some audio gear i'm putting in my car...56 k (nga plz)
#1
Senior Moderator
Thread Starter
some audio gear i'm putting in my car...56 k (nga plz)
i've had this stuff lying around my garage. it came out of my old maxima. i've been fighting the urge to install it but now i think i will. the tub is hinged at the front, so i can get to the spare etc. you can see the hinge pins at each corner.
this equipment is no joke. thats a pheonix gold ms 2125 on the right, the monster on the left is an ms 2250. i'll be using a pair of kicker solobaric s15d for my subs.
MS2125 SPECIFICATIONS:
Into 4 ohms @ 12.5/14.4 VDC
125/160 WRMS x 2
Into 2 ohms @ 14.4 VDC
255 WRMS x 2
Bridged into 4 ohms @ 14.4 VDC
510 WRMS x 1
MS2250 SPECIFICATIONS:
Stable to 4 ohms bridged OR 2 ohm stereo
Into 4 ohms @ 12.5/14.4 VDC
250/340 WRMS x 2
Into 2 ohms @ 14.4 VDC
520 WRMS x 2
Bridged into 4 ohms @ 14.4 VDC
1050 WRMS x 1
so i'll be running ~ 1550 watts of rms power. unregulated power supply. i'll be drawing enough current to weld, literally.
with the cover off you can see the two amps with their 3/4" beveled and polished plexiglass cover. above teh amps is an EQ 215x 30 band eq, along w/ an AX 204 18db per octave crossover and a bass cube.
for my front stage i have a pair of 6.5" mb quarts. and a pair of $700 eton 1" tweeters.
now i just need to figure out a head unit to use. probably go w/ an alpine. something w/ 5 volts output.
what do you guys think? questions a comments welcome.
this equipment is no joke. thats a pheonix gold ms 2125 on the right, the monster on the left is an ms 2250. i'll be using a pair of kicker solobaric s15d for my subs.
MS2125 SPECIFICATIONS:
Into 4 ohms @ 12.5/14.4 VDC
125/160 WRMS x 2
Into 2 ohms @ 14.4 VDC
255 WRMS x 2
Bridged into 4 ohms @ 14.4 VDC
510 WRMS x 1
MS2250 SPECIFICATIONS:
Stable to 4 ohms bridged OR 2 ohm stereo
Into 4 ohms @ 12.5/14.4 VDC
250/340 WRMS x 2
Into 2 ohms @ 14.4 VDC
520 WRMS x 2
Bridged into 4 ohms @ 14.4 VDC
1050 WRMS x 1
so i'll be running ~ 1550 watts of rms power. unregulated power supply. i'll be drawing enough current to weld, literally.
with the cover off you can see the two amps with their 3/4" beveled and polished plexiglass cover. above teh amps is an EQ 215x 30 band eq, along w/ an AX 204 18db per octave crossover and a bass cube.
for my front stage i have a pair of 6.5" mb quarts. and a pair of $700 eton 1" tweeters.
now i just need to figure out a head unit to use. probably go w/ an alpine. something w/ 5 volts output.
what do you guys think? questions a comments welcome.
#4
Senior Moderator
Thread Starter
everything will unbolt and unplug in minutes, for track days.
but this time i'll need help lifting the stuff out.
but this time i'll need help lifting the stuff out.
#6
Senior Moderator
Thread Starter
i have 3 of those right now.
you could say i have a phoenix gold collection.
you could say i have a phoenix gold collection.
Trending Topics
#9
Senior Moderator
Thread Starter
maybe i'll throw these in too, so my headlights don't dim.
Thread
Thread Starter
Forum
Replies
Last Post
rockyboy
2G RDX (2013-2018)
171
08-04-2024 10:35 AM
JarrettLauderdale
2G CL Dynograph Gallery
5
09-21-2015 07:51 PM
Mike Bertram
2G TL (1999-2003)
9
09-10-2015 09:27 AM