Tyler's Owdi B5 S4 Build & Update(s) Thread
#242
Turd Polisher
Thread Starter
iTrader: (1)
Seriously
And no, I'm not buying those wheels just to spite you!
You know my price bruh
:gheyhug:
And no, I'm not buying those wheels just to spite you!
You know my price bruh
:gheyhug:
#243
Team Owner
you sure you turned your gas cap 21.5 times? that could cause CEL
The following users liked this post:
TylerT (06-22-2016)
#244
Turd Polisher
Thread Starter
iTrader: (1)
I think you're right, car runs fine
#245
Advanced
That's such a beautiful blue OP. But on the note of the cel, have you refilled lately? My car would throw cels over gas all the time and when i put the exhaust and HFC it just made it worse. I did find a fix for the HFC having a permanent code though
The following users liked this post:
TylerT (06-22-2016)
#246
Turd Polisher
Thread Starter
iTrader: (1)
Thanks broham! As I've said earlier in this thread, it was Nogaro or bust. I love how it pops in the sunlight.
And yeah, I haven't filled it for probably 2 1/2 weeks. I'm running a stock cat & a Comptech catback ... but I'm starting to think it's the primary O2 sensor because the secondary has already been replaced
Either way, running codes this afternoon. I'm sure it's minor.
And yeah, I haven't filled it for probably 2 1/2 weeks. I'm running a stock cat & a Comptech catback ... but I'm starting to think it's the primary O2 sensor because the secondary has already been replaced
Either way, running codes this afternoon. I'm sure it's minor.
#247
Team Owner
Is the primary a wideband O2 sensor? If so, make sure you have lube available for when you go to buy it.
#248
Moderator
iTrader: (3)
I'm sure he has plenty of lube.
#249
Ex-OEM King
I'm guessing primary means pre-cat O2.
#251
Ex-OEM King
#253
Ex-OEM King
#254
Turd Polisher
Thread Starter
iTrader: (1)
Speaking of being poor AF.
I cannot wait for the next wave of mods ... I'm thinking high flow cats (Maybe no cats .. just to stick it to the man), full 3" exhaust all the way back, and most importantly a Stage 2 tune.
Based on what the interwebs told me, it should be around 300whp / 350wtq ..
I cannot wait for the next wave of mods ... I'm thinking high flow cats (Maybe no cats .. just to stick it to the man), full 3" exhaust all the way back, and most importantly a Stage 2 tune.
Based on what the interwebs told me, it should be around 300whp / 350wtq ..
The following 2 users liked this post by rockstar143:
Marcelechka (06-23-2016),
TylerT (06-22-2016)
#256
Turd Polisher
Thread Starter
iTrader: (1)
While I agree further familiarizing myself with the car is a good idea, Stage 2 (300whp) is not a crazy expectation for the 2.7T itself. Forged internals ... just gotta make sure the tune has good timing / AFR
Don't worry J, I got this
Don't worry J, I got this
The following users liked this post:
rockstar143 (06-22-2016)
#257
Senior Moderator
Originally Posted by rockstar143
Keep it reliable...
slow the fuck down on your mods. Get to know your car before you start changing so much that you won't know what the problem is when you run into one.
slow the fuck down on your mods. Get to know your car before you start changing so much that you won't know what the problem is when you run into one.
The following users liked this post:
rockstar143 (06-22-2016)
The following users liked this post:
TylerT (06-22-2016)
#260
Turd Polisher
Thread Starter
iTrader: (1)
Really though, you do offer sound advice and that's why I love ya. :gheyhug:
The following users liked this post:
rockstar143 (06-23-2016)
#261
Turd Polisher
Thread Starter
iTrader: (1)
Nailed it, I had 2 codes.
P1456 Evap Fuel System Leak (gas cap )
P0420 Catalyst System Efficiency Below Threshold (Bank 1) - I replaced the cat with a used OEM unit roughly 6 months ago.. maybe the material already shifted and busted my secondary O2 sensor?
Either way, not super critical ... I cleared the codes and will see if they come back. If so, the S is going on stands this weekend
P1456 Evap Fuel System Leak (gas cap )
P0420 Catalyst System Efficiency Below Threshold (Bank 1) - I replaced the cat with a used OEM unit roughly 6 months ago.. maybe the material already shifted and busted my secondary O2 sensor?
Either way, not super critical ... I cleared the codes and will see if they come back. If so, the S is going on stands this weekend
#262
Team Owner
why you need code readers when you got me I do diagnostic work over air
But not a bad time to replace it with a HFC
But not a bad time to replace it with a HFC
The following users liked this post:
TylerT (06-23-2016)
#264
Rawr.
Dude... get the OEM wheels.
At 300/350, you should be good pretty content as that is PLENTY of power to get you from point A to B.
Although I don't disapprove of the boost gauge, we all agree your funds are better spent else where... i.e OEM wheels & flapping headliner fabric!
At 300/350, you should be good pretty content as that is PLENTY of power to get you from point A to B.
Although I don't disapprove of the boost gauge, we all agree your funds are better spent else where... i.e OEM wheels & flapping headliner fabric!
The following users liked this post:
TylerT (06-23-2016)
#265
Senior Moderator
It's your fucking blinker fluid...
Dude... get the OEM wheels.
At 300/350, you should be good pretty content as that is PLENTY of power to get you from point A to B.
Although I don't disapprove of the boost gauge, we all agree your funds are better spent else where... i.e OEM wheels & flapping headliner fabric!
At 300/350, you should be good pretty content as that is PLENTY of power to get you from point A to B.
Although I don't disapprove of the boost gauge, we all agree your funds are better spent else where... i.e OEM wheels & flapping headliner fabric!
#266
Turd Polisher
Thread Starter
iTrader: (1)
If only there was a way of making the OEM wheels wider ... 7.5" is just plain sad.
Mods, can you please update the thread title to: "Tyler's Owdi B5 S4 Build & Update(s) Thread"
Thanks!
Mods, can you please update the thread title to: "Tyler's Owdi B5 S4 Build & Update(s) Thread"
Thanks!
#267
Team Owner
Whoa, my bad!! I thought he was talking about the S4.. if that was the case, I'd imagine a FI car to have a wideband sensor. Actually, the NC Miata, in stock form, has a wideband too. The more you know!
#268
Team Owner
I can't believe how pretty much everyone is in agreement on the oem wheels, lol.
#269
Senior Moderator
Except Tyler himself
but give it time.. peer pressure is an excellent motivator
but give it time.. peer pressure is an excellent motivator
#270
Turd Polisher
Thread Starter
iTrader: (1)
I feel like JS+BRZ when he was CONSTANTLY hassled (ahem, ttribe) to lower his car
#272
Senior Moderator
for all!!!
#273
Ex-OEM King
The following users liked this post:
TylerT (06-23-2016)
#274
Turd Polisher
Thread Starter
iTrader: (1)
I'm actually meeting up with him on Sunday afternoon, doing a drive through Iddywild with my local car club and meeting him in Fontana afterwards
A professional photoshoot will follow! Probably in 2 weeks time.
A professional photoshoot will follow! Probably in 2 weeks time.
#275
Senior Moderator
Title updated as requested!
#276
Turd Polisher
Thread Starter
iTrader: (1)
Thanks Yummy!
Sorry for being picky, but could you remove the quotation mark before my name? Thanks much.
Sorry for being picky, but could you remove the quotation mark before my name? Thanks much.
#278
Turd Polisher
Thread Starter
iTrader: (1)
Mod of the century right here!
Thank you.
Thank you.
#280
Turd Polisher
Thread Starter
iTrader: (1)
I already have an OEM wheel though, the full sized spare