FS: Logonzojls Full Partout~GT35R turbo 7gen/Lots of Parts
#1
Intermediate
Thread Starter
FS: Logonzojls Full Partout~GT35R turbo 7gen/Lots of Parts
Well, i wasn't sure that I was going to get rid of my car but things aren't going to work out for me. If anyone is interested in buying the car complete let me know asap, otherwise pretty much everything on my car is for sale w/the exception of the engine. It's just not too cost effective to sale that. I will accept paypal as long as you add the 3% to the totall cost. shipping will be determined when I go to ship it out.
Little details on the equipment for sale.
High Quality Completely Custom Turbo kit. only has 8k miles on it. Royal Purple synthetic always used, changed every 3k miles or less. GT35r dual floating ball bearing turbo, oil and water cooled. Turbo is capable of making 600hp. Everything included was in perfect working condition when it was hooked up no problems whatsoever. This kit will come with everything you need to hook the turbo up all the way down to the oil pan with the turbo oil return already tapped. There is a lot of custom parts made for this turbo kit and most kits don't come this complete. This setup cost me with all the parts and custom fabricatiion about 10k and its barely been used. I will help answer any questions for installing the kit via email or directly by my cell. Here is a list of whats included. If you have any questions you can call me directly at 631-680-4444 my name is Logan. Please email me for any questions at Logonzojls@yahoo.com with any picture request or other questions. I do have a lot of pictures of the kit on my cardomain site in the last couple of pages. A link to it is attached in my Signature at the bottom.
Garrett GT35r .63ex/.70cmp Turbo w/polished compressor housing
Custom fabricated turbo manifold 03+ Accord/TL 04+
Custom fabricated downpipe w/two 02 bungs welded in.
All ATP oil return/feed fittings and lines for turbo
Custom fabricated Intercooler Piping(black)
AEM Wideband O2 sensor and Guage
Turbo xs BOV RFL
Tial 44mm wastegate w/v-band flanges 4.6psi spring
Precision FMIC
RC 550cc injectors with clips
Custom Intake runners and Fuel rails for the RC injectors
Greddy electronic boost controller profec-b spec-II
Greddy turbo Timer
Denso Iridium Spark Plugs
Green 4" Air filter
Battery relocation wires, hardware and connectors(full kit)
Auto-meter ultralite II Boost Guage (30in Hg-Vac - 15psi Boost)
(2x)Auto-meter carbon fiber single Guage pod
All couplings and V-band's needed, included.
New DEI heat wrap for downpipe
Turbo Manifold and downpipe already completely wrapped with DEI heatwrap.
I will also Include the 3" full exhaust if you want it. It includes (2)Aero-turbine 2540i Mufflers and (1)Aero-turbine resonator It might be expensive to ship but the 3" exhaust is definitely a huge power gain for this setup. At 8psi you should be around 350whp and 325wtq at a bare minimum. I won't be surprised if whoever gets this kit makes over 400whp with 10psi easily.
$6000k FIRM+shiping
Custom Polished Intake manifold for 6spd
Will fit 04+TL/03+AV6
I can paint the top cover any desired color if wanted or just leave it the way it is.
$250.00 shipped w/exchange of your manifold.
Here is a picture for comparison of the Intake manifold
Ingalls Rear Camber kit V6 03+ Accord NEW
Brand new
$130.00 shipped
Custom Carbon Fiber Triple Guage pod(w/o guages)
Paid 1k dollars for this to be made. If fits on the center of the dash and should fit V6 and 4cyl's and its only been used for 7-8 months. this is the high light of my interior and everyone that gets in my car compliments on it.
$550.00+ship
![](http://memimage.cardomain.net/member_images/11/web/683000-683999/683369_182_full.jpg)
![](http://memimage.cardomain.net/member_images/11/web/683000-683999/683369_184_full.jpg)
Tien SS-p Coilovers used for 8k miles perfect shape and condition.
840.00 shipped
Brand new Clutch disc by Comptech. I have this left over from the Comptech Clutch Flywheel combo that I bought. I didn't use this because I bought a stage 3 from Spec.
$160.00 shipped
Auto-meter Guage set(3)Brand new
Ultra-lite II
-Air/Fuel guage-
-oil pressure-
-water temp-
I will try to add some pictures later but they are brand new, perfect condition.
$215.00 shipped
PIAA 998 turbojector projector Fog lights w/hid
I have 3000k mculloch HID kit custom wired. one of the fog lights lense is cracked a little, but barely noticeable and doesn't affect the light. comes with all the neccesary hardware.
