Shelby: Cobra news **2014 Versions Revealed (page 2)**
#7
Ford's Shelby Cobra Concept is Possible Next Step
Press Releases
By: Brad Nevin | Ford Communications Network
The new Ford GT and Mustang have arrived. Ford's Shelby Cobra concept signals a possible next step in the blue oval performance lineup.
DETROIT – Huge engine, tiny car.
Those are the two founding principles of the Ford Shelby Cobra concept on display in Detroit at the 2004 North American International Auto Show.
It's the foundation motor racing legend Carroll Shelby used when he built the legendary Cobra with a 427-cubic-inch V-8 engine under the hood of a tiny British roadster in 1964. And it’s the formula Ford is using today to build a powerful, fully developed, production-feasible concept car.
Shorter than a Mazda Miata and weighing just more than 3,000 pounds, the Shelby Cobra concept has a 605-horsepower, all-aluminum V-10 engine mounted at the front of an advanced Ford GT-based aluminum chassis.
There is no roof, no side glass and no radio.
"That's the formula," says Shelby. "It's a massive motor in a tiny, lightweight car."
Loosely based on the 4.6-liter, 32-valve V-8 used in the 2004 Mustang Mach I, the Ford Shelby Cobra concept engine has 10 cylinders and is bored and stroked for a 6.4-liter displacement.
"In many ways, it's not very exotic," says Graham Hoare, director for Ford research and advanced engineering. "It uses the same basic castings and assembly techniques as our production modular engine family. The output, though, is phenomenal. If you can't get in trouble with this kind of power, you're not trying hard enough."
The Shelby Cobra concept's engine has 10 cylinders and is bored and stroked for a 6.4-liter displacement.
With a front-mounted engine and a rear-mounted transmission, the Shelby Cobra concept has nearly perfect 50/50 weight distribution and a surprisingly roomy cockpit. Because the transmission is rear-mounted, there is no large center tunnel between the seats. This allows the driver and passenger to sit relatively close to one another, and there is as much front legroom as in a Crown Victoria. Instruments include a 220-mph speedometer, a 10,000-rpm tachometer and critical temperature and pressure readouts.
When a think tank in Dearborn set to designing and engineering the Shelby Cobra concept, they looked to another recently completed project at Ford for ideas – the Ford GT.
"We were planning to use the Ford GT suspension systems, and we asked ourselves how much more of the Ford GT could we borrow," says Manfred Rumpel, manager, advanced product development.
Quite a lot, they discovered.
Key design details include a predominant grille opening.
The Shelby Cobra team worked closely with John Coletti, head of engineering for Ford's Special Vehicle Team, to maximize commonality with the Ford GT supercar. The bulk rear structure of the Shelby Cobra concept is made from slightly modified Ford GT components, including the massive cast-aluminum suspension nodes, the rear rails and bumper beam, a major cross member and the brackets used to mount the transmission to the car. The center portion of the space frame also has a high level of commonality with the Ford GT, as its major aluminum extrusions are based heavily on existing pieces.
Even though it shares many parts with the Ford GT, the Shelby Cobra concept is more than two feet shorter with a wheelbase that is nearly seven inches shorter. Comparatively small proportions like this gave designers the chance to create a body that is tightly wrapped around its engine and chassis.
"We let the powertrain, the space frame and the suspension dictate the architecture for the body," says Richard Hutting, chief designer. "And the result was a very modern and desirable shape that doesn't share a single dimension or proportion with the original Shelby Cobra."
Inside, the Shelby Cobra concept is trimmed mostly in aluminum, with electric blue splashed on the seat trim and steering col. A full-width aluminum instrument panel spans the cockpit in one unbroken swath.
Key design details include a predominant grille opening, vertical bumper bars, the side air intake, a powerful bulge over each wheel and stacked lamps in the front and rear. Because the engine sits rearward of the front wheels, the concept's front overhang is short. An equally short rear overhang gives the Shelby Cobra concept a short 100-inch wheelbase. These proportions instantly communicate rear-wheel-drive power and serious performance. The stance of the car on the road is unmistakably powerful and sure-footed. More subtle design touches include no windshield wipers, no side windows and no convertible top.
Those wishing fair-weather, fast driving on open roads need only apply.
"When you're setting out to tell a story about an automobile in a fresh, contemporary way, you're not actually looking to create beauty – you're looking to create meaning," says J Mays, Ford Motor Company group vice president, design. "We have interpreted that ass-kicking Cobra attitude in a very modern way."
The Shelby Cobra concept was built in just five months at a relatively low cost by a select group of Ford enthusiasts in Dearborn, Mich. It's a fully developed and engineered racing roadster that represents the best modern racing technology Ford has to offer today. When parked next to the all-new Ford GT supercar and the redesigned 2005 Mustang coupe, the Shelby Cobra concept completes a trilogy of legendary Ford performance vehicles and signals what might be a next step for the blue oval.
