emanage Blue with boomslang harness for auto ecu
-$300 +ship

CT Headers
-$750 +ship

Tanabe Catback with Vibrant Ultra Quiet Resonator welded on
-$450 local, all flanges are welded on together up to the cat.
-exhaust clip in supercharger video posted above.

RT Cat (Like... 200 miles on it)
-$200 +ship (comes with o2 defoulers)

Outlaw IM Spacers (intake manifold & tb)
-$50 +ship

Eibach F/R Sways
-$200 local

Tein Basic Coilovers
-$650 local

Rotora 4piston BBK (Rotors are almost done)
-$200 local (Use these to get discounts for the new rotora bbks)

Acura Aspec Wheels (purchased with curb rash)
-$600 local w/ tires

Acura Oem Rear plastic trunk liner
-$50 local

Acura Oem lipkit
-OEM front (needs paint)
-fiberglass rear/sides
-$150 local

Oem bumpers
-$50 local, each, front/rear


All other things not listed such as trunk,doors,interior... etc.
Just pm me, I really don't want much for the entire car.

Entertaining offers for volks, works, rpfs or any forged wheel in 17-18 x minimum of 8, maxmium of 9.5

 

Local here. i'll take the tanabbe and trunk liner. possible to see the condition first?
thanks

 

I need several odds and ends. What color is the interior? How much for the whole car?

 

Whole car's $6900, drive it home.
However, I'm going to break it apart soon, so decide quick!

 

Interior is black

 

Happen to have the engine to cabin wire harnesses and the underhood fuse box for the 6mt?

 

Sorry to hear you're parting. What's the mileage on the injectors?

 

@freeaTLast, I used rv6 module so I didn't need those parts
@MoneyPit, 3000-5000 miles (uncertain, about 1 year usage)

 

Okay, so a few people are asking me for help.

For the supercharger, I can help you install that no problem...

However, the trans swap is way too time consuming for me so I had a shop give me a quote. The trans swap from my car to your car will be between $650-$1000, if it cost over $1000. I will pay the remainder of it. Shop is located in Brooklyn, Ny.

If you guys wanna make it easy for me, Give me an additional $750 with the trans and receive:

CT headers still on the car
RT cat still on the car
tein coilovers still on the car
Eibach swaybar still on the car
moog endlinks still on the car

 

how much for moog endlinks? shipped to 95127

 

@02TL4ATL, might be selling the endlinks with the tranny setup since I hate working under the car.

 

Pics on BBK I can meet u half way in jersey or something

 

Do you have the cls6 shift boot assembly? Or any shift boot? Can I buy it?

 

Confirm that you want the BBKs with nearly dead rotors with no hope of replacement and I'll take pics tomorrow.

 

Not parting with any of the trans swap yet.
A few people want to buy it whole.

 

RC440 Fuel Injectors Sold to MoneyPit

CT supercharger with hbp & custom intake with dirty injen filter.
-$2000 local only (Comes with new 51r battery & (6) new ik22s)

Greddy Emanage Blue with boomslang harness for auto ecu
-$300 +ship

CT Headers
-$750 +ship

Tanabe Catback with Vibrant Ultra Quiet Resonator welded on
-$450 local, all flanges are welded on together up to the cat.
-exhaust clip in supercharger video posted above.

RT Cat (Like... 200 miles on it)
-$200 +ship (comes with o2 defoulers)

Outlaw IM Spacers (intake manifold & tb)
-$50 +ship

Eibach F/R Sways
-$200 local

Tein Basic Coilovers
-$650 local

Rotora 4piston BBK (Rotors are almost done)
-$200 local (Use these to get discounts for the new rotora bbks)

Acura Aspec Wheels (purchased with curb rash)
-$600 local w/ tires

Acura Oem Rear plastic trunk liner
-$50 local

Acura Oem lipkit
-OEM front (needs paint)
-fiberglass rear/sides
-$150 local

Oem bumpers
-$50 local, each, front/rear

 

would the sway bars fit a 3rd gen tl-s??

 

would the spacers fit 99 tl not type s and can you post pics of sways thanks

 

how's the fitment on the fiberglass sides and rear kit? any pics?

 

@SL1K3, I'm not sure if it'll fit 3rd gen, prolly not.

@dc2kid, Accord to this, http://www.outlawengineering.com/hondajframe.html, they fit.
No shipping on sways.

@MKSHFT, there's a pic in the link provided on the first post. They need a small amount of bondo to fit flush.

 

is the RT cat from XLR8? I know he recently came out with a new version that was 2.5" in and out.

 

 

Mine isn't the XLR8 version, sorry.

 

still have those skirts? tol you ill take them u said u have people interested thou ?

 

If you're local, come get them.

 

sent pm, let me know when i can come pick up my car

 

Still awaiting pic of bbk

 

Sorry, there's snow right now. I'll take a pic right now in the shitty weather, and a better pic tomorrow.

 

nah dont worry about taking the pic...

 

^that guy can't wait to tow my car away.
Too bad! I'll have it for at least another week.

 

how much would it be shipped to canada h9h2v1 for the spacers

 

@dc2kid, I think shipping is $13 via usps

 

I'm interested in front sway bar i can meet you half way where are you located ?

How come you ran 8psi do you have custom pulley ? What size?

 

@StreetKA, comptech sells an 8 psi alternator pulley.

Swaybars are pending with tranny sale.

 

Can you measure that pulley for me ? I think that what i have too.

 

I'll get you a pic of it later today. I plan on giving it to whoever buys the kit just so you know.

 

@StreetKA, pic's up. diameter is roughly 3.5"

 

PENDING
6 Speed Swap w/ car
CT Headers
Rotora BBK
Tein Basic
Eibach sways w/ moog endlinks
Oem Bumpers w/ lipkit

Deal of the week!
Tanabe exhaust w/ all flanges welded together $300
Pick up after sunday, must put deposit down before Saturday.

If no one buys the exhaust, it's going into the dumpster.

 

Lmk if the kid doesn't pic the car up Just txt me

 

@Rush, I told him to sell it to you if he doesn't want it. He just doesn't have any other brakes to put on the car.