HAMANN-Motorsport, the renowned specialist for exquisite refinements of BMW-automobiles shows its latest developments on the 80th Geneva Motor Show. The masculine show-piece on the HAMANN exhibition stand with 200 square metres is the world premiere of the 670 hp/493kW strong and 300 km/h fast TYCOON EVO M based on the BMW X6 M.

The TYCOON EVO M – powerful appearance with striking design

Already the shape of the TYCOON EVO M with its impressive broad built gives a good hint of what is to be discovered. Mainly responsible for that are the front and the rear wing extensions made of light composite materials. These let the body expand by impressive 60 millimetres. Additionally, the HAMANN designers enhanced the sides with the newly designed side skirts. The distinctive hallmark of the front is the apron with the four striking LED daytime running lights. But the body set does not only emphasise the appearance, enlarged air inlets in the front and the carbon bonnet allow an optimised air ventilation of the engine compartment. At the X6 M rear, HAMANN also replaces the original skirt with an own development. This makes room for the earthy sounding sports exhaust system with the centrally positioned double end pipes. The rear view of the TYCOON EVO M is perfected with beautifully designed rear- and roof spoilers. All of those components produce a low-swirling airflow over the vehicle silhouette and render additional downthrust.

Rich performance enhancement thanks to optimised exhaust gas flow

In addition to the spectacular shape of the TYCOON EVO M the HAMANN engine department added a powerful performance enhancement for the serial engine. The most significant component for the performance enhancement and responsible for the dynamic and earthy sound of the TYCOON EVO M is the stainless steel high performance exhaust system with metal catalysers. A newly programmed map for the serial motronic completes the upgrade and suspending the speed limit of 250 km/h allows unrestrained driving pleasures.

As a result of the modifications, the X6 M now offers 670 hp / 493 kW at 6,000 r.p.m. and 780 Nm torque at 1,500 – 5,650 r.p.m. This is a surplus of 115 hp and 100 Nm compared to the serial version. Therefore, the all-wheel accelerated from 0 to 100 in only 4.2 seconds and reaches a maximum speed of 300 km/h.

Varying rim designs and sizes

Specially adjusted to the increased requirements of the TYCOON EVO M, the refining specialist presents varying wheel designs and sizes. A highlight concerning styling and technology is the rim model UNIQUE FORGED ANODIZED produced in most modern forged technology. The dynamic shape of the delicate, anodised cross spokes does not only lead to a dynamic and striking look, but also results in an even weight distribution and therefore guarantees higher bearing loads. HAMANN offers the 23-inch wheel in the dimensions 11.0 x 23 at the front- and 12.0 x 23 at the rear axle, combined with wheels measuring 315/25 R 23.

The light alloy wheels are especially emphasised with the HAMANN lowering kit. Progressively coiled springs at the front axle and a modification kit for the rear axle thereby lower the centre of gravity of the Sports Utility Vehicle by approx. 40 millimetres.

Most noble interior applications underline the motor sports atmosphere

In addition to the existing factory-provided interior, HAMANN offers accessories made of black-anodised aluminium in combination with carbon applications. Pedals and foot rest render motor sports air and perfectly match the 12-part HAMANN decoration set made of carbon fibre. An three-spoke sports steering wheel additionally render the TYCOON EVO M a dynamic overall appearance. For the luggage compartment in the back of the X6 M, HAMANN offers an elegant and practical boot mat with diamond-shaped decorations and an embroidered logo.

HAMANN-Motorsport, the renowned specialist for exquisite BMW refinements, shows the BMW X6 M at the 64th International Motor Show in Frankfurt. The masculine show piece on the HAMANN both in Hall 5 is the TYCOON EVO M based on the BMW X6 M with 670 hp / 493 kW and a top speed of 300 km/h.

The TYCOON EVO M – in special paint “gunmetal”

Looking at the TYCOON EVO M and its broad built shape whets one´s appetite. Especially the front mudguards and the rear extensions made of light component material contribute to this feeling. The car body is widened by an amazing 60 millimetres. Additionally, the HAMANN designers replace the sides with newly designed side skirts. An unmistakable hallmark of the front is the apron with four striking LED daylight running lights. The car body kit does not only enhance the look of the car, its enlarged air inlets the front and the carbon bonnet also provide an optimized air supply to the engine compartment. At the back of the X6 M, HAMANN replaces the original apron with a new own development which provides spaces for the earthy sounds produced by the sports exhaust system with centre double end pipes. Also new within the refining programme are rear lights with LED technology. The back of the TYCOON EVO M is perfected with shapely rear- and roof spoilers. All those components render a low-swirl air flow over the car silhouette and provide additional downforce.

Extensive performance plus thanks to optimised exhaust gas stream

In addition to the spectacular appearance of the TYCOON EVO M, the HAMANN engine department developed a powerful performance enhancement for the serial engine. The most important part for the power increase is the titanium high-performance exhaust system with catalyst replacement pipes which also renders a dynamic and earthy sound. A newly programmed engine map perfects the upgrade and owing to the removal of the 250km/h speed limit, the driver now has an unlimited driving experience.

Resulting from the modifications, the X6 M now has 670 hp / 493 kW at 6,000 r.p.m. and 950 Newton metres torque at 1,500 – 5,650 r.p.m. These are additional 115 hp and 100 Newton metres compared to the serial version. Therefore, the 4WD automobile accelerates from 0 to 100 km/h in only 4.2 seconds and reaches a top speed of 300 km/h.

Varying rim designs and sizes

Especially designed for the increased requirements of the TYCOON EVO M, the automobile refiner presents varying wheel designs and sizes. The style- and technology highlight is the most modern rim model UNIQUE FORGED GUNMETAL. The dynamic shape of the delicate, anodized cross spokes does not only render a dynamic and striking look, but also an even share of weight and therefore ensures higher bearing loads. HAMANN offers the 23 inch wheel in 11.0 x 23 at the front axle and 12.0 x 23 at the rear axle with tyres sized 315/25 R 23.

The HAMANN lowering kit further enhances the light alloy rims. Progressively coiled springs at the front axle and a refining kit for the rear axle lower the SAV´s centre of gravity by approximately 40 millimetres.

MOV´IT provides optimal deceleration

Especially for HAMANN, MOV´IT developed a CERAMIC high performance braking system which stands out by its orange coloured brake callipers. Now, 6 piston calipers in connection with brake discs sized 420 x 40 millimetres at the front axle and 4 piston calipers with brake discs measuring 380 x 32 millimetres at the rear axle render optimal deceleration and a perfect control of the gas pedal.

Exotic interior applications made of nanai salmon leather

In addition to the serial interior, HAMANN offers applications made of selected leather. The HAMANN upholstery department refine the floor space with noble chequer-shaped embroideries on the leather. Pedals and foot rests made of aluminium render motor sports flair and perfectly match with the illuminated door protection sills. A three-spoke sports steering wheel adds further dynamics to the overall impression of the TYCOON EVO M interior. For the X6 boot, HAMANN offers a tasteful and practical boot mat with chequer-shaped embroideries and a stitched logo.