so over the last few months i have been having intermittent issues with my stove not igniting... i would here the electric start click but the burner would not light... so i would have to use matches....

but sporadically, it would work just fine and then sometimes not...

just now, i tried to use the stove and no clicks from the electric start at all... i checked power to the electric start and current is good 120v... does anyone know how i can check to see if the spark module is bad?

 

ordered a new spark module... i tested the lines going into the module after the knobs and still reading 120v, however with neutral into the module, and knob turned on, voltage drop to 98v... if i jump the module with full 120v, nothing happened...

i guess ill be using matches the next few days...