Scott - frustrated
03-06-2014, 03:39 PM
#1
1st Gear
Thread Starter
Join Date: Mar 2014
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Scott - frustrated
Hi everybody ! This is my first thread so be gentle. I have a code up on my 98' CL. It is P0706 Trans Range Sensor. Anyone know what it is and any recommendations on how to fix it ? The CL has about 170,000 on it but still runs great.
03-06-2014, 03:41 PM
#2
Senior Moderator
Join Date: May 2003
Location: Better Neighborhood, Arizona
Posts: 45,634
Received 2,328 Likes
on
1,308 Posts
Hi Scott and welcome.
I'm moving this to the 1st generation CL forum, you'll get some answers there!
I'm moving this to the 1st generation CL forum, you'll get some answers there!
The following users liked this post:
97BlackAckCL (03-10-2014)
03-07-2014, 03:25 PM
#3
P0706 Acura - Open In Transmission Range Switch Circuit
Possible causes
When is the code detected?
Possible symptoms
P0706 Acura Description
Possible causes
- Faulty Park/neutral position switch
- Misadjusted park/neutral position switch
- Park/neutral position switch harness is open or shorted
- Park/neutral position switch circuit poor electrical connection
When is the code detected?
- The transmission range switch detects the selector lever position and sends a signal to the TCM
Possible symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P0706 Acura Description
- The park/neutral position (PNP) switch includes a transmission range switch. The transmission range switch detects the selector lever position when the shift lever is in the N or P shift position and sends a signal to the Transmission Control Module (TCM).
Thread
Thread Starter
Forum
Replies
Last Post
snorf
2G RDX (2013-2018)
429
11-04-2019 06:44 AM
ostrich
5G TLX (2015-2020)
7
09-11-2015 04:28 PM
