Tyler's Owdi B5 S4 Build & Update(s) Thread
#1521
Turd Polisher
Thread Starter
iTrader: (1)
#1522
Moderator
iTrader: (1)
Cliff notes:
- first car at 17 (97 2.2CL)
- "build" motor for car aka slap h22 head on f22 block (G22)..motor goes boom one block from home, pistons melted
- F20B swap CL few years down the road, get it street tuned, revving to 8k. Start hearing rattling noises. End up limping home in 1st gear for probably 15 miles. Flywheel bolts backed out and there were literally only 2 bolts still holding it in place. Ended up mangling the threads on the crank so I drilled out the threads and helicoiled it with the motor in the car.. .. then loctite the shit out of the new bolts ... still holding strong to this day..
I could go on but those were 2 memorable moments, get a good laugh every time I think about it. I could almost tear up thinking about it. Could of abandoned the car game which I was encouraged to by pretty much everyone but you could say I'm determined AF & here we are today. The next chapter is gonna be something to look back on, that's for sure.
- first car at 17 (97 2.2CL)
- "build" motor for car aka slap h22 head on f22 block (G22)..motor goes boom one block from home, pistons melted
- F20B swap CL few years down the road, get it street tuned, revving to 8k. Start hearing rattling noises. End up limping home in 1st gear for probably 15 miles. Flywheel bolts backed out and there were literally only 2 bolts still holding it in place. Ended up mangling the threads on the crank so I drilled out the threads and helicoiled it with the motor in the car.. .. then loctite the shit out of the new bolts ... still holding strong to this day..
I could go on but those were 2 memorable moments, get a good laugh every time I think about it. I could almost tear up thinking about it. Could of abandoned the car game which I was encouraged to by pretty much everyone but you could say I'm determined AF & here we are today. The next chapter is gonna be something to look back on, that's for sure.
The following 2 users liked this post by teh CL:
rockstar143 (12-22-2017),
TylerT (12-22-2017)
#1523
Turd Polisher
Thread Starter
iTrader: (1)
Cliff notes:
- first car at 17 (97 2.2CL)
- "build" motor for car aka slap h22 head on f22 block (G22)..motor goes boom one block from home, pistons melted
- F20B swap CL few years down the road, get it street tuned, revving to 8k. Start hearing rattling noises. End up limping home in 1st gear for probably 15 miles. Flywheel bolts backed out and there were literally only 2 bolts still holding it in place. Ended up mangling the threads on the crank so I drilled out the threads and helicoiled it with the motor in the car.. .. then loctite the shit out of the new bolts ... still holding strong to this day..
I could go on but those were 2 memorable moments, get a good laugh every time I think about it. I could almost tear up thinking about it. Could of abandoned the car game which I was encouraged to by pretty much everyone but you could say I'm determined AF & here we are today. The next chapter is gonna be something to look back on, that's for sure.
- first car at 17 (97 2.2CL)
- "build" motor for car aka slap h22 head on f22 block (G22)..motor goes boom one block from home, pistons melted
- F20B swap CL few years down the road, get it street tuned, revving to 8k. Start hearing rattling noises. End up limping home in 1st gear for probably 15 miles. Flywheel bolts backed out and there were literally only 2 bolts still holding it in place. Ended up mangling the threads on the crank so I drilled out the threads and helicoiled it with the motor in the car.. .. then loctite the shit out of the new bolts ... still holding strong to this day..
I could go on but those were 2 memorable moments, get a good laugh every time I think about it. I could almost tear up thinking about it. Could of abandoned the car game which I was encouraged to by pretty much everyone but you could say I'm determined AF & here we are today. The next chapter is gonna be something to look back on, that's for sure.
The incorrectly installed rear main seal & botched clutch install kinda hurt my pride a bit - to my credit, the rear main seal on the B5 S4 is an absolute bitch to do ... most say if it's not leaking, don't replace it or it'll potentially leak. Mine was leaking for some time and I had no choice.
The clutch issues to me is a total fluke. I have a hunch it's the pilot bearing, but there's really no telling until it's apart.
The following users liked this post:
teh CL (12-22-2017)
#1524
Team Owner
It may hurt your pride, but you just doubled down on your man card, pulling that sucka apart again
#1525
Turd Polisher
Thread Starter
iTrader: (1)
If you gunna be dumb, you gotta be tough.
#1526
Moderator
iTrader: (1)
If you don't want your pride hurt, get away from the car game, start running..
Cars will literally gut you emotionally, physically & financially but with that said, nothing is better than that first start after a swap or any kind of work for that matter. It's literally what keeps me going.
Cars will literally gut you emotionally, physically & financially but with that said, nothing is better than that first start after a swap or any kind of work for that matter. It's literally what keeps me going.
#1527
Team Owner
Hey... you are becoming an expert in repairing S4 in record breaking time..... as miserable as you are feeling now, you are winning!
#1528
Turd Polisher
Thread Starter
iTrader: (1)
Thanks for the encouraging words guys, much appreciated.
