My TL lowered on VIP Modular Wheels VXS 110 and few upgrades.
#842
Chapter Leader (Northeast Florida)
Thread Starter
#843
Chapter Leader (Northeast Florida)
Thread Starter
New page repost of Canibeat feature and shoot of the 4G TL. Here's the link:
http://www.canibeat.com/2012/10/deal...ra-tl-advance/
Some pics from the Canibeat feature running new setup of 20x10.5 wide wheels all around .
http://www.canibeat.com/2012/10/deal...ra-tl-advance/
Some pics from the Canibeat feature running new setup of 20x10.5 wide wheels all around .
Last edited by FYAH TL; 10-11-2012 at 06:58 AM.
The following users liked this post:
ACCURATEin (10-30-2012)
#847
Been working a lot ,haven't really had much time for the car.
I was afraid of ordering the lower teins for the front. Mechanic said i have to be careful to not damage the differential.
#849
Chapter Leader (Northeast Florida)
Thread Starter
Rides the same as the springs that comes with the TEIN SS just make sure to get the 12KG spring rate.
It's the stock grill i just had a local custom body shop paint it that way.
Thanks
What you scared??? Go low or go home. LOL. There's lots of guys in NY with 4G that has made the switch to go lower.
Maybe air suspension will be ideal for you. Now you got me thinking
Thanks and it should be sick on your G. Keep me posted on how it turns out if you decide to get them.
Thanks
Maybe air suspension will be ideal for you. Now you got me thinking
Thanks and it should be sick on your G. Keep me posted on how it turns out if you decide to get them.
#850
Chapter Leader (Northeast Florida)
Thread Starter
Rides the same as the springs that comes with the TEIN SS just make sure to get the 12KG spring rate.
It's the stock grill i just had a local custom body shop paint it that way.
Thanks
What you scared???LOL. There's lots of guys in NY with 4G that has made the switch to go lower.
Maybe air suspension will be ideal for you. Now you got me thinking .
Thanks and it should be sick on your G. Keep me posted on how it turns out if you decide to get them.
Thanks
Maybe air suspension will be ideal for you. Now you got me thinking .
Thanks and it should be sick on your G. Keep me posted on how it turns out if you decide to get them.
#851
#855
Chapter Leader (Northeast Florida)
Thread Starter
LOL.
No rubbing or scraping issues. That's the great thing about coilovers you can easily make height adjustments to fix any ride height issues you encounter.
No rubbing or scraping issues. That's the great thing about coilovers you can easily make height adjustments to fix any ride height issues you encounter.
#856
Team Owner
iTrader: (2)
Join Date: Jan 2008
Location: Kansas City, MO (Overland Park, KS)
Posts: 36,545
Received 6,470 Likes
on
5,162 Posts
Classy looking ride, Fyah.
#860
All,
Page 15 Post#583 of this thread have the info on my new wheels.
I am running 20x9.5 offset +19 in the front and 20x10.5 offset +19 in the rear.
Tires in the front is 235 35 20 and Tires in the rear 245 35 20.
My fenders have been rolled front and rear to clear everything and i have no rubbing issues.
Page 15 Post#583 of this thread have the info on my new wheels.
I am running 20x9.5 offset +19 in the front and 20x10.5 offset +19 in the rear.
Tires in the front is 235 35 20 and Tires in the rear 245 35 20.
My fenders have been rolled front and rear to clear everything and i have no rubbing issues.
#861
Chapter Leader (Northeast Florida)
Thread Starter
Thanks Steven.
Thanks.
The lip clears fine when driving around. Just have to be clear of the curbs when parking.
Thanks.
My offsets will be a bit extreme to you since your car is stock. Mines is not. its fully modded hence why i can run lower offsets. If you look on page 1 of this thread you will see how i started the build on this car with higher offsets and worked my way to lower offsets as i made changes in the build.
There's alot that goes into running low offsets and making it clear. (camber, lowered suspension, tire size, fender work and more).
So Gaza if you want to copy my offsets be prepare to do some work and mods to make it fit. if you don't want to do any mods then get the high offsets that out there for your car.