Press Releases
By: Brad Nevin | Ford Communications Network
The new Ford GT and Mustang have arrived. Ford's Shelby Cobra concept signals a possible next step in the blue oval performance lineup.
DETROIT – Huge engine, tiny car.
Those are the two founding principles of the Ford Shelby Cobra concept on display in Detroit at the 2004 North American International Auto Show.
It's the foundation motor racing legend Carroll Shelby used when he built the legendary Cobra with a 427-cubic-inch V-8 engine under the hood of a tiny British roadster in 1964. And it’s the formula Ford is using today to build a powerful, fully developed, production-feasible concept car.
Shorter than a Mazda Miata and weighing just more than 3,000 pounds, the Shelby Cobra concept has a 605-horsepower, all-aluminum V-10 engine mounted at the front of an advanced Ford GT-based aluminum chassis.
There is no roof, no side glass and no radio.
"That's the formula," says Shelby. "It's a massive motor in a tiny, lightweight car."
Loosely based on the 4.6-liter, 32-valve V-8 used in the 2004 Mustang Mach I, the Ford Shelby Cobra concept engine has 10 cylinders and is bored and stroked for a 6.4-liter displacement.
"In many ways, it's not very exotic," says Graham Hoare, director for Ford research and advanced engineering. "It uses the same basic castings and assembly techniques as our production modular engine family. The output, though, is phenomenal. If you can't get in trouble with this kind of power, you're not trying hard enough."
The Shelby Cobra concept's engine has 10 cylinders and is bored and stroked for a 6.4-liter displacement.
With a front-mounted engine and a rear-mounted transmission, the Shelby Cobra concept has nearly perfect 50/50 weight distribution and a surprisingly roomy cockpit. Because the transmission is rear-mounted, there is no large center tunnel between the seats. This allows the driver and passenger to sit relatively close to one another, and there is as much front legroom as in a Crown Victoria. Instruments include a 220-mph speedometer, a 10,000-rpm tachometer and critical temperature and pressure readouts.
When a think tank in Dearborn set to designing and engineering the Shelby Cobra concept, they looked to another recently completed project at Ford for ideas – the Ford GT.
"We were planning to use the Ford GT suspension systems, and we asked ourselves how much more of the Ford GT could we borrow," says Manfred Rumpel, manager, advanced product development.
Quite a lot, they discovered.
Key design details include a predominant grille opening.
The Shelby Cobra team worked closely with John Coletti, head of engineering for Ford's Special Vehicle Team, to maximize commonality with the Ford GT supercar. The bulk rear structure of the Shelby Cobra concept is made from slightly modified Ford GT components, including the massive cast-aluminum suspension nodes, the rear rails and bumper beam, a major cross member and the brackets used to mount the transmission to the car. The center portion of the space frame also has a high level of commonality with the Ford GT, as its major aluminum extrusions are based heavily on existing pieces.
Even though it shares many parts with the Ford GT, the Shelby Cobra concept is more than two feet shorter with a wheelbase that is nearly seven inches shorter. Comparatively small proportions like this gave designers the chance to create a body that is tightly wrapped around its engine and chassis.
"We let the powertrain, the space frame and the suspension dictate the architecture for the body," says Richard Hutting, chief designer. "And the result was a very modern and desirable shape that doesn't share a single dimension or proportion with the original Shelby Cobra."
Inside, the Shelby Cobra concept is trimmed mostly in aluminum, with electric blue splashed on the seat trim and steering col. A full-width aluminum instrument panel spans the cockpit in one unbroken swath.
Key design details include a predominant grille opening, vertical bumper bars, the side air intake, a powerful bulge over each wheel and stacked lamps in the front and rear. Because the engine sits rearward of the front wheels, the concept's front overhang is short. An equally short rear overhang gives the Shelby Cobra concept a short 100-inch wheelbase. These proportions instantly communicate rear-wheel-drive power and serious performance. The stance of the car on the road is unmistakably powerful and sure-footed. More subtle design touches include no windshield wipers, no side windows and no convertible top.
Those wishing fair-weather, fast driving on open roads need only apply.
"When you're setting out to tell a story about an automobile in a fresh, contemporary way, you're not actually looking to create beauty – you're looking to create meaning," says J Mays, Ford Motor Company group vice president, design. "We have interpreted that ass-kicking Cobra attitude in a very modern way."
The Shelby Cobra concept was built in just five months at a relatively low cost by a select group of Ford enthusiasts in Dearborn, Mich. It's a fully developed and engineered racing roadster that represents the best modern racing technology Ford has to offer today. When parked next to the all-new Ford GT supercar and the redesigned 2005 Mustang coupe, the Shelby Cobra concept completes a trilogy of legendary Ford performance vehicles and signals what might be a next step for the blue oval.
Trending Topics
#8
Ford's Shelby Cobra Concept is Possible Next Step
Press Releases
By: Brad Nevin | Ford Communications Network
The new Ford GT and Mustang have arrived. Ford's Shelby Cobra concept signals a possible next step in the blue oval performance lineup.
