Clubs Montreal / Quebec province
08-18-2009, 08:05 AM
#91
Instructor
08-18-2009, 01:10 PM
#95
Instructor
j\k i'll try to cleam myn too. finaly i'm going to see your car.
514 467 8894
08-18-2009, 06:14 PM
#100
Rev High; Drive Happy
iTrader: (2)
Join Date: Feb 2008
Location: Scarborough, Ontario
Age: 34
Posts: 4,076
Received 398 Likes
on
332 Posts
I also do not have a piston compressor thing...
I'd come in my van but it stopped running. Engine won't start for some reason.
08-19-2009, 06:57 AM
#101
Advanced
Join Date: Jan 2007
Location: Montreal,Canada
Age: 49
Posts: 69
Received 0 Likes
on
0 Posts
I'm back
Hey guys, nice to see some TL's fans. I was out the scene for a while cause of work. Now i'm back. Last season i got my self a set of wheels, springs and a lot more toys that i didn't have time to put on my ride.
I have a lot of friend who got Tl's and i'm pretty sure they would like to joind the meets.
Keep me posted
TL FO LIFE
I have a lot of friend who got Tl's and i'm pretty sure they would like to joind the meets.
Keep me posted
TL FO LIFE
08-19-2009, 09:31 AM
#102
Instructor
Yesterday 4 car showed up, Thx guys for comming
4 Black Tl's
mastini when is the next meet ?
post some of your pics too.
4 Black Tl's
mastini when is the next meet ?
post some of your pics too.
Last edited by lankanboy1; 08-19-2009 at 09:33 AM.
08-19-2009, 10:10 PM
#109
Instructor
so what do you guys say next tuesday @ 6:30 or 7:00 pm
1) mastini
2) LanKanBoy1 x2
3) VmtSquad
4) BMarley
5) ???
Last edited by lankanboy1; 08-19-2009 at 10:12 PM.
08-19-2009, 10:43 PM
#110
Racer
Join Date: Feb 2007
Location: Montreal. Quebec. Canada
Age: 36
Posts: 491
Likes: 0
Received 4 Likes
on
4 Posts
hehe guys. My car is in the body shop for a while still. o4Komodo saw the car when we met to give him the brake parts, the paintjob was done... but it just came out of the paint booth and its needs detailing. So im not leaving until the paint is absolutly perfect..
Anyways, o4Komodo. U can buy the caliper compressor tool (i think yours has to be pushed and screwed in at the same time) at canadian tire. Its a small cube with different pin arrangements on each side. And there is a tool that the cube clips on. For the caliper bolts, put some Zep44 (or liquid wrench or any penetrating oil) 2-3 hours before working on it. It should help, and then use a 1/2 inch rachet to take it off, the best would be a braker bar, if u have one.
O, and o4Komodo. U ow me a drink or smthing for those 3.50$ u didn't pay me :P
Anyways, o4Komodo. U can buy the caliper compressor tool (i think yours has to be pushed and screwed in at the same time) at canadian tire. Its a small cube with different pin arrangements on each side. And there is a tool that the cube clips on. For the caliper bolts, put some Zep44 (or liquid wrench or any penetrating oil) 2-3 hours before working on it. It should help, and then use a 1/2 inch rachet to take it off, the best would be a braker bar, if u have one.
O, and o4Komodo. U ow me a drink or smthing for those 3.50$ u didn't pay me :P
08-20-2009, 05:36 AM
#112
Rev High; Drive Happy
iTrader: (2)
Join Date: Feb 2008
Location: Scarborough, Ontario
Age: 34
Posts: 4,076
Received 398 Likes
on
332 Posts
hehe guys. My car is in the body shop for a while still. o4Komodo saw the car when we met to give him the brake parts, the paintjob was done... but it just came out of the paint booth and its needs detailing. So im not leaving until the paint is absolutly perfect..
Anyways, o4Komodo. U can buy the caliper compressor tool (i think yours has to be pushed and screwed in at the same time) at canadian tire. Its a small cube with different pin arrangements on each side. And there is a tool that the cube clips on. For the caliper bolts, put some Zep44 (or liquid wrench or any penetrating oil) 2-3 hours before working on it. It should help, and then use a 1/2 inch rachet to take it off, the best would be a braker bar, if u have one.
O, and o4Komodo. U ow me a drink or smthing for those 3.50$ u didn't pay me :P
Anyways, o4Komodo. U can buy the caliper compressor tool (i think yours has to be pushed and screwed in at the same time) at canadian tire. Its a small cube with different pin arrangements on each side. And there is a tool that the cube clips on. For the caliper bolts, put some Zep44 (or liquid wrench or any penetrating oil) 2-3 hours before working on it. It should help, and then use a 1/2 inch rachet to take it off, the best would be a braker bar, if u have one.
O, and o4Komodo. U ow me a drink or smthing for those 3.50$ u didn't pay me :P
Your car looked good, minus the flaws on the paint by the skirts.
Also, no worries =p
Next time we meet I'll get you a nice cold drink---or beer. Whichever you prefer.
08-20-2009, 09:09 AM
#114
Instructor
Join Date: Nov 2008
Location: Montreal
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
sorry guys i couldnt make it, i'll let you guys know for next tuesday.
the only thing is i got my car not too long ago, so its stock. plus might wanna upgrade to a newer model.
the only thing is i got my car not too long ago, so its stock. plus might wanna upgrade to a newer model.
08-20-2009, 11:48 PM
#115
Advanced
Join Date: Dec 2005
Location: Montreal
Age: 44
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
08-21-2009, 06:51 PM
#118
Rev High; Drive Happy
iTrader: (2)
Join Date: Feb 2008
Location: Scarborough, Ontario
Age: 34
Posts: 4,076
Received 398 Likes
on
332 Posts
I don't know french either...
But who's paying attention to the movies when there's a girl next to you who also does not understand...? ;]