Thanks.
Thanks.
There's alot that goes into running low offsets and making it clear. (camber, lowered suspension, tire size, fender work and more).
So Gaza if you want to copy my offsets be prepare to do some work and mods to make it fit. if you don't want to do any mods then get the high offsets that out there for your car.
Last edited by FYAH TL; 10-27-2012 at 08:54 AM.
#862
Moderator
Quote:
My offsets will be a bit extreme to you since your car is stock. Mines is not. its fully modded hence why i can run lower offsets. If you look on page 1 of this thread you will see how i started the build on this car with higher offsets and worked my way to lower offsets as i made changes in the build.
There's alot that goes into running low offsets and making it clear. (camber, lowered suspension, tire size, fender work and more).
So Gaza if you want to copy my offsets be prepare to do some work and mods to make it fit. if you don't want to do any mods then get the high offsets that out there for your car.
Originally Posted by Gaza TL
You running +19 offset?seems a bit too extreme. Even with camber they stick out too far. Are u 100% on that?
You running +19 offset?seems a bit too extreme. Even with camber they stick out too far. Are u 100% on that?
There's alot that goes into running low offsets and making it clear. (camber, lowered suspension, tire size, fender work and more).
So Gaza if you want to copy my offsets be prepare to do some work and mods to make it fit. if you don't want to do any mods then get the high offsets that out there for your car.
rolled my fenders and shaved the front..
#863
FYAH-
what does your license plate mean? "008UP"?
love your car. you have too much disposable income! you must be single w/no kids! been there done that....
you have one sweet 4G TL!!
what does your license plate mean? "008UP"?
love your car. you have too much disposable income! you must be single w/no kids! been there done that....
you have one sweet 4G TL!!
#864
Thanks Steven.
Thanks.
The lip clears fine when driving around. Just have to be clear of the curbs when parking.
Thanks.
My offsets will be a bit extreme to you since your car is stock. Mines is not. its fully modded hence why i can run lower offsets. If you look on page 1 of this thread you will see how i started the build on this car with higher offsets and worked my way to lower offsets as i made changes in the build.
There's alot that goes into running low offsets and making it clear. (camber, lowered suspension, tire size, fender work and more).
So Gaza if you want to copy my offsets be prepare to do some work and mods to make it fit. if you don't want to do any mods then get the high offsets that out there for your car.
Thanks.
The lip clears fine when driving around. Just have to be clear of the curbs when parking.
Thanks.
My offsets will be a bit extreme to you since your car is stock. Mines is not. its fully modded hence why i can run lower offsets. If you look on page 1 of this thread you will see how i started the build on this car with higher offsets and worked my way to lower offsets as i made changes in the build.
There's alot that goes into running low offsets and making it clear. (camber, lowered suspension, tire size, fender work and more).
So Gaza if you want to copy my offsets be prepare to do some work and mods to make it fit. if you don't want to do any mods then get the high offsets that out there for your car.
#865
Moderator
that is why you measure.. suspension + fender roll first.. then get rims with that will match your measurements.
ofcourse.. i did it the other way as i couldnt pass up on a $400 set of 3 piece semi-forged wheels.
#866
Chapter Leader (Northeast Florida)
Thread Starter
here's where the money adds up to make it work. Just a quick example...
For you to get the negative camber you"ll need a camber kit.
For you to lower the car to your liking and have control as to how low you want to go you'll need Coilovers or Air suspension.
For you to have fender work done you need an experienced fender work person.
There's other AZ members that has wheels with higher offsets that did not need all that stuff and any fender work and their cars looked great. Its all personal preference. If you want low offset wheels be prepare to do whatever work is needed to make them not stick out to much for your liking.
The following users liked this post:
Gaza TL (10-29-2012)
#869
Moderator
do you mean UAS? cup kits are ok, but they are expensive as hell.. you might as well go with whole air suspension kit as your only a few hundred off from a full air ride..
only company i know that makes good Cup kits are Exotic Air, and i asked them already, their kits dont fit our TL.
they have a asking price of about 700 per bag, then you have to pay for compressor, lines, fittings, control unit. etc.
btw, this is FYAH thread. you can post your build on your own thread.
only company i know that makes good Cup kits are Exotic Air, and i asked them already, their kits dont fit our TL.
they have a asking price of about 700 per bag, then you have to pay for compressor, lines, fittings, control unit. etc.
btw, this is FYAH thread. you can post your build on your own thread.
