Shawn S

OK guys, here is what you have been asking for.
I hope I’m not breaking any rules by posting these scans from the HELM manual.

Click on the thumbnail once to open the small photo.
Once this is displayed, click on it again for the full (1200 x 1650) scan.

Schematics

Shawn S


------------------
>>> 400+ posts on h/a.net <<< >>> 550+ posts “freak” on the “old” acura-cl.com <<<

2001 CL Type S - NAV - San Marino RED / Parchment - Spoiler - 35% Tint - Roof Visor - PIAA Lamps
GOLD Emblems & Grill - V1 w/remote - KICKER ZR-360 w/(2) 10" Alumapro Subs - Shine by ZAINO
For Pictures see: PAGE 1 PAGE 2 PAGE 3 PAGE 4 V1 & SUBS

soopa

Dont understand any of it... but I wanna keep this post up top so everyone with some brains sees it.

------------------
2001 Acura 3.2 CL Type-S
San Marino Red (Navigation)
PIAA 19173 Ion Yellow Fog Lights
Aftermarket Black Wood Trim Kit

CL SLeePeR

It's a wiring diagram of the cl's audio setup. Shows the grounds and some of the current (current=amps) value that pass threw it's components. ITT taught me a little.

scalbert

Standard electrical printed, notice the resistor banks and switches in the steering wheel controls (page 22-144).

BTW, I was looking at some of the other prints today and noticed that a CT (current transformer) is used with an output to the PCM. The PCM has typically monitored voltage levels, but now it is monitoring current and can determine total system load.