bay area fender rolling
Trending Topics
#8
i got it done at exact. pretty much anywhere that advertises fender rolling can be trusted, its really easy to do. just call them and ask if they use a heatgun. if they hesitate to answer, they dont know what theyre doing. MAKE SURE THEY USE ONE
#9
Lots of JDM parts on my
Join Date: Mar 2001
Location: San Jose fo' life!!!!
Age: 50
Posts: 2,351
Likes: 0
Received 4 Likes
on
4 Posts
I do have a roller, but don't like to do them. For other peoples car that is. It's more of a personal tool now. You can also get a dremel and cut the fender. Also check craigslist for a rental.
Most of the rubbing is probably coming from the rear bumper tab.
Most of the rubbing is probably coming from the rear bumper tab.
#11
immauser I found a guy in San Francisco off the Bimmerfourm that does fender rolling. He quoted me $150 to do all 4 fenders on My 06 TL
Name = Charbel Elian
Email = charbel_elian@hotmail.com
Phone = Charbel 650-274-6665
Name = Charbel Elian
Email = charbel_elian@hotmail.com
Phone = Charbel 650-274-6665
#12
el bolo loco
immauser I found a guy in San Francisco off the Bimmerfourm that does fender rolling. He quoted me $150 to do all 4 fenders on My 06 TL
Name = Charbel Elian
Email = charbel_elian@hotmail.com
Phone = Charbel 650-274-6665
Name = Charbel Elian
Email = charbel_elian@hotmail.com
Phone = Charbel 650-274-6665
#13
immauser I found a guy in San Francisco off the Bimmerfourm that does fender rolling. He quoted me $150 to do all 4 fenders on My 06 TL
Name = Charbel Elian
Email = charbel_elian@hotmail.com
Phone = Charbel 650-274-6665
Name = Charbel Elian
Email = charbel_elian@hotmail.com
Phone = Charbel 650-274-6665
wdp415, post pics when you're done!
#14
Hi guys, this is Charbel.
Here are the pictures from today's fender roll.
http://picasaweb.google.com/AvusBlauS50/FenderRoll#
Let me know if you have any questions, my contact info is in one the earlier posts.
Here are the pictures from today's fender roll.
http://picasaweb.google.com/AvusBlauS50/FenderRoll#
Let me know if you have any questions, my contact info is in one the earlier posts.
#19
Pro
iTrader: (1)
My friend and I rolled our fenders the other day with a couple of progressively thicker wooden dowels and finished it off with an inch and a half PVC pipe. All bought at the Home Depot. Used a heat gun to get the fender warm to the touch and just rolled it by driving the car forward and backward. Turned out great and no paint chippage. Total cost, not more then $10.
#20
#25
WEAKSAUCE !!!
Fender Work
Hey WDP415,
Does he know how to pull as well and does a smooth job where it pretty much look'd stock? No Paint Chip, Damage, Peeling and fender damaged...
Do you have pictures of his work?
Does he know how to pull as well and does a smooth job where it pretty much look'd stock? No Paint Chip, Damage, Peeling and fender damaged...
Do you have pictures of his work?
#26
WEAKSAUCE !!!
Thanks
nevermind I see this post now haha my bad...
Hi guys, this is Charbel.
Here are the pictures from today's fender roll.
http://picasaweb.google.com/AvusBlauS50/FenderRoll#
Let me know if you have any questions, my contact info is in one the earlier posts.
Here are the pictures from today's fender roll.
http://picasaweb.google.com/AvusBlauS50/FenderRoll#
Let me know if you have any questions, my contact info is in one the earlier posts.
#31
Racer
Remember to eat before because all they really have within a walking distance is a Quiznos and some taqueria. Did a pretty good job, no cracking of the paint on the fender or anything
Thread
Thread Starter
Forum
Replies
Last Post
mlody
5G TLX (2015-2020)
85
12-04-2019 02:11 PM
DerrickW
3G TL Performance Parts & Modifications
9
11-15-2015 05:52 PM
ExcelerateRep
Sponsored Sales & Group Buys
0
09-22-2015 10:39 AM