DETROIT – Huge engine, tiny car.
Those are the two founding principles of the Ford Shelby Cobra concept on display in Detroit at the 2004 North American International Auto Show.
It's the foundation motor racing legend Carroll Shelby used when he built the legendary Cobra with a 427-cubic-inch V-8 engine under the hood of a tiny British roadster in 1964. And it’s the formula Ford is using today to build a powerful, fully developed, production-feasible concept car.
Shorter than a Mazda Miata and weighing just more than 3,000 pounds, the Shelby Cobra concept has a 605-horsepower, all-aluminum V-10 engine mounted at the front of an advanced Ford GT-based aluminum chassis.
There is no roof, no side glass and no radio.
"That's the formula," says Shelby. "It's a massive motor in a tiny, lightweight car."
Loosely based on the 4.6-liter, 32-valve V-8 used in the 2004 Mustang Mach I, the Ford Shelby Cobra concept engine has 10 cylinders and is bored and stroked for a 6.4-liter displacement.
"In many ways, it's not very exotic," says Graham Hoare, director for Ford research and advanced engineering. "It uses the same basic castings and assembly techniques as our production modular engine family. The output, though, is phenomenal. If you can't get in trouble with this kind of power, you're not trying hard enough."
The Shelby Cobra concept's engine has 10 cylinders and is bored and stroked for a 6.4-liter displacement.
With a front-mounted engine and a rear-mounted transmission, the Shelby Cobra concept has nearly perfect 50/50 weight distribution and a surprisingly roomy cockpit. Because the transmission is rear-mounted, there is no large center tunnel between the seats. This allows the driver and passenger to sit relatively close to one another, and there is as much front legroom as in a Crown Victoria. Instruments include a 220-mph speedometer, a 10,000-rpm tachometer and critical temperature and pressure readouts.
When a think tank in Dearborn set to designing and engineering the Shelby Cobra concept, they looked to another recently completed project at Ford for ideas – the Ford GT.
"We were planning to use the Ford GT suspension systems, and we asked ourselves how much more of the Ford GT could we borrow," says Manfred Rumpel, manager, advanced product development.
Quite a lot, they discovered.
Key design details include a predominant grille opening.
The Shelby Cobra team worked closely with John Coletti, head of engineering for Ford's Special Vehicle Team, to maximize commonality with the Ford GT supercar. The bulk rear structure of the Shelby Cobra concept is made from slightly modified Ford GT components, including the massive cast-aluminum suspension nodes, the rear rails and bumper beam, a major cross member and the brackets used to mount the transmission to the car. The center portion of the space frame also has a high level of commonality with the Ford GT, as its major aluminum extrusions are based heavily on existing pieces.
Even though it shares many parts with the Ford GT, the Shelby Cobra concept is more than two feet shorter with a wheelbase that is nearly seven inches shorter. Comparatively small proportions like this gave designers the chance to create a body that is tightly wrapped around its engine and chassis.
"We let the powertrain, the space frame and the suspension dictate the architecture for the body," says Richard Hutting, chief designer. "And the result was a very modern and desirable shape that doesn't share a single dimension or proportion with the original Shelby Cobra."
Inside, the Shelby Cobra concept is trimmed mostly in aluminum, with electric blue splashed on the seat trim and steering col. A full-width aluminum instrument panel spans the cockpit in one unbroken swath.
Key design details include a predominant grille opening, vertical bumper bars, the side air intake, a powerful bulge over each wheel and stacked lamps in the front and rear. Because the engine sits rearward of the front wheels, the concept's front overhang is short. An equally short rear overhang gives the Shelby Cobra concept a short 100-inch wheelbase. These proportions instantly communicate rear-wheel-drive power and serious performance. The stance of the car on the road is unmistakably powerful and sure-footed. More subtle design touches include no windshield wipers, no side windows and no convertible top.
Those wishing fair-weather, fast driving on open roads need only apply.
"When you're setting out to tell a story about an automobile in a fresh, contemporary way, you're not actually looking to create beauty – you're looking to create meaning," says J Mays, Ford Motor Company group vice president, design. "We have interpreted that ass-kicking Cobra attitude in a very modern way."
The Shelby Cobra concept was built in just five months at a relatively low cost by a select group of Ford enthusiasts in Dearborn, Mich. It's a fully developed and engineered racing roadster that represents the best modern racing technology Ford has to offer today. When parked next to the all-new Ford GT supercar and the redesigned 2005 Mustang coupe, the Shelby Cobra concept completes a trilogy of legendary Ford performance vehicles and signals what might be a next step for the blue oval.
Press Releases
By: Brad Nevin | Ford Communications Network
The new Ford GT and Mustang have arrived. Ford's Shelby Cobra concept signals a possible next step in the blue oval performance lineup.
DETROIT – Huge engine, tiny car.
Those are the two founding principles of the Ford Shelby Cobra concept on display in Detroit at the 2004 North American International Auto Show.