$210.00 shipped
![](http://memimage.cardomain.net/member_images/11/web/683000-683999/683369_363_full.jpg)
J35A5 bare block w/o internals Brand New 250.00+shipping
Also willing to trade my body kit for anyone interested in the NYC/Tristate Area. I am just trying to get my car back to stock so I can sell it or trade it in. I might entertain offers to trade my car but it depends on what it is. 77k miles on chasis, brand new all OEM acura 3.5 swap check out my mods list for everything else. engine has around 1k miles on new motor . Car sold as is for 20k, buyer pays all shipping charges. Let me know if you have any more questions.
Logonzojls@yahoo.com
cell:631-680-4444
Logan
BTW, If you need any references I have many on .net, I have been a member there for over 3.5 years. s/n is Logonzojls
Little details on the equipment for sale.
High Quality Completely Custom Turbo kit. only has 8k miles on it. Royal Purple synthetic always used, changed every 3k miles or less. GT35r dual floating ball bearing turbo, oil and water cooled. Turbo is capable of making 600hp. Everything included was in perfect working condition when it was hooked up no problems whatsoever. This kit will come with everything you need to hook the turbo up all the way down to the oil pan with the turbo oil return already tapped. There is a lot of custom parts made for this turbo kit and most kits don't come this complete. This setup cost me with all the parts and custom fabricatiion about 10k and its barely been used. I will help answer any questions for installing the kit via email or directly by my cell. Here is a list of whats included. If you have any questions you can call me directly at 631-680-4444 my name is Logan. Please email me for any questions at Logonzojls@yahoo.com with any picture request or other questions. I do have a lot of pictures of the kit on my cardomain site in the last couple of pages. A link to it is attached in my Signature at the bottom.
Garrett GT35r .63ex/.70cmp Turbo w/polished compressor housing
Custom fabricated turbo manifold 03+ Accord/TL 04+
Custom fabricated downpipe w/two 02 bungs welded in.
All ATP oil return/feed fittings and lines for turbo
Custom fabricated Intercooler Piping(black)
AEM Wideband O2 sensor and Guage
Turbo xs BOV RFL
Tial 44mm wastegate w/v-band flanges 4.6psi spring
Precision FMIC
RC 550cc injectors with clips
Custom Intake runners and Fuel rails for the RC injectors
Greddy electronic boost controller profec-b spec-II
Greddy turbo Timer
Denso Iridium Spark Plugs
Green 4" Air filter
Battery relocation wires, hardware and connectors(full kit)
Auto-meter ultralite II Boost Guage (30in Hg-Vac - 15psi Boost)
(2x)Auto-meter carbon fiber single Guage pod
All couplings and V-band's needed, included.
New DEI heat wrap for downpipe
Turbo Manifold and downpipe already completely wrapped with DEI heatwrap.
I will also Include the 3" full exhaust if you want it. It includes (2)Aero-turbine 2540i Mufflers and (1)Aero-turbine resonator It might be expensive to ship but the 3" exhaust is definitely a huge power gain for this setup. At 8psi you should be around 350whp and 325wtq at a bare minimum. I won't be surprised if whoever gets this kit makes over 400whp with 10psi easily.
$6000k FIRM+shiping
![](http://memimage.cardomain.net/member_images/11/web/683000-683999/683369_195_full.jpg)
Custom Polished Intake manifold for 6spd
Will fit 04+TL/03+AV6
I can paint the top cover any desired color if wanted or just leave it the way it is.
$250.00 shipped w/exchange of your manifold.
Here is a picture for comparison of the Intake manifold
![](http://memimage.cardomain.net/member_images/11/web/683000-683999/683369_372_full.jpg)
![](http://memimage.cardomain.net/member_images/11/web/683000-683999/683369_355_full.jpg)
![](http://memimage.cardomain.net/member_images/11/web/683000-683999/683369_333_full.jpg)
![](http://memimage.cardomain.net/member_images/11/web/683000-683999/683369_331_full.jpg)
Ingalls Rear Camber kit V6 03+ Accord NEW
Brand new
$130.00 shipped
Custom Carbon Fiber Triple Guage pod(w/o guages)
Paid 1k dollars for this to be made. If fits on the center of the dash and should fit V6 and 4cyl's and its only been used for 7-8 months. this is the high light of my interior and everyone that gets in my car compliments on it.
$550.00+ship
![](http://memimage.cardomain.net/member_images/11/web/683000-683999/683369_179_full.jpg)
![](http://memimage.cardomain.net/member_images/11/web/683000-683999/683369_182_full.jpg)
![](http://memimage.cardomain.net/member_images/11/web/683000-683999/683369_189_full.jpg)
![](http://memimage.cardomain.net/member_images/11/web/683000-683999/683369_184_full.jpg)
Tien SS-p Coilovers used for 8k miles perfect shape and condition.