The following users liked this post:
teh CL (12-22-2017)
The following users liked this post:
teh CL (12-22-2017)
#1530
Turd Polisher
Thread Starter
iTrader: (1)
I know you - if you had the time, you'd be a master tech.
The following users liked this post:
rockstar143 (12-22-2017)
#1534
Turd Polisher
Thread Starter
iTrader: (1)
:gheyhug:
#1537
Senior Moderator
#1538
Team Owner
^LOL for a second, i actually thought that was what i said... because it does sound right
#1539
Team Owner
I wasn't kidding about the man card thing. I'm ready for you to propose to me. I'll do anything.
The following users liked this post:
TylerT (12-22-2017)
#1540
Team Owner
It's sad how on an Acura devoted forum, I have to go into the audi thread to see a good build
The following users liked this post:
TylerT (12-22-2017)
#1541
Turd Polisher
Thread Starter
iTrader: (1)
I do occasionally check into the 3G section to see the FI / NA builds .. 4G / 5G are just plain sad.
#1542
Team Owner
There is some 3G stuff coming back again, but it seems in general, most guys are cheaping out with whatever they do with that car. I can't blame them. Likely doesn't make much sense to put 5000 dollar wheels on a car worth 9000.
#1543
Turd Polisher
Thread Starter
iTrader: (1)
Finally up and running after 5 weeks.
As some of you know, I was experiencing some clutch issues and it turned out to be the pilot bearing install. To insure 0 issues, I decided to order a brand new LUK OEM dual mass flywheel and start fresh like I should have done from the start.
After all of this, I would say this is probably the best "version" of my build so far, I did the following:
Re-did all of my wastegate lines w/ 3/16" fuel line hoses & new clamps
Bought new 2.25" to 2" high temperature silicon couplers for the turbos & inlets, also added heatwrap to the areas where it gets toasty:
FX400 clutch disk & pressure plate were good.
I also re-adjusted & pressure tested my wastegate cracking pressure from 14psi to 12psi. Boost is much more predictable now with less compressor surge.
Motor went back in on Sunday and also added my new Wagner sidemounts.
Beautiful thing about these sidemounts? Uses all of my OEM intercooler hoses and didn't have to trim my bumper or core support.
The ER / SRM / RS4 intercoolers require new hoses, core support trimming, etc.
We were delayed 2-3 hours towards the end because we couldn't figure out a simple ground issue
Live and learn, she's back:
I've driven it about 75 miles since last night and everything looks solid .. battery is a little tired but otherwise behaving normally.
I need to perform a boost leak test to make sure everything is snug, but otherwise I should finally be taking steps forward rather than 3 back
Started to get excited about finishing this project ... it's been a long journey.
As some of you know, I was experiencing some clutch issues and it turned out to be the pilot bearing install. To insure 0 issues, I decided to order a brand new LUK OEM dual mass flywheel and start fresh like I should have done from the start.
After all of this, I would say this is probably the best "version" of my build so far, I did the following:
Re-did all of my wastegate lines w/ 3/16" fuel line hoses & new clamps
Bought new 2.25" to 2" high temperature silicon couplers for the turbos & inlets, also added heatwrap to the areas where it gets toasty:
FX400 clutch disk & pressure plate were good.
I also re-adjusted & pressure tested my wastegate cracking pressure from 14psi to 12psi. Boost is much more predictable now with less compressor surge.
Motor went back in on Sunday and also added my new Wagner sidemounts.
Beautiful thing about these sidemounts? Uses all of my OEM intercooler hoses and didn't have to trim my bumper or core support.
The ER / SRM / RS4 intercoolers require new hoses, core support trimming, etc.
We were delayed 2-3 hours towards the end because we couldn't figure out a simple ground issue
Live and learn, she's back:
I've driven it about 75 miles since last night and everything looks solid .. battery is a little tired but otherwise behaving normally.
I need to perform a boost leak test to make sure everything is snug, but otherwise I should finally be taking steps forward rather than 3 back
Started to get excited about finishing this project ... it's been a long journey.
The following 9 users liked this post by TylerT:
1killercls (02-02-2018),
CCColtsicehockey (02-08-2018),
jangkai (02-19-2018),
Predatorbird (02-03-2018),
rockstar143 (02-02-2018),
and 4 others liked this post.
#1545
Team Owner
Why is your custom plate for the car, hanging on your wall? Did you go with something else?
The following users liked this post:
TylerT (02-02-2018)
#1550
Senior Moderator
front plate brahs
#1551
Turd Polisher
Thread Starter
iTrader: (1)
My goal tomorrow is getting it welded up tomorrow
From there, my wideband gauge can be put into the secondary o2 slot ..
Bingo.
#1552
Team Owner
Damn those gold plated wrap looks hella cool.
#1558
Team Owner
#1560
In the Mid-South meow
iTrader: (2)
You're getting good at this engine in, engine out, engine back in routine aren't ya?! Nice work man!