Oregon Members Check In!!
#42
I Quit
ok, I have some stuff that I'd like to make availiable to the Oregon members for local pick up.
Alpine 12" Type R Sub in Alpine box made for the Type R, an Alpine 600 watt mono channel amp and wires, including power wire with fuse. Came from my MDX, so plenty of wire for the TSX. If any of you are interested PM me!
Alpine 12" Type R Sub in Alpine box made for the Type R, an Alpine 600 watt mono channel amp and wires, including power wire with fuse. Came from my MDX, so plenty of wire for the TSX. If any of you are interested PM me!
#44
Originally Posted by ruffellprefley
mink, make sure to post up some pictures of the new ride!
i'll do that maybe tomorrow. i still have my tsx till tuesday for parting out. so i'm trying to take picture of my TL and TSX before returning it to dealer. been busy with work and parting out stuffs i can from home.
#46
#51
im contemplating whether to spend 245 for the tint alone or put in the extra 255 for the mole skin to prevent scratches... if I DO decide to blow 500 on tint, then I'll first get myself the wing spoiler.
By the way mink... you have really heavy tint on your car don't you? can you comfortably see outside your windshield at night and various weathers?
By the way mink... you have really heavy tint on your car don't you? can you comfortably see outside your windshield at night and various weathers?
#52
Originally Posted by Zyuan10
im contemplating whether to spend 245 for the tint alone or put in the extra 255 for the mole skin to prevent scratches... if I DO decide to blow 500 on tint, then I'll first get myself the wing spoiler.
By the way mink... you have really heavy tint on your car don't you? can you comfortably see outside your windshield at night and various weathers?
By the way mink... you have really heavy tint on your car don't you? can you comfortably see outside your windshield at night and various weathers?
i had the same tint for my two other previous cars. i'm really used to it. i got lighter tint for my new tl. 35% carbon. $245 for tinting is really expensive these days. with increased competition they got really cheap.
#53
dang... I should really really really looked over the directions more before heading out to somewhere I don't know.
I tried looking for you guys and Speed Concept but I couldn't see it after some time of driving pass Chevy and entering Aloha (or maybe I DIDN'T drive far enough). I turned around at Aloha's mickey D because it was time to go to work haha. It would've been a lot faster and I would've had more time but traffic was hideous
I was screwed even more because i forgot my cell phone
So how goes the installation?
I tried looking for you guys and Speed Concept but I couldn't see it after some time of driving pass Chevy and entering Aloha (or maybe I DIDN'T drive far enough). I turned around at Aloha's mickey D because it was time to go to work haha. It would've been a lot faster and I would've had more time but traffic was hideous
![Yuck](https://acurazine.com/forums/images/smilies/yuck.gif)
I was screwed even more because i forgot my cell phone
![Why Me](https://acurazine.com/forums/images/smilies/whyme.gif)
So how goes the installation?
Last edited by Zyuan10; 06-01-2007 at 04:46 PM.
#54
Originally Posted by Zyuan10
dang... I should really really really looked over the directions more before heading out to somewhere I don't know.
I tried looking for you guys and Speed Concept but I couldn't see it after some time of driving pass Chevy and entering Aloha (or maybe I DIDN'T drive far enough). I turned around at Aloha's mickey D because it was time to go to work haha. It would've been a lot faster and I would've had more time but traffic was hideous
I was screwed even more because i forgot my cell phone
So how goes the installation?
I tried looking for you guys and Speed Concept but I couldn't see it after some time of driving pass Chevy and entering Aloha (or maybe I DIDN'T drive far enough). I turned around at Aloha's mickey D because it was time to go to work haha. It would've been a lot faster and I would've had more time but traffic was hideous
![Yuck](https://acurazine.com/forums/images/smilies/yuck.gif)
I was screwed even more because i forgot my cell phone
![Why Me](https://acurazine.com/forums/images/smilies/whyme.gif)
So how goes the installation?
its way past that carr chevy.. its two lights away from the McD you turned around.
#55
I Quit
I'm getting rid of my Injen SP1431 Intake so I want to give local members dibs before its posted in the BM.
Specs:
Black finish
SRI - CAI convertable, comes with extension for CAI
CAI extension never used
No scratches, peels, bubbles, or blisters on the black finish
Filter was just cleaned.
Anyways I'll give you guys 3 days dibs, if I get nothing then I'll put in the BM.
PM me for pricing, I don't think I can post prices in the meet section.
Specs:
Black finish
SRI - CAI convertable, comes with extension for CAI
CAI extension never used
No scratches, peels, bubbles, or blisters on the black finish
Filter was just cleaned.
Anyways I'll give you guys 3 days dibs, if I get nothing then I'll put in the BM.
PM me for pricing, I don't think I can post prices in the meet section.
#64
Nikon Neck Beard Krew
iTrader: (5)
Join Date: Mar 2007
Location: Clack-Attack, OR.
Age: 38
Posts: 1,922
Likes: 0
Received 5 Likes
on
5 Posts
Alright everyone, im no longer in Texas. Gonna be stationed at Ft. Lewis Wa. but i call Portland home. Made the trip without any large incedents...cracked window from a rock but that is all. Sucks i got to pay almost 600$ and have nothing "cool" to show for it. Got my wheels re-powder coated a couple days ago...so im whoring pics. Hope to see some of your rides on the streets.
![](http://i12.photobucket.com/albums/a226/rustyspikes/DSC00782small.jpg)
![](http://i12.photobucket.com/albums/a226/rustyspikes/DSC00782small.jpg)
![](http://i12.photobucket.com/albums/a226/rustyspikes/DSC00779small.jpg)
#65
My modding started again. Damn it!!
