Acura KEYFOB / remote
04-17-2009, 04:13 PM
#1
Acura KEYFOB / remote
For sale is 1 acura key fob (not a switchblade). It is for Driver 2, but if you do not link it with your car, you will still be able to use it without messing with any of your memory settings. In other words, you can use it as an extra remote for your car. It never has been used and I believe the battery is still in working condition.
FCC: E4EG8D-444H-A
Canada: 8501021819
G8D-444H-A
Price: 23 shipped & will even throw in the acura key chain for free!
PM me for my paypal address
FCC: E4EG8D-444H-A
Canada: 8501021819
G8D-444H-A
Price: 23 shipped & will even throw in the acura key chain for free!
PM me for my paypal address
04-17-2009, 08:54 PM
#2
The remote is from a 2003 TL.
Looks like it works with 2nd gen TLs and 2nd gen CLs. Could work on other models as well, but be sure to verify that the FCC ID matches yours.
Programming is fairly simple..see nate340's post below..
Looks like it works with 2nd gen TLs and 2nd gen CLs. Could work on other models as well, but be sure to verify that the FCC ID matches yours.
Programming is fairly simple..see nate340's post below..
Here are directions on programming it for a TL all Acuras may be the same though:
1. Turn the ignition switch ON (II).
2 Within 1-4 seconds push the transmitter lock or the unlock button.
3 Within 1-4 seconds turn the ignition switch OFF
4 Within 1-4 seconds turn the ignition switch ON (II).
5 Within 1-4 seconds push the transmitter lock or the unlock buttin.
6. Within 1-4 seconds turn the ignition switch OFF.
7. Within 1-4 seconds turn the ignition switch ON (II).
8. Within 1-4 seconds push the transmitter lock or the unlock button.
9. Within 1-4 seconds turn the ignition switch OFF.
10. Within 1-4 seconds turn the ignition switch ON (II).
11. Within 1-4 seconds push the transmitter lock or the unlock button.
12. Confirm you can hear the sound on the door lock actuators. Within 1-4 seconds, push the transmittor lock or onlock button again.
13. Within 10 sec, aim the transmitters whos codes you want to store at the receiver, and press the transmitter lock or unlock buttons. Confirm that you can hear the sound of the door lock actuators after each transmitter code is stores. Make sure you program all transmitters you want working within 10 seconds of each other. Ones not included in this programming will no longer work.
14. Turn the ignition switch OFF, and pull out the key
1. Turn the ignition switch ON (II).
2 Within 1-4 seconds push the transmitter lock or the unlock button.
3 Within 1-4 seconds turn the ignition switch OFF
4 Within 1-4 seconds turn the ignition switch ON (II).
5 Within 1-4 seconds push the transmitter lock or the unlock buttin.
6. Within 1-4 seconds turn the ignition switch OFF.
7. Within 1-4 seconds turn the ignition switch ON (II).
8. Within 1-4 seconds push the transmitter lock or the unlock button.
9. Within 1-4 seconds turn the ignition switch OFF.
10. Within 1-4 seconds turn the ignition switch ON (II).
11. Within 1-4 seconds push the transmitter lock or the unlock button.
12. Confirm you can hear the sound on the door lock actuators. Within 1-4 seconds, push the transmittor lock or onlock button again.
13. Within 10 sec, aim the transmitters whos codes you want to store at the receiver, and press the transmitter lock or unlock buttons. Confirm that you can hear the sound of the door lock actuators after each transmitter code is stores. Make sure you program all transmitters you want working within 10 seconds of each other. Ones not included in this programming will no longer work.
14. Turn the ignition switch OFF, and pull out the key
Thread
Thread Starter
Forum
Replies
Last Post
8501021819, acura, fob, g8d444ha, key, keyfob, linking, prices, programming, rsx, sale, switchblade, type, work
