Driver 1/2 reprogram problem
Thread Starter
Cruisin'
Joined: Dec 2004
Posts: 17
Likes: 0
Driver 1/2 reprogram problem
according to manual when seat preference is programmed side and rear view mirrors are also suppose to adjust automatically.
My seat adjustment is OK but mirrors don't change.
What am I doing wrong?
Thanks
My seat adjustment is OK but mirrors don't change.
What am I doing wrong?
Thanks
Suzuka Master
Joined: Jun 2008
Posts: 5,564
Likes: 1,093
From: Sugar Land, TX
From the owner's manual:
Driving Position Memory System
You can store two driver’s seat (except for power lumbar) and door mirror positions
with the driving position memory system.
When you unlock and open the driver’s door with a remote transmitter, or keyless
access system, the seat and door mirrors adjust automatically to one of the two
preset positions.
You can store two driver’s seat (except for power lumbar) and door mirror positions
with the driving position memory system.
When you unlock and open the driver’s door with a remote transmitter, or keyless
access system, the seat and door mirrors adjust automatically to one of the two
preset positions.
Last edited by Stew4HD; Apr 9, 2015 at 06:34 AM.
Instructor
Joined: Dec 2007
Posts: 121
Likes: 11
From: East Coast
Try adjusting the mirrors and re-programming your driver 1/2 settings. If that doesn't work dig through vehicle settings to see if something isn't disabled by accident.
Otherwise you might have something wrong, go to dealer.
Thread
Thread Starter
Forum
Replies
Last Post
1fatcrxnem1
3G TL Tires, Wheels & Suspension
22
Jun 1, 2018 01:23 AM
billmcd
ILX
9
Oct 17, 2016 03:33 PM
