Changing wheels with the factory jack and hand tools sucks!!!!
Thread Starter
Fuct in the hed!
Joined: Sep 2001
Posts: 14,057
Likes: 4
From: Chicagoland-ish
Changing wheels with the factory jack and hand tools sucks!!!!
Changing wheels with the factory jack and hand tools sucks!!!! I have one side on...now I'm taking a break...
I'll do the other side in about 15 minutes, then take some pics!
I'll do the other side in about 15 minutes, then take some pics!
Go Giants
Joined: Aug 2004
Posts: 70,003
Likes: 1,260
From: PA
Originally Posted by Nicky Pass
Changing wheels with the factory jack and hand tools sucks!!!! I have one side on...now I'm taking a break...
I'll do the other side in about 15 minutes, then take some pics!
I'll do the other side in about 15 minutes, then take some pics!
Trending Topics
Thread Starter
Fuct in the hed!
Joined: Sep 2001
Posts: 14,057
Likes: 4
From: Chicagoland-ish
All finsihed...I'll get the pics up in a little while. U cant use a regular floor jack on the factory locations....you'll bend the pinch seam, you have to go staight up and down (American quality!). So its either a lift or the hard way...and I'm retardedly impatient, so I did it the hard way. AND... I have a cold, but I toughed through it!
teh Senior Instigator
Joined: Sep 2000
Posts: 44,094
Likes: 980
From: Huntington Beach, CA -> Ashburn, VA -> Raleigh, NC -> Walnut Creek, CA
Originally Posted by Crazy Sellout
My jack has slits. 
what jack is this?
Nicky, there should be some mounting points further in on the body that will allow you to use a floor jack.
Thread Starter
Fuct in the hed!
Joined: Sep 2001
Posts: 14,057
Likes: 4
From: Chicagoland-ish
Originally Posted by CLpower
what jack is this?
Nicky, there should be some mounting points further in on the body that will allow you to use a floor jack.
Nicky, there should be some mounting points further in on the body that will allow you to use a floor jack.
There is, my floor jack couldn't get there, I'd have to drive on to an incled just to get the friggin' jack under the K-memeber (front) and there is a bar on the IRS you can use for the rear.
....It sucked with the factory jack, but I'm all done!
When I go home I'll post the pics...It need to be lowered about an inch, then it will look perfect!
Agean Blue Bishes
Joined: Aug 2004
Posts: 1,754
Likes: 1
From: Toms River, NJ
shoulda got steeda wheels. my friend has them on his cobra with 275s in the front and 315's or something in the rear.
looks sharp.
and i know how you feel with no air tools, i put new springs on my car on friday with out air tools and im still sore as hell.
looks sharp.
and i know how you feel with no air tools, i put new springs on my car on friday with out air tools and im still sore as hell.
on to the next one...
Joined: May 2004
Posts: 4,872
Likes: 0
From: Mpls. MN
I like the look, subtle, but different.
May I suggest some eyecatchers for your calipers?
https://acurazine.com/forums/showthread.php?t=335025
May I suggest some eyecatchers for your calipers?
https://acurazine.com/forums/showthread.php?t=335025
Thread Starter
Fuct in the hed!
Joined: Sep 2001
Posts: 14,057
Likes: 4
From: Chicagoland-ish
Originally Posted by SSMTL01
Looks pretty good for the stock look
I was gonna get some 24s with blue LED valve cover caps and spinners, but I wanted to go for "subtle"!
Originally Posted by Crazy Sellout
I like the rear stance... but i still like the stock wheels better.
Doesnt' look bad, but I personally wouldn't spend money on rims that looked so much like stock.... but if you like it... that's all that matters
Thread Starter
Fuct in the hed!
Joined: Sep 2001
Posts: 14,057
Likes: 4
From: Chicagoland-ish
Originally Posted by bgsm1th
BTW...I'm going to Vegas next week, perhaps you could suggest a place where I could find a nice "sweet". 
Bitch.
Bitch.
Thread
Thread Starter
Forum
Replies
Last Post
mada51589
3G TL Problems & Fixes
80
Jan 9, 2025 04:40 PM
justin7779
2G TL Problems & Fixes
8
Dec 25, 2015 10:33 PM
asahrts
Member Cars for Sale
0
Sep 4, 2015 05:55 PM