It's the foundation motor racing legend Carroll Shelby used when he built the legendary Cobra with a 427-cubic-inch V-8 engine under the hood of a tiny British roadster in 1964. And it’s the formula Ford is using today to build a powerful, fully developed, production-feasible concept car.
Shorter than a Mazda Miata and weighing just more than 3,000 pounds, the Shelby Cobra concept has a 605-horsepower, all-aluminum V-10 engine mounted at the front of an advanced Ford GT-based aluminum chassis.
There is no roof, no side glass and no radio.
"That's the formula," says Shelby. "It's a massive motor in a tiny, lightweight car."
Loosely based on the 4.6-liter, 32-valve V-8 used in the 2004 Mustang Mach I, the Ford Shelby Cobra concept engine has 10 cylinders and is bored and stroked for a 6.4-liter displacement.
"In many ways, it's not very exotic," says Graham Hoare, director for Ford research and advanced engineering. "It uses the same basic castings and assembly techniques as our production modular engine family. The output, though, is phenomenal. If you can't get in trouble with this kind of power, you're not trying hard enough."
The Shelby Cobra concept's engine has 10 cylinders and is bored and stroked for a 6.4-liter displacement.
With a front-mounted engine and a rear-mounted transmission, the Shelby Cobra concept has nearly perfect 50/50 weight distribution and a surprisingly roomy cockpit. Because the transmission is rear-mounted, there is no large center tunnel between the seats. This allows the driver and passenger to sit relatively close to one another, and there is as much front legroom as in a Crown Victoria. Instruments include a 220-mph speedometer, a 10,000-rpm tachometer and critical temperature and pressure readouts.
When a think tank in Dearborn set to designing and engineering the Shelby Cobra concept, they looked to another recently completed project at Ford for ideas – the Ford GT.
"We were planning to use the Ford GT suspension systems, and we asked ourselves how much more of the Ford GT could we borrow," says Manfred Rumpel, manager, advanced product development.
Quite a lot, they discovered.
Key design details include a predominant grille opening.
The Shelby Cobra team worked closely with John Coletti, head of engineering for Ford's Special Vehicle Team, to maximize commonality with the Ford GT supercar. The bulk rear structure of the Shelby Cobra concept is made from slightly modified Ford GT components, including the massive cast-aluminum suspension nodes, the rear rails and bumper beam, a major cross member and the brackets used to mount the transmission to the car. The center portion of the space frame also has a high level of commonality with the Ford GT, as its major aluminum extrusions are based heavily on existing pieces.
Even though it shares many parts with the Ford GT, the Shelby Cobra concept is more than two feet shorter with a wheelbase that is nearly seven inches shorter. Comparatively small proportions like this gave designers the chance to create a body that is tightly wrapped around its engine and chassis.
"We let the powertrain, the space frame and the suspension dictate the architecture for the body," says Richard Hutting, chief designer. "And the result was a very modern and desirable shape that doesn't share a single dimension or proportion with the original Shelby Cobra."
Inside, the Shelby Cobra concept is trimmed mostly in aluminum, with electric blue splashed on the seat trim and steering col. A full-width aluminum instrument panel spans the cockpit in one unbroken swath.
Key design details include a predominant grille opening, vertical bumper bars, the side air intake, a powerful bulge over each wheel and stacked lamps in the front and rear. Because the engine sits rearward of the front wheels, the concept's front overhang is short. An equally short rear overhang gives the Shelby Cobra concept a short 100-inch wheelbase. These proportions instantly communicate rear-wheel-drive power and serious performance. The stance of the car on the road is unmistakably powerful and sure-footed. More subtle design touches include no windshield wipers, no side windows and no convertible top.
Those wishing fair-weather, fast driving on open roads need only apply.
"When you're setting out to tell a story about an automobile in a fresh, contemporary way, you're not actually looking to create beauty – you're looking to create meaning," says J Mays, Ford Motor Company group vice president, design. "We have interpreted that ass-kicking Cobra attitude in a very modern way."
The Shelby Cobra concept was built in just five months at a relatively low cost by a select group of Ford enthusiasts in Dearborn, Mich. It's a fully developed and engineered racing roadster that represents the best modern racing technology Ford has to offer today. When parked next to the all-new Ford GT supercar and the redesigned 2005 Mustang coupe, the Shelby Cobra concept completes a trilogy of legendary Ford performance vehicles and signals what might be a next step for the blue oval.
#13
Moderator Alumnus
Thread Starter
Join Date: Oct 2000
Location: Washington DC (NOVA)
Age: 52
Posts: 16,399
Likes: 0
Received 8 Likes
on
8 Posts
![](http://www.thecarconnection.com/images/gallery/7620_image.jpg)
Shelby Strikes Back
Don't head for the showroom yet, but odds are looking good that the Shelby Cobra will be back in all new form in the not too distant future. Forty years after he first teamed up with Ford Motor Co., Shelby has renewed his relationship with the number two automaker, and the first product of that partnership took a bow during an auto show dinner Sunday night. Think of it as a "minimalist" muscle car, said Ford's director of design, J Mays, "No roof, no side glass, no radio and, thank God, not a single cupholder." But the reborn roadster does boast a 6.4-liter V-10 that, in normally-aspirated trim, puts out 605 horsepower and 501 lb-feet of torque through the car's 19-inch rear wheels. That's enough to launch it from 0-60 in under 10 seconds and deliver an ungoverned top speed of 190 mph.
