FS: KoniYellow +GC, 235/40/18 tires
09-27-2012, 04:49 PM
#1
KoniYellow +GC, 235/40/18 tires
Category: Steering & Suspension
Price: $680
Private or Vendor Listing: Private Listing
Location (State/Prov/Terr): CA
Item Condition: Used
One shock is out, bad luck I assume...
These were only used for commuting to from work and school
880,680,580,101, 5, etc etc I avoid bumps and potholes if possible so the other 3 should still have a lot of life
750obo brand new both combined over 900 or 1k. Open to reasonable offers considering one shock is going out. (The one in the picture with the oil stains.)
I believe these are the Koni with 5 perches of adjustment as well
These are for the Accords of the same generation as the 3g TL bolted right up to mine
235/40/18 Nankang tires 85 obo All 4 still have A LOT of life and are all worn evenly
both fronts look the same
both rears look the same**Tires pending decision: I may need to put these back on because my current 255 tires are too fucking wide and my camber is all ugly to clear the quarter panel fenders...
I also have full metal m4 airsoft rifle for 160obo upgraded internals
2 hi-cap mags
AK full metal 90obo
1 hi cap mag
Pics available upon request as I think most will not care for these
Last edited by DC2many; 09-27-2012 at 04:52 PM.
10-02-2012, 03:40 PM
#4
My apologies I have not been on in a week, few updates I'd like to address that I did not put in the OP
- I would perfer Norcal bay area meet ups
- I want to sell the suspensions as a complete package unless offer for an individual piece is very well reasonable and acceptable. Usually packaged items after selling off a piece of the combo do not sell well, I do not know about this case but I'll perhaps consider it.
- @ azn, yes each sorry about op
@ quanaman I'm pending on tires, I have not gotten around to see how I'll deal with my overly wide 255's yet ( Too many things getting in way of schedule and I may need to put the 235s back on if I can't get rid of this stupid camber and clear the fenders at the same time. )
- I would perfer Norcal bay area meet ups
- I want to sell the suspensions as a complete package unless offer for an individual piece is very well reasonable and acceptable. Usually packaged items after selling off a piece of the combo do not sell well, I do not know about this case but I'll perhaps consider it.
- @ azn, yes each sorry about op
@ quanaman I'm pending on tires, I have not gotten around to see how I'll deal with my overly wide 255's yet ( Too many things getting in way of schedule and I may need to put the 235s back on if I can't get rid of this stupid camber and clear the fenders at the same time. )
Last edited by DC2many; 10-02-2012 at 03:46 PM.
10-23-2012, 01:46 PM
#7
^ Tires don't require to be packed? interesting to know, in that case I'll let you know by this Sunday night or Monday as a local wants to look at them within the week.
bump for suspensions need them gone, one is blown others are quite mint and have a lot of life. Give me a reasonable offer, very negotiable. These are the 5 perch adjustable not 2 or 3 or none at all perches
http://www.autoanything.com/suspensi...A5576A0A0.aspx
http://www.horsepowerfreaks.com/part...oilovers//1027
here are some ball park figures for those wanting for comparisons, also not sure if anyone on here is selling the 5 perch
I will be posting it on the accord forums as well later this week 4000$ in debt is fucking shit holes
bump for suspensions need them gone, one is blown others are quite mint and have a lot of life. Give me a reasonable offer, very negotiable. These are the 5 perch adjustable not 2 or 3 or none at all perches
http://www.autoanything.com/suspensi...A5576A0A0.aspx
http://www.horsepowerfreaks.com/part...oilovers//1027
here are some ball park figures for those wanting for comparisons, also not sure if anyone on here is selling the 5 perch
I will be posting it on the accord forums as well later this week 4000$ in debt is fucking shit holes
Trending Topics
12-19-2012, 02:53 PM
#15
I'd rather sell them all at once, it'll be relatively impossible to sell broken up sets
shit, people getting stuff for the holidays and I'm stuck w/ no job and no means to pay debt
shit, people getting stuff for the holidays and I'm stuck w/ no job and no means to pay debt
12-19-2012, 10:18 PM
#19
255/35/18 tire pics will be up this within the next 7 days. They arn't with me
surely no pictures are required for nankang ultra sport 2 with less than 300~ miles driven on them. They'll probably look exactly like brand new pictured except without that "shine or glimmer" of a 0 mile tire
surely no pictures are required for nankang ultra sport 2 with less than 300~ miles driven on them. They'll probably look exactly like brand new pictured except without that "shine or glimmer" of a 0 mile tire
01-01-2013, 12:58 AM
#21
nankang ultra sport ns2 255/35/18 tire pics will be up sometime. 105ea obo
surely no pictures are required for nankang ultra sport 2 with less than 300~ miles driven on them. They'll probably look exactly like brand new pictured except without that "shine or glimmer" of a 0 mile tire
2 Bridgestone potenza 960 pole position pretty good tread and evenly worn for both tires. They are 230~ each brand new. 2 for 200obo
Also the 235/40/18 are also nankang ultra sport ns2, I did not specify which one in that post.
surely no pictures are required for nankang ultra sport 2 with less than 300~ miles driven on them. They'll probably look exactly like brand new pictured except without that "shine or glimmer" of a 0 mile tire
2 Bridgestone potenza 960 pole position pretty good tread and evenly worn for both tires. They are 230~ each brand new. 2 for 200obo
Also the 235/40/18 are also nankang ultra sport ns2, I did not specify which one in that post.