#870
tehLEGOman
Join Date: Dec 2004
Location: Charlotte, NC
Age: 41
Posts: 9,219
Received 1,983 Likes
on
1,336 Posts
#872
Moderator
i still dont understand why my car looks lower than yours but your wheels are tucking more than mine and i am maxed out on the Tien SS.
#873
Chapter Leader (Northeast Florida)
Thread Starter
^ Tires play a big role in fitment...For example,
Your front tires are size 235 30 20 (overall height for that size tire is around 25.6 inches)
My front tire size is 245 35 20 (overall height for that size tire is around 26.8 inches)
Do the math...both cars maxed out on tein coils but the taller tires on my car will make wheels tuck more than yours.
Your front tires are size 235 30 20 (overall height for that size tire is around 25.6 inches)
My front tire size is 245 35 20 (overall height for that size tire is around 26.8 inches)
Do the math...both cars maxed out on tein coils but the taller tires on my car will make wheels tuck more than yours.
Last edited by FYAH TL; 11-01-2012 at 07:23 PM.
#874
Advanced
iTrader: (1)
Join Date: Nov 2006
Location: Dallas, TX
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
I just read all 22 pages of WIN in this thread. Good God man, your car is gorgeous. This makes me SO glad I bought the CBP SH-AWD. I'm so amazed with your car I don't even know what mod I should do for mine first. You did an excellent job. Hats off to you, sir!
#875
Suzuka Master
iTrader: (3)
http://www.flickr.com/photos/58529986@N05/8198438674/http://www.flickr.com/photos/58529986@N05/8198438674/ by http://www.flickr.com/people/58529986@N05/, on Flickr
http://www.flickr.com/photos/58529986@N05/8197348051/http://www.flickr.com/photos/58529986@N05/8197348051/ by http://www.flickr.com/people/58529986@N05/, on Flickr
http://www.flickr.com/photos/58529986@N05/8198440950/http://www.flickr.com/photos/58529986@N05/8198440950/ by http://www.flickr.com/people/58529986@N05/, on Flickr
http://www.flickr.com/photos/58529986@N05/8198441886/http://www.flickr.com/photos/58529986@N05/8198441886/ by http://www.flickr.com/people/58529986@N05/, on Flickr
http://www.flickr.com/photos/58529986@N05/8197348051/http://www.flickr.com/photos/58529986@N05/8197348051/ by http://www.flickr.com/people/58529986@N05/, on Flickr
http://www.flickr.com/photos/58529986@N05/8198440950/http://www.flickr.com/photos/58529986@N05/8198440950/ by http://www.flickr.com/people/58529986@N05/, on Flickr
http://www.flickr.com/photos/58529986@N05/8198441886/http://www.flickr.com/photos/58529986@N05/8198441886/ by http://www.flickr.com/people/58529986@N05/, on Flickr
#876
Moderator
iTrader: (3)
SO sick. Awesome pictures.
#878
Racer
What's up, FYAH TL? First of all, I would like to say that your car is motivating and inspiring. I know you did the stock RL engine cover several months ago. I was wondering if it was a direct fit onto the TL or did it take a lil something extra to get it to fit properly?
#879
First set of BBK on a 4G TL.
Front is Rotora BBK 6 piston caliper with 14inch 2 piece rotors
Rear is Rotora BBK 4 piston caliper with 14inch 2 piece rotors
Finally got around to getting the BBK installed. Here's some pics
Coming soon...More better pics of the BBK and it's performance.
Front is Rotora BBK 6 piston caliper with 14inch 2 piece rotors
Rear is Rotora BBK 4 piston caliper with 14inch 2 piece rotors
Finally got around to getting the BBK installed. Here's some pics
Coming soon...More better pics of the BBK and it's performance.