840.00 shipped
![](http://memimage.cardomain.net/member_images/11/web/683000-683999/683369_199_full.jpg)
Brand new Clutch disc by Comptech. I have this left over from the Comptech Clutch Flywheel combo that I bought. I didn't use this because I bought a stage 3 from Spec.
$160.00 shipped
![](http://memimage.cardomain.net/member_images/11/web/683000-683999/683369_303_full.jpg)
Auto-meter Guage set(3)Brand new
Ultra-lite II
-Air/Fuel guage-
-oil pressure-
-water temp-
I will try to add some pictures later but they are brand new, perfect condition.
$215.00 shipped
PIAA 998 turbojector projector Fog lights w/hid
I have 3000k mculloch HID kit custom wired. one of the fog lights lense is cracked a little, but barely noticeable and doesn't affect the light. comes with all the neccesary hardware.
$210.00 shipped
![](http://memimage.cardomain.net/member_images/11/web/683000-683999/683369_81_full.jpg)
![](http://memimage.cardomain.net/member_images/11/web/683000-683999/683369_363_full.jpg)
J35A5 bare block w/o internals Brand New 250.00+shipping
![](http://memimage.cardomain.net/member_images/11/web/683000-683999/683369_268_full.jpg)
![](http://memimage.cardomain.net/member_images/11/web/683000-683999/683369_269_full.jpg)
Also willing to trade my body kit for anyone interested in the NYC/Tristate Area. I am just trying to get my car back to stock so I can sell it or trade it in. I might entertain offers to trade my car but it depends on what it is. 77k miles on chasis, brand new all OEM acura 3.5 swap check out my mods list for everything else. engine has around 1k miles on new motor . Car sold as is for 20k, buyer pays all shipping charges. Let me know if you have any more questions.
Logonzojls@yahoo.com
cell:631-680-4444
Logan
BTW, If you need any references I have many on .net, I have been a member there for over 3.5 years. s/n is Logonzojls
Last edited by LOGONZOJLS; 02-05-2007 at 12:03 PM.
![LOGONZOJLS is offline](https://acurazine.com/forums/images/maestro/statusicon/user_offline.gif)
#2
Intermediate
Join Date: May 2006
Location: Ottawa, Ont
Age: 49
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Do you know if the coilovers will fit an 05 TL AT?? If so Let's talk..
![Bigtuck is offline](https://acurazine.com/forums/images/maestro/statusicon/user_offline.gif)
#3
CAUTIONARY ADVISORY
We advise all prospective buyers (or sellers) to be aware that this is either a new member or one with less than 50 posts, so please proceed accordingly and with caution.
This in no way reflects on the integrity of the buyer or seller. It is a standard notice we put in for these members buying or selling items of substantial value.
![Ron A is offline](https://acurazine.com/forums/images/maestro/statusicon/user_offline.gif)
#4
I put the price for the new J35 block from your other thread in this thread. Let me know if you want to change anything. As far as I could tell, the block is the only thing in both threads. I usually don't like to have the same part in both threads, but I will leave it alone for now so you have a better chance of selling it.
![Ron A is offline](https://acurazine.com/forums/images/maestro/statusicon/user_offline.gif)
#5
Intermediate
Thread Starter
Originally Posted by Ron A
I put the price for the new J35 block from your other thread in this thread. Let me know if you want to change anything. As far as I could tell, the block is the only thing in both threads. I usually don't like to have the same part in both threads, but I will leave it alone for now so you have a better chance of selling it.
As for the Coilovers I am not sure if they will fit or not. I think I read at .net that the tsx is interchangable. so they might be. do some research and let me know.
Logan
![LOGONZOJLS is offline](https://acurazine.com/forums/images/maestro/statusicon/user_offline.gif)
#7
Racer
I checked the Tein website and found that the rear set shares the same part numbers (TL and AV6) but the fronts are different.
Accord fronts
9/504
SC090-01250
TL fronts
12/671
SB120-01200
AV6/TL rears
6/336
SC060-01250
kgf/mm,lbs/in
Part#
Also, from what I remember, the Ksport coils for the AV6 will also fit the TL so it may fit. I don't know if anyone has tried this yet though. Just some numbers for potential buyers. If it is unnecessary then can an op delete this post please. If I only had 9 bills to spend I would try it.
