Wheels, Finally
#42
Burning Brakes
Thread Starter
Rather than totally building my running boards I'm modifying a set off the '18 R. First get rid of the red line and add radius to match underbody spoilers
#43
Racer
#44
Burning Brakes
Thread Starter
It's the factory 10th gen 2018 CTR skirts. They are slightly shorter but will work with modification, lots of modification planned. In the end they will be wrapped with 3m carbon look vinyl that matches the under body spoilers.
#46
Burning Brakes
Thread Starter
Got the epoxy and planning to mill open a 1/2" copper tube so I can use it to make the radius at the outside edge. The radius will match the underbody spoilers better.
#47
Burning Brakes
Thread Starter
The go to whoa ratio is adequate. City driven and the brakes it has is more than enough to get me rear ended.
I've had an EVO 8 and I did the full TRD on my '11 xb and city driving them is hard on them, having to rebed them is a PIA, if you don't track.
I've had an EVO 8 and I did the full TRD on my '11 xb and city driving them is hard on them, having to rebed them is a PIA, if you don't track.
#48
Burning Brakes
Thread Starter
Got the square O rings so I could finish the exhaust tips. I'm pretty happy with the outcome.
The following users liked this post:
silverTL6 (05-24-2022)
#52
Burning Brakes
Thread Starter
The following users liked this post:
David Jordi Coronel (12-06-2018)
The following users liked this post:
DaIll1 (12-09-2018)
#55
Burning Brakes
Thread Starter
The following users liked this post:
David Jordi Coronel (12-08-2018)
#56
#57
#58
Burning Brakes
Thread Starter
The problem is, it needs reflectors on the back corners and those work so well.
I'm one of those guys that never tints/paints lights. If I don't like the design, I don't buy.
I actually have the tips angled to fit the body lines, trying to make it look optioned rather than custom.
#59
Burning Brakes
Thread Starter
#60
Burning Brakes
Thread Starter
I've been playing a bit and thought I'd post some process shots.
Making digital mirrors using backup cameras. One pair (switched) looking at the front wheels, one pair facing back. I will also put one (still in housing) up front and center (wanna see curbs when parking).
Part of the camera housing will be LED turn flashers. I just hope my idea of aero doesn't make horrible noise at speed.
After I get the aiming correct I'll start shaping.
I'm using this https://www.homedepot.com/p/Project-...-PP1/203553730
then coating it with this https://www.homedepot.com/p/3M-Bondo...-272/202077784
Making digital mirrors using backup cameras. One pair (switched) looking at the front wheels, one pair facing back. I will also put one (still in housing) up front and center (wanna see curbs when parking).
Part of the camera housing will be LED turn flashers. I just hope my idea of aero doesn't make horrible noise at speed.
After I get the aiming correct I'll start shaping.
I'm using this https://www.homedepot.com/p/Project-...-PP1/203553730
then coating it with this https://www.homedepot.com/p/3M-Bondo...-272/202077784
#61
Burning Brakes
Thread Starter
Been too lazy to heat the garage to work on projects, but I did some spring cleaning.
#63
Burning Brakes
Thread Starter
#64
Hope you dont mind I posted some of your exhaust pics on our ILX FB page. Come check it out. Lots of ILX owners now at over 1,500 members.
https://www.facebook.com/groups/255284411252403/
https://www.facebook.com/groups/255284411252403/
The following users liked this post:
DaIll1 (05-03-2019)
#65
Burning Brakes
Thread Starter
Hope you dont mind I posted some of your exhaust pics on our ILX FB page. Come check it out. Lots of ILX owners now at over 1,500 members.
https://www.facebook.com/groups/255284411252403/
https://www.facebook.com/groups/255284411252403/
I'm not and won't be a member of FB. They want to know too much. and sell your info
The following users liked this post:
mrdale (02-22-2022)
#66
Burning Brakes
Thread Starter
Quick cellphone pic before the rain. Had some satin black wrap done.
The following users liked this post:
mrdale (02-22-2022)
#67
Burning Brakes
Thread Starter
I took some snaps today and thought I'd share.
I'm really liking the satin black 3M vinyl look. I hope the satin doesn't polish with machine washing.
I'm really liking the satin black 3M vinyl look. I hope the satin doesn't polish with machine washing.
The following users liked this post:
mrdale (02-22-2022)
The following users liked this post:
DaIll1 (05-03-2019)
#69
Burning Brakes
Thread Starter
When it's in quiet mode it's quieter than stock. I tried recording it while driving but the wind noise is louder, even with the foam ball on the mike (or mic if you prefer). Next week I'll have to get out of town and lay my phone at the side of the street to record a drive by.
#70
Burning Brakes
Thread Starter
I suck at this. Too much wind and tire noise in the drive by.
I was able to sorta record some revs. Phone on ground 3 feet behind.
edit: first, valve closed then valve open.
I was able to sorta record some revs. Phone on ground 3 feet behind.
edit: first, valve closed then valve open.
Last edited by DaIll1; 04-29-2019 at 06:43 PM.
The following users liked this post:
DaIll1 (05-03-2019)
#72
Burning Brakes
Thread Starter
Even with the valve open leaving 2.5" straight thru, that 30" really quiets it down.
She whispers thru this
#73
Burning Brakes
Thread Starter
The exhaust sound is exactly what I was aiming for, that's why I made the chamber cross over instead of a 'Y'. Using reflective and low pressure wave sound modification. If you quit learning, death is soon.
Now that the weather is more conducive, I'm playing again. Didn't like doubling the electric bill, and warming the neighbors.
Feeding the liner,
to make this
Half round to add the radius to match the A-Spec under spoilers.
Now that the weather is more conducive, I'm playing again. Didn't like doubling the electric bill, and warming the neighbors.
Feeding the liner,
to make this
Half round to add the radius to match the A-Spec under spoilers.
#74
Burning Brakes
Thread Starter
Still needs fitting (half round lying on skirt)
The following users liked this post:
DaIll1 (05-03-2019)
The following users liked this post:
DaIll1 (05-03-2019)
#77
Burning Brakes
Thread Starter
Made fixture to match radii hight and extended R skirt to fit.
Last edited by DaIll1; 06-06-2019 at 04:23 PM. Reason: not everything made the transfer
#78
Burning Brakes
Thread Starter
Cut the Civic mounting off and starting the fitting WooHoo
The following users liked this post:
visi_d (06-12-2019)
#79
Burning Brakes
Thread Starter
That looks like the spot.
#80
Burning Brakes
Thread Starter
Got this in the mail
guess what's coming
I'll get it all painted before attachment.
edit:painted BWP
guess what's coming
I'll get it all painted before attachment.
edit:painted BWP
Last edited by DaIll1; 06-15-2019 at 06:41 PM.