If that's not enough, a supercharger could "easily hit 700" hp, according to advanced product chief Chris Theodore. Like its crosstown competitors, Ford officials insisted that their new supercar is "just a concept," but they didn't work very hard to convince the crowd. "We built the Ford GT a year after we showed the concept," conceded Mays, and we built the Mustang a year after we showed you that concept. You do the math. How much would a product Cobra add up to? Definitely less than the $139,000 Ford GT, and more likely in line with the Dodge Viper, in the $80,000 to $90,000 range, it appears. In production, Ford would likely add roll-up windows and a very basic, removable soft-top.
Source: The Car Connection
#14
Moderator Alumnus
Thread Starter
Join Date: Oct 2000
Location: Washington DC (NOVA)
Age: 52
Posts: 16,399
Likes: 0
Received 8 Likes
on
8 Posts
![](http://www.thecarconnection.com/images/gallery/7620_image.jpg)
Shelby Strikes Back
Don't head for the showroom yet, but odds are looking good that the Shelby Cobra will be back in all new form in the not too distant future. Forty years after he first teamed up with Ford Motor Co., Shelby has renewed his relationship with the number two automaker, and the first product of that partnership took a bow during an auto show dinner Sunday night. Think of it as a "minimalist" muscle car, said Ford's director of design, J Mays, "No roof, no side glass, no radio and, thank God, not a single cupholder." But the reborn roadster does boast a 6.4-liter V-10 that, in normally-aspirated trim, puts out 605 horsepower and 501 lb-feet of torque through the car's 19-inch rear wheels. That's enough to launch it from 0-60 in under 10 seconds and deliver an ungoverned top speed of 190 mph.
If that's not enough, a supercharger could "easily hit 700" hp, according to advanced product chief Chris Theodore. Like its crosstown competitors, Ford officials insisted that their new supercar is "just a concept," but they didn't work very hard to convince the crowd. "We built the Ford GT a year after we showed the concept," conceded Mays, and we built the Mustang a year after we showed you that concept. You do the math. How much would a product Cobra add up to? Definitely less than the $139,000 Ford GT, and more likely in line with the Dodge Viper, in the $80,000 to $90,000 range, it appears. In production, Ford would likely add roll-up windows and a very basic, removable soft-top.
Source: The Car Connection
#19
Senior Moderator
Shelby 2004 Cobra...
Vroom vroom...![Smile](https://acurazine.com/forums/images/smilies/smile.gif)
===================
Shelby Cobra Concept Vehicle
![](http://www.rsportscars.com/foto/06/shelby04_01.jpg)
![](http://www.rsportscars.com/foto/06/shelby04_02_800.jpg)
![](http://www.rsportscars.com/foto/06/shelby04_03_800.jpg)
![](http://www.rsportscars.com/foto/06/shelby04_05.jpg)
![](http://www.rsportscars.com/foto/06/shelby04_04.jpg)
![](http://www.rsportscars.com/foto/06/shelby04_06.jpg)
![](http://www.rsportscars.com/foto/06/shelby04_07.jpg)
The new Ford Shelby Cobra concept marks the latest step in an exciting evolution of Ford concept vehicles, with an evocative design, bonafide performance credentials and – thanks to engineering as nimble and efficient as a sports car – a level of feasibility that is already close to production-level.
The Ford Shelby Cobra concept team drew heavily on the Ford GT production car – especially the space frame and suspension – to maximize efficiencies. Although the cars have vastly different characters and different dimensions, smart engineering quickly adapted the rear-mid-engine Ford GT platform to this front-mid-engine application.
Inspired by the biggest, baddest Cobra of all – the renowned 427 – Ford engineers created a new aluminum-block V-10 to power the Ford Shelby Cobra concept. This 6.4-liter engine, adapted from Ford’s MOD family, delivers the rush of raw power associated with that big 1960s V-8 monster – with 605 horsepower and 501 foot-pounds of torque – without the aid of supercharging or turbocharging.
This combination of brute force and thorough engineering has created a rarity in the world of auto shows – a concept car that can actually do, rather than merely promise, zero to 60 in under four seconds, and would easily exceed 100 mph if not electronically limited. With show cars typically limited to a stately 15 mph or so, this fact points at the level of engineering packed into the Ford Shelby Cobra concept – and points to the authenticity that comes from working with Carroll Shelby once again.
"I'm sure the question on everyone’s mind at this point is, ‘Are you going to build a production version?’ The answer is, ‘We'll see.’ If we get the same overwhelming reaction to the Cobra concept as we did to the GT concept, anything is possible," said J Mays, group vice president, Design.
