turn signal relay resistor mod,solution for hyper flashing after LED install
#1
Instructor
Thread Starter
turn signal relay resistor mod,solution for hyper flashing after LED install
Anyone else needs this mod done you can PM me, cost is minimal and takes less then 10 minutes. Location brampton.
The following users liked this post:
story.customz (09-12-2013)
#4
Instructor
Thread Starter
No I don't got the resistors, u have to order them online or go to a1 electronic like abrieluno said. I can't confirm what resistor u need tho, I only can go off what I've seen. Abrieluno used a .24ohms resistor in his 07 and works fine, but tried the same mod with the same resistor for an 05 tl and having some issues.i only have front turn signal ledz and using a. 12 ohms resistor with no issues. Whenever u get the resistors PM me.
Trending Topics
The following users liked this post:
story.customz (09-12-2013)
The following users liked this post:
pearl905 (09-17-2013)
#11
Instructor
Thread Starter
#12
Pro
Shoot i forgot that you had some I remember you telling us that like couple months ago. I've order some just waiting to do the modification
#25
Instructor
The following users liked this post:
TegoTL (10-03-2013)
#33
Chapter Leader (Eastern Canada)
#36
Race Director
iTrader: (8)
LED turn signals are pointless if you still have the stock amber diffuser
Last edited by guitarplayer16; 10-09-2013 at 10:52 PM.
The following users liked this post:
abrieluno (10-09-2013)
#37
Chapter Leader (Eastern Canada)
Like what GP16 said, there is no point of you having LED turn signals if you have that huge amber plastic over the turn signals unless you have your Headlights cleared out
#39
shifting at 7k
iTrader: (4)
Pearl's guy is legit! Real cool guy, went to his house at like 11pm just brought him the module and he did it on-spot in 10 minutes. He charges $20 for the labour which is awesome and a much better alternative than going to buy regular resistors and wiring them up in the trunk or front. It's a lot more work and money that way.
The module comes out very easy, it's located under the driver's side dash right above the fuse box. It will be a black case with "Honda ABS" written on it, just pull it right out takes 2 minutes.
Also big thanks to brianch for hooking me up with those resistors. He does some great detailing work too!
The module comes out very easy, it's located under the driver's side dash right above the fuse box. It will be a black case with "Honda ABS" written on it, just pull it right out takes 2 minutes.
Also big thanks to brianch for hooking me up with those resistors. He does some great detailing work too!