Ordered so far...
- Carbon Fiber rear window lip spoiler
- Tein H-Tech springs
- Progress rear sway bar
- Nokya Hyper Yellow H8 (Fogs)
- OEM Carbon Fiber interior trims
- OEM All Season mats (Not actually a mod)
Planning to order
- Full A-Spec bodykit
![Tomato](https://acurazine.com/forums/images/smilies/tomato.gif)
![Tomato](https://acurazine.com/forums/images/smilies/tomato.gif)
Ordered so far...
- Carbon Fiber rear window lip spoiler
- Tein H-Tech springs
- Progress rear sway bar
- Nokya Hyper Yellow H8 (Fogs)
- OEM Carbon Fiber interior trims
- OEM All Season mats (Not actually a mod)
Planning to order
- Full A-Spec bodykit
#66
I Quit
Originally Posted by minkl81
My modding started again. Damn it!!
Ordered so far...
- Carbon Fiber rear window lip spoiler
- Tein H-Tech springs
- Progress rear sway bar
- Nokya Hyper Yellow H8 (Fogs)
- OEM Carbon Fiber interior trims
- OEM All Season mats (Not actually a mod)
Planning to order
- Full A-Spec bodykit
![Tomato](https://acurazine.com/forums/images/smilies/tomato.gif)
![Tomato](https://acurazine.com/forums/images/smilies/tomato.gif)
Ordered so far...
- Carbon Fiber rear window lip spoiler
- Tein H-Tech springs
- Progress rear sway bar
- Nokya Hyper Yellow H8 (Fogs)
- OEM Carbon Fiber interior trims
- OEM All Season mats (Not actually a mod)
Planning to order
- Full A-Spec bodykit
![Tongue](https://acurazine.com/forums/images/smilies/tongue.gif)
#67
Originally Posted by clee109
lol speed concept - "no I don't think I'll do anything to it" HA! ![Tongue](https://acurazine.com/forums/images/smilies/tongue.gif)
![Tongue](https://acurazine.com/forums/images/smilies/tongue.gif)
yea yea.. haha.. but this will be all i'm doing to it. after the the bodykit i'm done for it. but debating between new RonJon lip kit for TL-S vs A-spec. i like the sides and rear of a-spec but front is
![ugh](https://acurazine.com/forums/images/smilies/ugh.gif)
#68
I Quit
wait, you're going with H-techs instead of the S-techs? Don't H-Techs drop the TL less than an inch?? Go with the aspec lips, they are soooooo much cleaner looking IMO. We need to start picking a date to have this meet cause it's getting warm and sunny these days
#69
Burning Brakes
Join Date: May 2006
Location: Portland, OR
Age: 41
Posts: 752
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by minkl81
haha your getting spotted everywhere. wheels/coilovers/blacked out trims makes it stand out from crowd.
ha, i love it. whenever i see a tsx (or any acura, for that matter), i always search for mods done to it. and rarely ever see anything.
Originally Posted by clee109
We need to start picking a date to have this meet cause it's getting warm and sunny these days
#70
Originally Posted by clee109
wait, you're going with H-techs instead of the S-techs? Don't H-Techs drop the TL less than an inch?? Go with the aspec lips, they are soooooo much cleaner looking IMO. We need to start picking a date to have this meet cause it's getting warm and sunny these days
i saw some pictures of H-tech drops and its pretty decent. they actually drop more than stated. some got more than a inch drop from h-tech.
i've been waiting close to two weeks for cf rear window lip and now they tell me its not in stock. didn't even notify me until i emailed them.. freaks..
#72
Originally Posted by clee109
was more than an inch on stock dampers? or adj. dampers? Bummer on the CF lip, where did you order it from?
stock shocks. aftermarket shocks aren't much needed since its a inch drop. cf roof lip was from ebay. got money refunded. ordered from different guy last night but its $10 more...
#73
Nikon Neck Beard Krew
iTrader: (5)
Join Date: Mar 2007
Location: Clack-Attack, OR.
Age: 38
Posts: 1,922
Likes: 0
Received 5 Likes
on
5 Posts
Originally Posted by minkl81
stock shocks. aftermarket shocks aren't much needed since its a inch drop. cf roof lip was from ebay. got money refunded. ordered from different guy last night but its $10 more...
Thats crazy..im asuming you got the same one i did? I was never able to get any kind of email from the guy, but i recieved mine in a week.
Looks really good, and blends well with the black molding on the roof. Cant wait to see it
![Thumbs Up](https://acurazine.com/forums/images/smilies/thumbsup.gif)
#76
Should we drive up to seattle for hondatech meet too? Its on the 14th 2:00pm.
Seems like some are meeting up @ Jantzen Beach around 9:30am and driving up to Seattle for the meet.
https://acurazine.com/forums/acurazine-clubs-meets-15/issaquah-seattle-honda-tech-meet-open-all-makes-models-july-14-2007-a-366604/
Seems like some are meeting up @ Jantzen Beach around 9:30am and driving up to Seattle for the meet.
https://acurazine.com/forums/acurazine-clubs-meets-15/issaquah-seattle-honda-tech-meet-open-all-makes-models-july-14-2007-a-366604/
#78
Alright! let's start thinking up of places to meet up along with setting dates! ![Big Grin](https://acurazine.com/forums/images/smilies/biggrin.gif)
I don't have any suggestion because I don't know Portland that well (see: at all). xD
As long as it's not out in crater lake, I'm happy with any location
![Big Grin](https://acurazine.com/forums/images/smilies/biggrin.gif)
I don't have any suggestion because I don't know Portland that well (see: at all). xD
As long as it's not out in crater lake, I'm happy with any location