[b]Evocative, Modern Design[b]
First and foremost, the Ford Shelby Cobra concept is a performance car, and every surface and line has its roots in the car’s engineering mettle.
"The powertrain, the space frame and the suspension were all key elements in the design, although for the most part, you don’t see them," said Richard Hutting, chief designer. "These established our proportions and naturally led to a race-bred shape that evokes the original Shelby Cobra, without sharing a single dimension or proportion. Just like its underpinnings, this car is thoroughly modern in every way."
While the design is clearly 21st century, the roadster is intentionally familiar. Key details – the dominant grille opening, hood scoop, vertical bumper bars and stacked lamps front and rear – establish the historical connection to Shelby’s original creation.
The Ford Shelby Cobra concept completes the trilogy of Ford’s greatest performance vehicles: the GT40, Mustang and Shelby Cobra. It heralds a new era of speed from Ford, the company that best knows and most loves performance cars.
"Our original objective was to build a sports car that would outrun Corvette," Shelby said. "I never dreamed it would become the icon that it did."
[b]Technical Specifications:[b]
Engine
Type: V10
Displacement cu in (cc): 390 (6392)
Power bhp (kW) at RPM: 605(445) / 6750
Torque lb-ft (Nm) at RPM: 501(679) / 5500
Redline at RPM: 7500
Brakes & Tires
Brakes F/R: ABS, vented disc/vented disc
Tires F-R: 275/40 R18 - 345/35 R19
Exterior Dimensions & Weight
Length × Width × Height in: 155.4 × 75 × n.a.
Weight lb (kg): 3075 (1396)
Performance
Acceleration 0-62 mph s: n.a.
Top Speed mph (km/h): n.a.
Fuel Economy EPA city/highway mpg (l/100 km): n.a.
![Smile](https://acurazine.com/forums/images/smilies/smile.gif)
===================
Shelby Cobra Concept Vehicle
![](http://www.rsportscars.com/foto/06/shelby04_01.jpg)
![](http://www.rsportscars.com/foto/06/shelby04_02_800.jpg)
![](http://www.rsportscars.com/foto/06/shelby04_03_800.jpg)
![](http://www.rsportscars.com/foto/06/shelby04_05.jpg)
![](http://www.rsportscars.com/foto/06/shelby04_04.jpg)
![](http://www.rsportscars.com/foto/06/shelby04_06.jpg)
![](http://www.rsportscars.com/foto/06/shelby04_07.jpg)
The new Ford Shelby Cobra concept marks the latest step in an exciting evolution of Ford concept vehicles, with an evocative design, bonafide performance credentials and – thanks to engineering as nimble and efficient as a sports car – a level of feasibility that is already close to production-level.
The Ford Shelby Cobra concept team drew heavily on the Ford GT production car – especially the space frame and suspension – to maximize efficiencies. Although the cars have vastly different characters and different dimensions, smart engineering quickly adapted the rear-mid-engine Ford GT platform to this front-mid-engine application.
Inspired by the biggest, baddest Cobra of all – the renowned 427 – Ford engineers created a new aluminum-block V-10 to power the Ford Shelby Cobra concept. This 6.4-liter engine, adapted from Ford’s MOD family, delivers the rush of raw power associated with that big 1960s V-8 monster – with 605 horsepower and 501 foot-pounds of torque – without the aid of supercharging or turbocharging.
This combination of brute force and thorough engineering has created a rarity in the world of auto shows – a concept car that can actually do, rather than merely promise, zero to 60 in under four seconds, and would easily exceed 100 mph if not electronically limited. With show cars typically limited to a stately 15 mph or so, this fact points at the level of engineering packed into the Ford Shelby Cobra concept – and points to the authenticity that comes from working with Carroll Shelby once again.
"I'm sure the question on everyone’s mind at this point is, ‘Are you going to build a production version?’ The answer is, ‘We'll see.’ If we get the same overwhelming reaction to the Cobra concept as we did to the GT concept, anything is possible," said J Mays, group vice president, Design.
[b]Evocative, Modern Design[b]
First and foremost, the Ford Shelby Cobra concept is a performance car, and every surface and line has its roots in the car’s engineering mettle.
"The powertrain, the space frame and the suspension were all key elements in the design, although for the most part, you don’t see them," said Richard Hutting, chief designer. "These established our proportions and naturally led to a race-bred shape that evokes the original Shelby Cobra, without sharing a single dimension or proportion. Just like its underpinnings, this car is thoroughly modern in every way."
While the design is clearly 21st century, the roadster is intentionally familiar. Key details – the dominant grille opening, hood scoop, vertical bumper bars and stacked lamps front and rear – establish the historical connection to Shelby’s original creation.
The Ford Shelby Cobra concept completes the trilogy of Ford’s greatest performance vehicles: the GT40, Mustang and Shelby Cobra. It heralds a new era of speed from Ford, the company that best knows and most loves performance cars.
