Has anyone ever try to mod the memory option to control the pass seat? Im 5'11 so my seat is pretty far back and reclined. I dont know if this is normal but I also like to have my pass seat set to the same position. It usually is until i have 3 or more people in it. Im getting sick and tired of leaning over to adjust the pass seat from being almost straight up and moved foward.
Well im going to atempt this mod tomorrow... Just because i have nothing else better to do with my time Since im the only one that drives my car i might make memory 2 operate it or just run it off on mem 1. This shouldn't be to hard to do

 

Seems more complicated then it seems, but tell us how it turns out.

 

Good luck!

 

kinda sounds crazy, but its all good. u really cant drive without both seats being equally the same tilt and stuff?

 

Its not so much that the seats aren't equally tilted. Its that the pass seat always seems to moved foward alot and the back of the seat is up and down. Since my seat is almost all the way back /w a slight tilt when i look over im looking at the seat.

As for the mod, I still havent pulled out drivers seat. I studied the wiring diagram and it looks like im going to have to get some sensors.

 

Man good luck..sounds like a b*tch to do.

 

how are u going to solve the problem that the pass side is 6 way and the driver side is 8 way

 

im not to concerned about the 8way since I dont touch that adjustment. All im looking to do is hit the memory button and send the pass seat all the way back and tilt _/

 

i like the idea. im always doing that myself(leaning over and moving the seat back) let us know how it turns out

 

I was thinkin about doin that a while ago but I can't find anyone who would do it for me. I was thinkin of replacing the 6 way passenger seat to the 8 way driver seat with the memory pannel. I also havent found a salvaged or junked TL-S. Oh well. Good luck with you mod. Tell us how it turns out.