P2R Power Plenums
#1
P2R Power Plenums
Bought these used directly from P2R, from another V6 site. Tried to use them on my J30/J35 I/M and head swap. I was unable to use them due to their size and could not make them fit. So, I just swapped on a set of OEM plenums and have these up for sale.
They have been mounted on the I/M, some Permatex copper spray is still on the mounting face. They have very little assembly and handling scuffs. But as you can see inside and outside on the plenums, they are very clean.
I Paid $400 shipped, I am asking the same - $400 shipped US only.
Payment via Paypal. There is no dibs on this sale.
![](https://acurazine.com/forums/picture.php?albumid=4312&pictureid=22446)
![](https://acurazine.com/forums/picture.php?albumid=4312&pictureid=22447)
![](https://acurazine.com/forums/picture.php?albumid=4312&pictureid=22452)
![](https://acurazine.com/forums/picture.php?albumid=4312&pictureid=22450)
![](https://acurazine.com/forums/picture.php?albumid=4312&pictureid=22448)
Minor Scuff
They have been mounted on the I/M, some Permatex copper spray is still on the mounting face. They have very little assembly and handling scuffs. But as you can see inside and outside on the plenums, they are very clean.
I Paid $400 shipped, I am asking the same - $400 shipped US only.
Payment via Paypal. There is no dibs on this sale.
Minor Scuff
![WHEEELMAN is offline](https://acurazine.com/forums/images/maestro/statusicon/user_offline.gif)
#3
J36Twingt28r's,nextgt30r
so what car do you have wheelman? i might be interested will this fit 7th gen accord v6? i have hood spacers on my car, with the mdx spacer so i think top clearance shouldn't be a problem. let me know, tell me if this will fit or not. plus what do u mean it won't fit? like there isnt enough space, so if there was enough space this would fit?
![tenzingsherpa is offline](https://acurazine.com/forums/images/maestro/statusicon/user_offline.gif)
#6
I have a 01 Accord w/ the J30A1 low end. The J35 top end has been swapped. I had a fellow member over on do the swap for me while along with having my Timing Belt/Water pump replaced.
I have no idea if these will fit a 7th Gen I/M....isn't your 7th Gen I/M plenums cast as one piece into the manifold?
These are for a 03 CL-S intake manifold, but I don't have all the applications for these. I'm guessing all the 2nd gen CL and TL's with the J32 I/M?
The P2R plenums are bigger than the OEM plenums. When we tried to install the I/M on top of the Lower Runners, the P2R plenums hit the Valve covers and would no allow the I/M to be lowered onto the runners. We came up short about 1 inch. So, I had to switch to the smaller OEM plenums to allow the I/M to mount up to the runners.
Now, if your Cl or Tl has enough hood clearance, you could run the OEM I/M Spacer and probably use these, I'm not sure. Our Accords just don't have the hood clearance for my type of modification/upgrade.
I have no idea if these will fit a 7th Gen I/M....isn't your 7th Gen I/M plenums cast as one piece into the manifold?
These are for a 03 CL-S intake manifold, but I don't have all the applications for these. I'm guessing all the 2nd gen CL and TL's with the J32 I/M?
The P2R plenums are bigger than the OEM plenums. When we tried to install the I/M on top of the Lower Runners, the P2R plenums hit the Valve covers and would no allow the I/M to be lowered onto the runners. We came up short about 1 inch. So, I had to switch to the smaller OEM plenums to allow the I/M to mount up to the runners.
Now, if your Cl or Tl has enough hood clearance, you could run the OEM I/M Spacer and probably use these, I'm not sure. Our Accords just don't have the hood clearance for my type of modification/upgrade.
![WHEEELMAN is offline](https://acurazine.com/forums/images/maestro/statusicon/user_offline.gif)
Trending Topics
#8
J36Twingt28r's,nextgt30r
will the 03 cls intake manifold fit the 7th gen accord?? i wanna put the 09 tls-awd intake manifold on my 7th gen and need to know if the 01-03 cls intake manifold will fit.
![tenzingsherpa is offline](https://acurazine.com/forums/images/maestro/statusicon/user_offline.gif)
#9
10th Gear
Join Date: Jan 2006
Location: Orange County
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
pm sent
![wickedpr1nce is offline](https://acurazine.com/forums/images/maestro/statusicon/user_offline.gif)
#10
Intermediate
iTrader: (4)
Join Date: May 2006
Location: Dothan, AL
Age: 44
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
These are for a 03 CL-S intake manifold, but I don't have all the applications for these. I'm guessing all the 2nd gen CL and TL's with the J32 I/M?
^^^ That's what I wanted to hear!! I want these....
^^^ That's what I wanted to hear!! I want these....
![Kramer1 is offline](https://acurazine.com/forums/images/maestro/statusicon/user_offline.gif)
#11
lowrd on tein CS biatch
iTrader: (2)
YES YOU ARE CORRECT.... all j32a2 motors (type s) in a 2nd gen CL or TL. this will work for. with a typs s manifold ofcourse... i dunno if it works on a premium
It makes the car pull more overall.... 12tq and 8hp is the gains...
after doing a fair chunk of looking... more if u pnp but it's not my style... I just like to bolt on pwr and not have shyt go wrong
It makes the car pull more overall.... 12tq and 8hp is the gains...
after doing a fair chunk of looking... more if u pnp but it's not my style... I just like to bolt on pwr and not have shyt go wrong
Last edited by CL-S progression 01; 11-09-2009 at 05:29 PM.
![CL-S progression 01 is offline](https://acurazine.com/forums/images/maestro/statusicon/user_offline.gif)
Thread
Thread Starter
Forum
Replies
Last Post
rp_guy
Member Cars for Sale
9
07-16-2017 07:33 AM