Pimpin-TL -- 2012 TL SH-AWD Build thread
#1
Safety Car
Thread Starter
Pimpin-TL -- 2012 TL SH-AWD Build thread
Figured it was time to start a build thread since I am now starting to do stuff to my TL.
I purchased my TL back in May of 2012 and it has been a solid reliable car. It now currently on 03/09/2013 has 7000 miles and soon to go in for it's first service.
When I first got it, I got it tinted with 30% front, and 20% back with a Huber Optic tint and tinted the front windshield with clear film to protect from UV.
The next thing I got was the Body Kit and installed it myself.
Got HIDExtra fogs 6k and headlights 6k. And VLEDs DRL's in 5k.
Since then I haven't done much till now.
I ordered TEIN SS Suspension with EDFC which are here, IGNALLS 2 Piece camber kit for the rear which will be going on the 23rd of this month.
I also started today to BLACK out all the chrome with vinyl I got in. I will no doubt take pictures of that once completed.
On with the pictures and progress.
I purchased my TL back in May of 2012 and it has been a solid reliable car. It now currently on 03/09/2013 has 7000 miles and soon to go in for it's first service.
When I first got it, I got it tinted with 30% front, and 20% back with a Huber Optic tint and tinted the front windshield with clear film to protect from UV.
The next thing I got was the Body Kit and installed it myself.
Got HIDExtra fogs 6k and headlights 6k. And VLEDs DRL's in 5k.
Since then I haven't done much till now.
I ordered TEIN SS Suspension with EDFC which are here, IGNALLS 2 Piece camber kit for the rear which will be going on the 23rd of this month.
I also started today to BLACK out all the chrome with vinyl I got in. I will no doubt take pictures of that once completed.
On with the pictures and progress.
#4
Safety Car
Thread Starter
Here are some more pictures of things I missed AND I finished blacking out the chrome on the roof and doors today with the Matte Vinyl.
The following users liked this post:
pimpin-tl (03-10-2013)
The following users liked this post:
pimpin-tl (03-11-2013)
The following users liked this post:
pimpin-tl (03-11-2013)
The following users liked this post:
pimpin-tl (03-11-2013)
The following users liked this post:
pimpin-tl (03-11-2013)
#11
Team Owner
iTrader: (2)
Join Date: Jan 2008
Location: Kansas City, MO (Overland Park, KS)
Posts: 36,545
Received 6,470 Likes
on
5,162 Posts
Very well done, Pimpin.
The following users liked this post:
pimpin-tl (03-11-2013)
The following users liked this post:
pimpin-tl (03-11-2013)
#13
Safety Car
Thread Starter
#14
Safety Car
Thread Starter
#15
Moderator
iTrader: (3)
Super clean
#17
Safety Car
Thread Starter
TEIN SS w/EDFC installed today. Also 20mm and 25mm spacers. Also Ingalls Toe and Camber rear kit. On for the pics...these were taken during the install and after the install. Inside garage ones were during before we adjusted the coils. Alignment will be done tomorrow.
The following users liked this post:
TLDude876 (03-24-2013)
#18
looks nice! I love those extra fog lights, can you help me find them, so I could order them please
#20
Safety Car
Thread Starter
Thanks Lawn and vtec. Not sure what you are talking about Vtec?
More pics from alignment today.
And how much the car was actually off before getting it done. We eyed the Camber in the rear and damn we got it on perfect.
More pics from alignment today.
And how much the car was actually off before getting it done. We eyed the Camber in the rear and damn we got it on perfect.
#21
Moderator
iTrader: (3)
Damn that looks great!
#23
Team Owner
iTrader: (2)
Join Date: Jan 2008
Location: Kansas City, MO (Overland Park, KS)
Posts: 36,545
Received 6,470 Likes
on
5,162 Posts
Wow, very nice, Pimpin!
The following users liked this post:
pimpin-tl (03-24-2013)
#26
Burning Brakes
Nice tasteful drop. It's perfect. How much did you drop it if you don't mind me asking? And the spacers really enhanced the stance even further! Also, can you take a side shot of the entire car?
Last edited by TeamAcura; 03-24-2013 at 07:57 PM.
#28
Safety Car
Thread Starter
Did you have any issues with the screw tab in the rear where the fender and bumper attach hitting the tires? I may be having issues with that since I already had my lip on the fenders moved out of the way.
I have some on my regular camera I will get online within the next few days.
Last edited by Steven Bell; 03-24-2013 at 10:26 PM. Reason: Merged Posts
#29
Team Owner
iTrader: (2)
Join Date: Jan 2008
Location: Kansas City, MO (Overland Park, KS)
Posts: 36,545
Received 6,470 Likes
on
5,162 Posts
Pimpin, in the lower right hand corner of each post, the middle icon is a Multi-
Quote button. This allows you to respond to more than one person in a single reply. It will look like the Merged Posts above.
Be sure to give it a try-it's much simpler!
Quote button. This allows you to respond to more than one person in a single reply. It will look like the Merged Posts above.
Be sure to give it a try-it's much simpler!
#32
Safety Car
Thread Starter
Thanks.
#33
2012 TL SH-AWD
iTrader: (1)
from the picture your drop is about one finger gap which is how I have mine however I didn't have any issues until now that I've bigger wheels. I shaved over the weekend the rear bracket that holds the bumper and I may need to remove the original bolt and relocate it to hold the bumper and both side.
I have lifetime alignment. . So I can take it back anytime. At least now it drives good. I am considering dropping the back a little more.
Did you have any issues with the screw tab in the rear where the fender and bumper attach hitting the tires? I may be having issues with that since I already had my lip on the fenders moved out of the way.
Not sure what it was stock but we dropped it a lot actually.
I have some on my regular camera I will get online within the next few days.
Did you have any issues with the screw tab in the rear where the fender and bumper attach hitting the tires? I may be having issues with that since I already had my lip on the fenders moved out of the way.
Not sure what it was stock but we dropped it a lot actually.
I have some on my regular camera I will get online within the next few days.
#34
2012 TL SH-AWD
iTrader: (1)
Hi Nakacura, hope pimpin won't mind me posting the link below but I got the wheel adapters from Motorsport tech which their craftmanship and customer service is the best. It took me about 3 weeks to get them.
http://www.motorsport-tech.com/
http://www.motorsport-tech.com/
#35
Safety Car
Thread Starter
from the picture your drop is about one finger gap which is how I have mine however I didn't have any issues until now that I've bigger wheels. I shaved over the weekend the rear bracket that holds the bumper and I may need to remove the original bolt and relocate it to hold the bumper and both side.
Hi Nakacura, hope pimpin won't mind me posting the link below but I got the wheel adapters from Motorsport tech which their craftmanship and customer service is the best. It took me about 3 weeks to get them.
http://www.motorsport-tech.com/
http://www.motorsport-tech.com/
#36
2012 TL SH-AWD
iTrader: (1)
Maybe because you're lowered than me. I had mine one finger gap all around and normally my daughter is the only one seat on the back, and she only weight about 92 pounds. I'm shaving the rear bracket more this Saturday and repainting my rolled fenders on both sides. If you do yours first take pictures and keep us posted.
#38
Safety Car
Thread Starter
Maybe because you're lowered than me. I had mine one finger gap all around and normally my daughter is the only one seat on the back, and she only weight about 92 pounds. I'm shaving the rear bracket more this Saturday and repainting my rolled fenders on both sides. If you do yours first take pictures and keep us posted.