dr_brains510

A. Enkei Rims

Up for sale I've got 4 Enkei RPF1 rims with tires. Here are some specs of the rims:

Brand: Enkei
Model: RPF1
Size: 17 x 8.5
Offset: 30
Bolt Pattern: 5 x 114.3
Weight: 16.0 lbs.
Color: Custom painted black; originally silver.
Center Caps: Original Enkei Racing center caps.
Tires: Dunlop Direzza Sport Z1 Star Spec; 245/40/17 all around with 80% thread left on all of them.

There are two of the rims that have slight bends in them. That's it though; no scratches anywhere, just the slight bends. Here are those two rims:

Rim 1:





Rim 2:





The other two rims in in perfect condition with no scratches or bends. Here are pics of those two rims:

Rim 3:



Rim 4:




Here are some pics of them on my car:













I will not be selling the rims and tires separately. So they come as a package deal.

Price: $1300 picked up; for shipped, my zip is 91411 so send me your zip and I'll get a quote or you can get a quote yourself.

My paypal address is dr_brains510@hotmail.com. Send me any questions you have and I'll reply as soon as I get them. Thanks.


B. UR Underdrive Pulley

Hey everyone, I'm selling my Unorthodox Racing Pulley. It is the underdrive one not the stock sized one. It comes with the timing belt as well. It only has ~8500 miles on it and is running strong. It will come off my car this Wednesday.

Price: $175 picked up; $185 shipped.

My paypal address is dr_brains510@hotmail.com. PM me if anyone has any questions; also, pm me if you are going to purchase it instead of sending the money straight to my paypal.

Thanks.

C. 2007-2008 ASM Aspec Rear Lip

Hey everyone. I want to swap my rear bumper with the aspec rear lip already installed on it for just another bumper w/o any kit on it. My color is ASM but I've seen SSM and I don't think there is much of a difference. If anyone has an ASM Type S or SSM TL and wants the aspec rear lip, here is your chance. The bumper is flawless and I installed it in July '09. I would prefer a local swap obviously. I'm located in Van Nuys, California. So it'd be a swap for your bumper plus $240 cash.

Here is a picture of it on my car:



Let me know if anyone has any questions.

snake134

iTrader: (1)

thread hijack. did you feel a difference in handling/acceleration when you put these one. 8lb per wheel is a pretty significant weight loss. glws.

dr_brains510

There was a Major difference. Especially considering I had staggered 19's before. Getting it off the line was the major improvement (even though handling is up there too). The reason for that is obviously because I've got one of the best tires on it.

dr_brains510

I forgot to mention that these DO come with the TPMS.

dr_brains510

Bump....Come on ppl...no one wants sexy lightweight rims on this forum?

piggydog

nice rims but why would you want to go from these nice lightweight rims the heavier stock ones?

dr_brains510

B/c I'm getting another car.

ASASN21

How did you manage to bend 2 of the lips with those beefy ass tires on them? LOL.

I'm interested in these, but I am wondering how they will fit being that I am dropped 2" and those tires are pretty wide. Hmmmmm...

BTW I have a set of 2008 TL-S wheels w/TPMS in perfect condition.

dr_brains510

The 405 freeway is the one who caused my rims to bend a bit. Btw, you've got pm!

Tl-sNbp07

iTrader: (1)

Good stuff bro good price too

Tl-sNbp07

iTrader: (1)

did you drop the car were the fenders rolled?

dr_brains510

No never dropped my car.

RIGA

iTrader: (1)

Thanks, you you have a price estimate because I'm guessing after they fix the bends they will need to mounted and balanced again. I think fixing the bends could quickly add a lot to the cost of these wheels.

dr_brains510

PM'ed

clemdaddy

Will these clear the brembos?

dr_brains510

Thx.