"Our original objective was to build a sports car that would outrun Corvette," Shelby said. "I never dreamed it would become the icon that it did."
[b]Technical Specifications:[b]
Engine
Type: V10
Displacement cu in (cc): 390 (6392)
Power bhp (kW) at RPM: 605(445) / 6750
Torque lb-ft (Nm) at RPM: 501(679) / 5500
Redline at RPM: 7500
Brakes & Tires
Brakes F/R: ABS, vented disc/vented disc
Tires F-R: 275/40 R18 - 345/35 R19
Exterior Dimensions & Weight
Length × Width × Height in: 155.4 × 75 × n.a.
Weight lb (kg): 3075 (1396)
Performance
Acceleration 0-62 mph s: n.a.
Top Speed mph (km/h): n.a.
Fuel Economy EPA city/highway mpg (l/100 km): n.a.
#20
Senior Moderator
Shelby 2004 Cobra...
Vroom vroom...![Smile](https://acurazine.com/forums/images/smilies/smile.gif)
===================
Shelby Cobra Concept Vehicle
![](http://www.rsportscars.com/foto/06/shelby04_01.jpg)
![](http://www.rsportscars.com/foto/06/shelby04_02_800.jpg)
![](http://www.rsportscars.com/foto/06/shelby04_03_800.jpg)
![](http://www.rsportscars.com/foto/06/shelby04_05.jpg)
![](http://www.rsportscars.com/foto/06/shelby04_04.jpg)
![](http://www.rsportscars.com/foto/06/shelby04_06.jpg)
![](http://www.rsportscars.com/foto/06/shelby04_07.jpg)
The new Ford Shelby Cobra concept marks the latest step in an exciting evolution of Ford concept vehicles, with an evocative design, bonafide performance credentials and – thanks to engineering as nimble and efficient as a sports car – a level of feasibility that is already close to production-level.
The Ford Shelby Cobra concept team drew heavily on the Ford GT production car – especially the space frame and suspension – to maximize efficiencies. Although the cars have vastly different characters and different dimensions, smart engineering quickly adapted the rear-mid-engine Ford GT platform to this front-mid-engine application.
Inspired by the biggest, baddest Cobra of all – the renowned 427 – Ford engineers created a new aluminum-block V-10 to power the Ford Shelby Cobra concept. This 6.4-liter engine, adapted from Ford’s MOD family, delivers the rush of raw power associated with that big 1960s V-8 monster – with 605 horsepower and 501 foot-pounds of torque – without the aid of supercharging or turbocharging.
This combination of brute force and thorough engineering has created a rarity in the world of auto shows – a concept car that can actually do, rather than merely promise, zero to 60 in under four seconds, and would easily exceed 100 mph if not electronically limited. With show cars typically limited to a stately 15 mph or so, this fact points at the level of engineering packed into the Ford Shelby Cobra concept – and points to the authenticity that comes from working with Carroll Shelby once again.
"I'm sure the question on everyone’s mind at this point is, ‘Are you going to build a production version?’ The answer is, ‘We'll see.’ If we get the same overwhelming reaction to the Cobra concept as we did to the GT concept, anything is possible," said J Mays, group vice president, Design.
[b]Evocative, Modern Design[b]
First and foremost, the Ford Shelby Cobra concept is a performance car, and every surface and line has its roots in the car’s engineering mettle.
"The powertrain, the space frame and the suspension were all key elements in the design, although for the most part, you don’t see them," said Richard Hutting, chief designer. "These established our proportions and naturally led to a race-bred shape that evokes the original Shelby Cobra, without sharing a single dimension or proportion. Just like its underpinnings, this car is thoroughly modern in every way."
While the design is clearly 21st century, the roadster is intentionally familiar. Key details – the dominant grille opening, hood scoop, vertical bumper bars and stacked lamps front and rear – establish the historical connection to Shelby’s original creation.
The Ford Shelby Cobra concept completes the trilogy of Ford’s greatest performance vehicles: the GT40, Mustang and Shelby Cobra. It heralds a new era of speed from Ford, the company that best knows and most loves performance cars.
"Our original objective was to build a sports car that would outrun Corvette," Shelby said. "I never dreamed it would become the icon that it did."
[b]Technical Specifications:[b]
Engine
Type: V10
Displacement cu in (cc): 390 (6392)
Power bhp (kW) at RPM: 605(445) / 6750
Torque lb-ft (Nm) at RPM: 501(679) / 5500
Redline at RPM: 7500
Brakes & Tires
Brakes F/R: ABS, vented disc/vented disc
Tires F-R: 275/40 R18 - 345/35 R19
Exterior Dimensions & Weight
Length × Width × Height in: 155.4 × 75 × n.a.
Weight lb (kg): 3075 (1396)
Performance
Acceleration 0-62 mph s: n.a.
Top Speed mph (km/h): n.a.
Fuel Economy EPA city/highway mpg (l/100 km): n.a.