Last edited by DC2many; 01-01-2013 at 01:03 AM.
02-02-2013, 02:12 AM
#28
235/40/18 tires sold, Thank you Wong05Tsx
everything else is still up for sale, if you would like to inquire for detail or pictures please send a pm.
Local bay area residents preferred please.
Added:
ATLP V2 Jpipe + custom 2.5 test pipe w/ my oem heatshields on it or trade for xlr8 v2
380obo
bought with minor outer tearing on flex pipe and no change since that point. Actual flex pipe is still good and intact.
no dents that I recall at the moment.
My want for keeping it weigh heavily, testing waters
everything else is still up for sale, if you would like to inquire for detail or pictures please send a pm.
Local bay area residents preferred please.
Added:
ATLP V2 Jpipe + custom 2.5 test pipe w/ my oem heatshields on it or trade for xlr8 v2
380obo
bought with minor outer tearing on flex pipe and no change since that point. Actual flex pipe is still good and intact.
no dents that I recall at the moment.
My want for keeping it weigh heavily, testing waters
Last edited by DC2many; 02-02-2013 at 02:20 AM.
03-01-2013, 12:06 PM
#29
the mint nankang pics to persuade some buyers
220obo seems fair, you're paying for an almost direct weld/bolt on. You'll use new or existing hangers.
Y pipe is still mint
vibrant ultra quiet resonator prices are going up on these lol. minor scratches underneath but should not affect anything as it is outer casing
hXttp://www.amazon.com/Vibrant-1141-...nt+ultra+quiet
get rid of the X if you want to use link
my old piping for sale 2.5" piping to vibrant ultra quiet resonator to 2.5 with 2.25" Y split to 2.25 pipes
Ready to go on anyone's TL all is needed is to supply your own tips!
the T pipe was put in place for drone range shift but you can extend it for better reduction or chop it off.
04-19-2013, 03:52 PM
#32
mega update
nankang 255/35/18 tires
mint 110 ea all under 500 miles of extremely light driving to prevent rubbage due to them not fitting AT ALL at the time
catback w/ no exhaust tips for 3rd gen Acura TL
220obo
should be direct fit to any 3rd gen TL (possibly accords or tsx??)
consist of 2.5" piping to 2.5" vibrant ultra quiet resonator (light scratches on underpart of casing) to 2.5" to 2.25" Y split
supply your own exhaust tips (or lack of) and hangers
*-=NEW UPDATE=-*
AP2 S2000 exhaust very good condition with oem oval tip 200obo
AP1 s2000 rear section with 2 mufflers no tips. Perfect for those wanting the OEM TWIN LOOP design/function application to their own car or any car, supply your own tips or maybe run none. 120obo
Extreme Dimensions (condition will be listed below in notes) front bumper, sideskirts, rear bumper for toyota 1G matrix (buddy of mine molded/covered the 2 sides and made a center cut out) some lady hit his car on the side before the sideskirts were even put on. The kit goes for ~400$
Notes:
Front bumper - extremely good condition, no cracks, scratches etc
Sideskirts - Mint unpainted, unopened from packaging
Rear bumper - extremely good condition, also no cracks but some scratches on paint. The original exhaust cut out was molded in and a cutout was made in the center
*important* You would need to trim or mod your oem metal bumpers and/or support brackets, my friend still has his so you don't need to do it to your own if you decide to pick this kit up**
feel free to throw offers
nankang 255/35/18 tiresmint 110 ea all under 500 miles of extremely light driving to prevent rubbage due to them not fitting AT ALL at the time
catback w/ no exhaust tips for 3rd gen Acura TL220obo
should be direct fit to any 3rd gen TL (possibly accords or tsx??)
consist of 2.5" piping to 2.5" vibrant ultra quiet resonator (light scratches on underpart of casing) to 2.5" to 2.25" Y split
supply your own exhaust tips (or lack of) and hangers
*-=NEW UPDATE=-*
AP2 S2000 exhaust very good condition with oem oval tip 200obo
AP1 s2000 rear section with 2 mufflers no tips. Perfect for those wanting the OEM TWIN LOOP design/function application to their own car or any car, supply your own tips or maybe run none. 120obo
Extreme Dimensions (condition will be listed below in notes) front bumper, sideskirts, rear bumper for toyota 1G matrix (buddy of mine molded/covered the 2 sides and made a center cut out) some lady hit his car on the side before the sideskirts were even put on. The kit goes for ~400$
Notes:
Front bumper - extremely good condition, no cracks, scratches etc
Sideskirts - Mint unpainted, unopened from packaging
Rear bumper - extremely good condition, also no cracks but some scratches on paint. The original exhaust cut out was molded in and a cutout was made in the center
*important* You would need to trim or mod your oem metal bumpers and/or support brackets, my friend still has his so you don't need to do it to your own if you decide to pick this kit up**
feel free to throw offers
Last edited by DC2many; 04-19-2013 at 03:57 PM.
05-30-2013, 04:51 PM
#38
^ don't know the spring rate, previous owner ordered the entire set together.
I'm pending a full sale right now
bump, I know someone wants mint s2k ap2 xhaust and it's MANDREL BENT w/ the oval tips!
and someone wants to just buy the other ones to place it on a ek or some shit? lol
I'm pending a full sale right now
bump, I know someone wants mint s2k ap2 xhaust and it's MANDREL BENT w/ the oval tips!
and someone wants to just buy the other ones to place it on a ek or some shit? lol
