A TSX Harness and life update
02-14-2009, 03:24 PM
#1
A TSX Harness and life update
I have received a lot of PMs and email lately about the TSX harness and wanted to give an update on what has been happening the last few months. Don’t worry, as of right now more harnesses are coming.
Last spring my HD failed and I lost all of my wiring diagrams, schematics and PCB layouts, this included the BALUN and the TSX connector. At the time interest in the harness was way down so I did not bother to draw up new artwork. Towards the end of the summer I had a few requests so I set out to do a new connector but I had a lot on my plate like going to Italy for my daughters wedding, that I figured it could wait until I got back in October. Well while I was in Italy my brother passed away from complications of Diabetes and this really shut me down. I figured at this point I would just get through the holidays and then get back at it. Well during the holidays my sister got hospitalized because of her Diabetes and she also passed away last week. My brother was 63 and my sister was 62, a few years back I lost another brother, only 50 from Diabetes. Diabetes sucks.
I am working on new connector art work now and should have it finished in a few days; one of my goals is to make it easier to assemble then the old design. I appreciate everyone’s patience and I figure it will be about three weeks before the new harness is ready.
Thanks
Jeff
Last spring my HD failed and I lost all of my wiring diagrams, schematics and PCB layouts, this included the BALUN and the TSX connector. At the time interest in the harness was way down so I did not bother to draw up new artwork. Towards the end of the summer I had a few requests so I set out to do a new connector but I had a lot on my plate like going to Italy for my daughters wedding, that I figured it could wait until I got back in October. Well while I was in Italy my brother passed away from complications of Diabetes and this really shut me down. I figured at this point I would just get through the holidays and then get back at it. Well during the holidays my sister got hospitalized because of her Diabetes and she also passed away last week. My brother was 63 and my sister was 62, a few years back I lost another brother, only 50 from Diabetes. Diabetes sucks.
I am working on new connector art work now and should have it finished in a few days; one of my goals is to make it easier to assemble then the old design. I appreciate everyone’s patience and I figure it will be about three weeks before the new harness is ready.
Thanks
Jeff
02-14-2009, 08:37 PM
#2
Hey Jeff. I'm sorry to hear about your latest loss. My thoughts and prayers are with you and your family. I totally know where you're coming from though, my father has diabetes and is currently in the hospital for his blood sugar levels. I echo your sentiment in that diabetes does suck.
Like I've mentioned in a previous PM with you, I think its a great thing that you're still up to making harnesses for all of us and I look forward to when they'll be available. Thanks for keeping us updated. Take it easy.
- John
Like I've mentioned in a previous PM with you, I think its a great thing that you're still up to making harnesses for all of us and I look forward to when they'll be available. Thanks for keeping us updated. Take it easy.
- John
02-14-2009, 11:03 PM
#4
Moderator
Regional Coordinator (Southeast)
Regional Coordinator (Southeast)
Join Date: Dec 2003
Location: Mooresville, NC
Age: 38
Posts: 43,638
Received 3,858 Likes
on
2,579 Posts
Jeff sorry to hear about your family's losses. I have a couple questions regarding the harness as I am currently in the process of trying to make my own harness from your previous posts. I have come up with a possible new way to implement the harness as well.
Regarding the shielding wire. What is the purpose of the shielding wire as it actually connects to nothing on either end of the harness.
Please PM me or email me regarding the new way to connect the harness if you are interested.
Regarding the shielding wire. What is the purpose of the shielding wire as it actually connects to nothing on either end of the harness.
Please PM me or email me regarding the new way to connect the harness if you are interested.
02-16-2009, 10:31 AM
#5
10th Gear
iTrader: (1)
Join Date: Nov 2008
Location: Tucson, AZ
Age: 43
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Wow man...sorry about your losses. I feel your pain though, my fiance's family is riddled with diabetes and mine with cancer...so that sort of stuff is always harder to hear.
Trending Topics
02-16-2009, 03:34 PM
#8
Instructor
Join Date: Apr 2004
Location: Washington,DC
Posts: 142
Likes: 0
Received 0 Likes
on
0 Posts
Welcome back Jeff...
I'm so sorry to hear about your losses and I hope in your quieter moments you can reflect on all the good times you guys had....you still have good days ahead of you
I'm so sorry to hear about your losses and I hope in your quieter moments you can reflect on all the good times you guys had....you still have good days ahead of you
02-16-2009, 06:38 PM
#9
Moderator
Regional Coordinator (Southeast)
Regional Coordinator (Southeast)
Join Date: Dec 2003
Location: Mooresville, NC
Age: 38
Posts: 43,638
Received 3,858 Likes
on
2,579 Posts
02-18-2009, 11:19 PM
#10
Moderator
Regional Coordinator (Southeast)
Regional Coordinator (Southeast)
Join Date: Dec 2003
Location: Mooresville, NC
Age: 38
Posts: 43,638
Received 3,858 Likes
on
2,579 Posts
hope to hear from you soon regarding the shielding wire
02-20-2009, 05:54 PM
#11
First off, thanks to everyone for your kind words and support,
Second, I completed the art work and sent it off and have ordered the RCA connectors. I should have everything by the end of next week. I only have enough cable to build 5 harnesses, Please PM me with a definite “Yes” if you want a harness so I will know if I have to order more cable.