![Smile](https://acurazine.com/forums/images/smilies/smile.gif)
===================
Shelby Cobra Concept Vehicle
![](http://www.rsportscars.com/foto/06/shelby04_01.jpg)
![](http://www.rsportscars.com/foto/06/shelby04_02_800.jpg)
![](http://www.rsportscars.com/foto/06/shelby04_03_800.jpg)
![](http://www.rsportscars.com/foto/06/shelby04_05.jpg)
![](http://www.rsportscars.com/foto/06/shelby04_04.jpg)
![](http://www.rsportscars.com/foto/06/shelby04_06.jpg)
![](http://www.rsportscars.com/foto/06/shelby04_07.jpg)
The new Ford Shelby Cobra concept marks the latest step in an exciting evolution of Ford concept vehicles, with an evocative design, bonafide performance credentials and – thanks to engineering as nimble and efficient as a sports car – a level of feasibility that is already close to production-level.
The Ford Shelby Cobra concept team drew heavily on the Ford GT production car – especially the space frame and suspension – to maximize efficiencies. Although the cars have vastly different characters and different dimensions, smart engineering quickly adapted the rear-mid-engine Ford GT platform to this front-mid-engine application.
Inspired by the biggest, baddest Cobra of all – the renowned 427 – Ford engineers created a new aluminum-block V-10 to power the Ford Shelby Cobra concept. This 6.4-liter engine, adapted from Ford’s MOD family, delivers the rush of raw power associated with that big 1960s V-8 monster – with 605 horsepower and 501 foot-pounds of torque – without the aid of supercharging or turbocharging.
This combination of brute force and thorough engineering has created a rarity in the world of auto shows – a concept car that can actually do, rather than merely promise, zero to 60 in under four seconds, and would easily exceed 100 mph if not electronically limited. With show cars typically limited to a stately 15 mph or so, this fact points at the level of engineering packed into the Ford Shelby Cobra concept – and points to the authenticity that comes from working with Carroll Shelby once again.
"I'm sure the question on everyone’s mind at this point is, ‘Are you going to build a production version?’ The answer is, ‘We'll see.’ If we get the same overwhelming reaction to the Cobra concept as we did to the GT concept, anything is possible," said J Mays, group vice president, Design.
[b]Evocative, Modern Design[b]
First and foremost, the Ford Shelby Cobra concept is a performance car, and every surface and line has its roots in the car’s engineering mettle.
"The powertrain, the space frame and the suspension were all key elements in the design, although for the most part, you don’t see them," said Richard Hutting, chief designer. "These established our proportions and naturally led to a race-bred shape that evokes the original Shelby Cobra, without sharing a single dimension or proportion. Just like its underpinnings, this car is thoroughly modern in every way."
While the design is clearly 21st century, the roadster is intentionally familiar. Key details – the dominant grille opening, hood scoop, vertical bumper bars and stacked lamps front and rear – establish the historical connection to Shelby’s original creation.
The Ford Shelby Cobra concept completes the trilogy of Ford’s greatest performance vehicles: the GT40, Mustang and Shelby Cobra. It heralds a new era of speed from Ford, the company that best knows and most loves performance cars.
"Our original objective was to build a sports car that would outrun Corvette," Shelby said. "I never dreamed it would become the icon that it did."
[b]Technical Specifications:[b]
Engine
Type: V10
Displacement cu in (cc): 390 (6392)
Power bhp (kW) at RPM: 605(445) / 6750
Torque lb-ft (Nm) at RPM: 501(679) / 5500
Redline at RPM: 7500
Brakes & Tires
Brakes F/R: ABS, vented disc/vented disc
Tires F-R: 275/40 R18 - 345/35 R19
Exterior Dimensions & Weight
Length × Width × Height in: 155.4 × 75 × n.a.
Weight lb (kg): 3075 (1396)
Performance
Acceleration 0-62 mph s: n.a.
Top Speed mph (km/h): n.a.
Fuel Economy EPA city/highway mpg (l/100 km): n.a.
#27
Senior Moderator
What's the going price of the Shelby Cobra right now?
#28
Senior Moderator
What's the going price of the Shelby Cobra right now?
#31
Suzuka Master
Join Date: Jun 2001
Location: Los Angeles, CA
Age: 45
Posts: 7,083
Likes: 0
Received 0 Likes
on
0 Posts
But the reborn roadster does boast a 6.4-liter V-10 that, in normally-aspirated trim, puts out 605 horsepower and 501 lb-feet of torque through the car's 19-inch rear wheels. That's enough to launch it from 0-60 in under 10 seconds
#32
Suzuka Master
Join Date: Jun 2001
Location: Los Angeles, CA
Age: 45
Posts: 7,083
Likes: 0
Received 0 Likes
on
0 Posts
But the reborn roadster does boast a 6.4-liter V-10 that, in normally-aspirated trim, puts out 605 horsepower and 501 lb-feet of torque through the car's 19-inch rear wheels. That's enough to launch it from 0-60 in under 10 seconds