Accord fronts
9/504
SC090-01250
TL fronts
12/671
SB120-01200
AV6/TL rears
6/336
SC060-01250
kgf/mm,lbs/in
Part#
Also, from what I remember, the Ksport coils for the AV6 will also fit the TL so it may fit. I don't know if anyone has tried this yet though. Just some numbers for potential buyers. If it is unnecessary then can an op delete this post please. If I only had 9 bills to spend I would try it.
![Wish](https://acurazine.com/forums/images/smilies/wish.gif)
![EnvisionTL is offline](https://acurazine.com/forums/images/maestro/statusicon/user_offline.gif)
Trending Topics
#8
07 TL Morroccan Red!!
Join Date: Dec 2006
Location: Buckeye, AZ
Age: 37
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
I vouch for logon, done business with him a couple of times and he is a great seller/buyer. Why you parting everything out man????!! And hey will that clutch fit our accords?? if so i might be interested. I need a new clutch. dibs btw. Whats the bulb size for the HID kit for your projector's on your fogs?
Last edited by littletruong; 02-05-2007 at 04:57 PM.
![littletruong is offline](https://acurazine.com/forums/images/maestro/statusicon/user_offline.gif)
#10
tehLEGOman
Join Date: Dec 2004
Location: Charlotte, NC
Age: 41
Posts: 9,135
Received 1,982 Likes
on
1,335 Posts
You wouldn't be interested in sellin the pillow ball mounts separate by any chance would you? Cause those gold mounts are a good match for the greddy strut bar and i'm lookin for the accord tein pillow ball mounts.
Nice setup under the hood...did you happen to get your car featured in any magazines?
Nice setup under the hood...did you happen to get your car featured in any magazines?
![ACCURATEin is offline](https://acurazine.com/forums/images/maestro/statusicon/user_offline.gif)
#11
You can turbo anything
Join Date: Jan 2004
Location: Peachtree City/Ga State U,,GA
Age: 41
Posts: 347
Likes: 0
Received 0 Likes
on
0 Posts
Longshot, but let me know if you would be willing to pull out that gt35r from the kit...I would be interested.
![speedr73 is offline](https://acurazine.com/forums/images/maestro/statusicon/user_offline.gif)
#12
B A N N E D
Join Date: Oct 2004
Location: vancouver, BC
Age: 41
Posts: 976
Likes: 0
Received 0 Likes
on
0 Posts
I would be interested in the RC550 injectors with custom fuel rails.
![lookinco is offline](https://acurazine.com/forums/images/maestro/statusicon/user_offline.gif)
#13
Intermediate
Thread Starter
Originally Posted by lookinco
I would be interested in the RC550 injectors with custom fuel rails.
Originally Posted by speedr73
Longshot, but let me know if you would be willing to pull out that gt35r from the kit...I would be interested.
Originally Posted by ACCURATEin
You wouldn't be interested in sellin the pillow ball mounts separate by any chance would you? Cause those gold mounts are a good match for the greddy strut bar and i'm lookin for the accord tein pillow ball mounts.
Nice setup under the hood...did you happen to get your car featured in any magazines?
Nice setup under the hood...did you happen to get your car featured in any magazines?
Originally Posted by littletruong
I vouch for logon, done business with him a couple of times and he is a great seller/buyer. Why you parting everything out man????!! And hey will that clutch fit our accords?? if so i might be interested. I need a new clutch. dibs btw. Whats the bulb size for the HID kit for your projector's on your fogs?
Originally Posted by EnvisionTL
I checked the Tein website and found that the rear set shares the same part numbers (TL and AV6) but the fronts are different.
Accord fronts
9/504
SC090-01250
TL fronts
12/671
SB120-01200
AV6/TL rears
6/336
SC060-01250
kgf/mm,lbs/in
Part#
Also, from what I remember, the Ksport coils for the AV6 will also fit the TL so it may fit. I don't know if anyone has tried this yet though. Just some numbers for potential buyers. If it is unnecessary then can an op delete this post please. If I only had 9 bills to spend I would try it.![Wish](https://acurazine.com/forums/images/smilies/wish.gif)
Accord fronts
9/504
SC090-01250
TL fronts
12/671
SB120-01200
AV6/TL rears
6/336
SC060-01250
kgf/mm,lbs/in
Part#
Also, from what I remember, the Ksport coils for the AV6 will also fit the TL so it may fit. I don't know if anyone has tried this yet though. Just some numbers for potential buyers. If it is unnecessary then can an op delete this post please. If I only had 9 bills to spend I would try it.
![Wish](https://acurazine.com/forums/images/smilies/wish.gif)
Thank you for the help with the sale.
Originally Posted by MichaelBenz
nice stuff.