I will have harnesses by the first week of March.
Thanks again
Jeff
Second, I completed the art work and sent it off and have ordered the RCA connectors. I should have everything by the end of next week. I only have enough cable to build 5 harnesses, Please PM me with a definite “Yes” if you want a harness so I will know if I have to order more cable.
I will have harnesses by the first week of March.
Thanks again
Jeff
02-23-2009, 10:16 AM
#13
Moderator
Regional Coordinator (Southeast)
Regional Coordinator (Southeast)
Join Date: Dec 2003
Location: Mooresville, NC
Age: 38
Posts: 43,638
Received 3,858 Likes
on
2,579 Posts
what changes are you making in this harness compared to the last. In posts I was reading about a version 2 of the first harness your were making. What did that include that the first one did not include.
03-03-2009, 03:23 PM
#17
Jeff
03-04-2009, 12:28 AM
#18
Harness Purchase
Hello Mercman,
I'd like to purchase one of your harnesses form my TSX. If you could please email me at pgapeles@msn.com with your price and payment requirements. Hope to hear from you soon. Thank You!
Patrick
I'd like to purchase one of your harnesses form my TSX. If you could please email me at pgapeles@msn.com with your price and payment requirements. Hope to hear from you soon. Thank You!
Patrick
05-04-2009, 01:10 PM
#21
Moderator
Regional Coordinator (Southeast)
Regional Coordinator (Southeast)
Join Date: Dec 2003
Location: Mooresville, NC
Age: 38
Posts: 43,638
Received 3,858 Likes
on
2,579 Posts
so whats going on with this second batch of harnesses
05-05-2009, 08:12 AM
#23
Thanks Jonesi !
I picked up an 09 Tech package an I have already started to work on upgrading the amp and speakers. I have info on the Premium system (Base TSX) and will be working on an amp upgrade of it as well.
I have harnesses ready and interface converters (BALUN) parts on hand for anyone who is in need.
Jeff
I picked up an 09 Tech package an I have already started to work on upgrading the amp and speakers. I have info on the Premium system (Base TSX) and will be working on an amp upgrade of it as well.
I have harnesses ready and interface converters (BALUN) parts on hand for anyone who is in need.
Jeff
06-29-2009, 06:34 PM
#25
5th Gear
Join Date: May 2009
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Harness and converter purchase
Hi Mercman,
I have an 06 TSX and I'm interested in purchasing a harness and interface converter from you so I can replace my factory amp. Do you have any available? My email address is terp5-va@yahoo.com. I hope all is well with you.
Thanks,
Peter
09-23-2009, 01:34 AM
#27
Advanced
Join Date: Sep 2009
Location: Arizona
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
How much for a cable? email me at lucas_hover@hotmail.com
10-11-2009, 07:14 PM
#30
9th Gear
Join Date: Oct 2009
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
hye mercman, im also interested in a harness and balun for an 05 TSX w/nav ,please email me at apasha1981@gmail.com with the pricing and stuff when you can.
- Thanks and God bless
- Thanks and God bless
10-25-2009, 08:10 PM
#31
Hey! I am also interested in purchasing a harness for my '06 TSX. Please let me know how much one would cost. Also, how much would a Balun cost? You can reach me at theaznboywunder(at)aim.com Thank you very much!
10-28-2009, 03:44 PM
#32
just want to pipe in, i purchased a BALUN for my 06tsx and my alpine pdx amps maybe 2 years ago.
Stereo system still going strong
(batteries on the other hand...lol)
edit: in case it wasnt obvious, i meant i purchased a BALUN from Mercman lol.
Stereo system still going strong
(batteries on the other hand...lol)edit: in case it wasnt obvious, i meant i purchased a BALUN from Mercman lol.
11-10-2009, 06:39 PM
#39
Yes I did some big time research on the tech system but have not been able to come up with a solution yet. I know what I have to do but can not invest the time to do it.
The base or premium system should be no problem and I just need to get one to measure the signal levels. I’m redesigning the interface converter (BALUN) to include the extra sub channel.
Thanks jiggaman, I understand that it is the most complicated joint in the body. I’m using the same surgeon that fixed my right shoulder and my knee so I’m not too worried.
Jeff
The base or premium system should be no problem and I just need to get one to measure the signal levels. I’m redesigning the interface converter (BALUN) to include the extra sub channel.
Jeff