Yes they will clear the brembo's. I have a type-s and they are the perfect fit.

n1njai

iTrader: (3)

I feel ya on the 405 man...i hate it, especially when im going to woodland hills. GLWS if you still have these in 2 months i'll pick them up lol.

dr_brains510

Thx bro...I might have to hold you to that in case no one wants them lol

dr_brains510

Hey everyone. Here is the second thread that was merged with the others. Again, feel free if to pm me or post on the thread if you have any questions. Please, if you have any questions regarding the price of anything I'm selling, just pm me. Don't write "I got it for this price" and other nonsense like that.

dr_brains510

Price drop on a few items:

Rims w/ tires- $1150 shipped
Pulley- $175 shipped

RIGA

iTrader: (1)

Have the bends been fixed?

dr_brains510

Pm'ed.

dr_brains510

I got a quote to fix it but I haven't done it. It is going to cost me $200 to do it. If I go ahead and fix the bends then I'm going to have to raise the price by $150 dollars.

Ron A

The closest I could get to these wheels is here which shows a price of $259.99 each without tires. I used this page because the wheels were originally silver and are now painted black. It looks like the tires sell for a little over $600 new, and now have about 80% tread remaining.

This gets the selling price, which now includes shipping, closer to what it should be, but possibly a little high considering the bends. Some may consider it high, but I'm sure the condition and other factors will be taken into consideration when entering into any negotiations for the wheels. In my opinion, adding too much to the current selling price for fixing the bends might not be reasonable.

I've cleaned up the thread and people can now make their own decisions about these wheels, and are probably aware that there has been considerable controversy concerning the selling price.

dr_brains510

First of all, thanks for cleaning up the thread. Secondly, let's take into consideration your finding. So $260 each wheel times 4 is $1040 plus $600 for tires equals $1640. You forgot to add $25 each for the center caps, so that's another $100 which brings the total to $1740. So looking at my asking of $1150 with bends and SHIPPED is very good in my opinion of course. Even if I went ahead and fixed the rims and paid the $200 and added that to the price and made it $1350 shipped it still would be a good deal. So I don't see why people are low balling me like crazy here thinking they can get these wheels for $800 when those $800 are all scratched up and not even black or have original center caps not to mention fixing the scratches is going to cost atleast $50 a wheel to fix. Maybe I should fix the bends and just sell the rims for over a $1000 because then they'd look flawless minus the fact that they are used. As of now, my price stays until further notice.

dr_brains510

Ron, the link you provided shows the 17 x 7 at $259.99. Mine's are the 17 x 8.5 which on that same website shows $269.99. On another note, that is the SBC (Special Brillant Coating) mine's are custom painted black.

Ron A

No more pricing or other comments unless you are interested in the sale.

There has been enough said here so people should know enough to do their homework and make up their own minds.

A free vacation will be awarded to those who don't want to comply with this.

artistotle

iTrader: (3)

Enkei offers it's SBC finish at a pretty big price premium, so consider that to be on par with your custom paintjob. But you are right about the width of the wheels making them more valuable.

AnthraciteAspec

iTrader: (6)

405 strikes again! I am tempted to pick these up so I have some track wheels, but hesitant because I don't want to deal with fixing the bends...

dr_brains510

Pm'ed

dr_brains510

Update:

*UR Pulley*- SOLD!
*Aspec Rear w/ bumper*- $200 plus your type-s bumper
*Rims w/ tires*- $1000

RIGA

iTrader: (1)

Is that the shipped price?

dr_brains510

Yes

ASASN21

Still keep coming back to look at these but just can't make a decision...

Could you elaborate on the bends a little bit for me? Any driving issues because of them? Road vibrations, handling issues, loss of air, etc etc...

dr_brains510

Absolutely NOT to any of the issues. Like I've said before in the thread, the only thing is the two of the rims have bends. To be honest, the bend on one of the rims is pretty obvious. The other one you'd have to come and look directly at the rim. Again, no loss of air, no vibrations, no problem taking sharp turns or even your basic daily driving. The only thing is that the two rims have bends. It's more of a visual problem than anything.

dr_brains510

Update:

*UR Pulley*- SOLD!
*Aspec Rear w/ bumper*- $200 plus your type-s bumper
*Rims w/ tires*- SOLD!