Also all PM's replied to.
L
![LOGONZOJLS is offline](https://acurazine.com/forums/images/maestro/statusicon/user_offline.gif)
#16
07 TL Morroccan Red!!
Join Date: Dec 2006
Location: Buckeye, AZ
Age: 37
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
edit by mod Ron A: link deleted. Send a PM please.
![littletruong is offline](https://acurazine.com/forums/images/maestro/statusicon/user_offline.gif)
#19
Intermediate
Thread Starter
Originally Posted by MichaelBenz
I dont PM...full box. See question above. Edit...just cleared some space for incoming.
![Thumbs Up](https://acurazine.com/forums/images/smilies/thumbsup.gif)
![LOGONZOJLS is offline](https://acurazine.com/forums/images/maestro/statusicon/user_offline.gif)
#20
Senior Moderator
Regional Coordinator
(Mid-Atlantic)
Regional Coordinator
(Mid-Atlantic)
iTrader: (6)
Originally Posted by CL Platano
Thats crazy man you just got ride of the month on the other site..good luck with the sale
![97BlackAckCL is offline](https://acurazine.com/forums/images/maestro/statusicon/user_offline.gif)
#21
Intermediate
Thread Starter
Originally Posted by 97BlackAckCL
I knew I knew that car from somewhere! Sucks you're parting bro, I'm interested in the j35 block
Probably won't be parting out the engine. It just won't be justified by the amount of work involved. Sorry
![LOGONZOJLS is offline](https://acurazine.com/forums/images/maestro/statusicon/user_offline.gif)
#30
Intermediate
Thread Starter
fogs are already sold, wheels, turbo kit still for sale....I can't believe the turbo is still for sale with all the people in the 3gen soooo interested in getting a turbo....but nobody is interested in it.... all high quality parts...lol
![LOGONZOJLS is offline](https://acurazine.com/forums/images/maestro/statusicon/user_offline.gif)
#31
07 TL Morroccan Red!!
Join Date: Dec 2006
Location: Buckeye, AZ
Age: 37
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
sent you a pm logon
![littletruong is offline](https://acurazine.com/forums/images/maestro/statusicon/user_offline.gif)
#33
07 TL Morroccan Red!!
Join Date: Dec 2006
Location: Buckeye, AZ
Age: 37
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by LOGONZOJLS
bump! give me a call alex... 631-680-4444
![littletruong is offline](https://acurazine.com/forums/images/maestro/statusicon/user_offline.gif)
#34
347hp/300tq @ 4psi
iTrader: (3)
Originally Posted by LOGONZOJLS
fogs are already sold, wheels, turbo kit still for sale....I can't believe the turbo is still for sale with all the people in the 3gen soooo interested in getting a turbo....but nobody is interested in it.... all high quality parts...lol
dude trust me, if i didnt already have my SC, i would have bought this thing off you the first day you had it for sale. i cant believe its not gone LOL
free bump for you
![04accordcpe is offline](https://acurazine.com/forums/images/maestro/statusicon/user_offline.gif)
#35
07 TL Morroccan Red!!
Join Date: Dec 2006
Location: Buckeye, AZ
Age: 37
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by blusap
dude trust me, if i didnt already have my SC, i would have bought this thing off you the first day you had it for sale. i cant believe its not gone LOL
free bump for you
free bump for you
i'm working on it sean.. hopefully i can pull something out of my azz lol
![littletruong is offline](https://acurazine.com/forums/images/maestro/statusicon/user_offline.gif)
#36
07 TL Morroccan Red!!
Join Date: Dec 2006
Location: Buckeye, AZ
Age: 37
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
Hey logan call me back when you get a chance, you were pretty busy so yea.. lets work this out!
![littletruong is offline](https://acurazine.com/forums/images/maestro/statusicon/user_offline.gif)
#38
07 TL Morroccan Red!!
Join Date: Dec 2006
Location: Buckeye, AZ
Age: 37
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
hey logan you still have the 3 inch exhaust with it right?? You gonna include that also correct? i'll let you know whats up by the end of this week. But so far its looking good!
![Wish](https://acurazine.com/forums/images/smilies/wish.gif)
![littletruong is offline](https://acurazine.com/forums/images/maestro/statusicon/user_offline.gif)
#40
07 TL Morroccan Red!!
Join Date: Dec 2006
Location: Buckeye, AZ
Age: 37
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by blusap
![Thumbs Up](https://acurazine.com/forums/images/smilies/thumbsup.gif)
![littletruong is offline](https://acurazine.com/forums/images/maestro/statusicon/user_offline.gif)