Allow me to introduce myself...
#42
Instructor
Thread Starter
that's why they're going on MY car and NOT YOURS, right? I thought they fit nicely when FYAH had them and I think they will fit nicely when we put them on ours...and if I, ME, MYSELF or MY WIFE feel it isn't how we want them to sit...then WE will deal with it then...so, MY taste.
#43
Instructor
iTrader: (2)
Skinny? I think 9" wide is good enough for the TL. They will be flush with the fenders as seen on FYAH and Aspec.
How wide are the wheels you're running?
The nice thing is since they're multi pieces you can change the lip/barrel to change their size. Althrough rebarreling cost as much as buying a new set of wheels.
I'll be calling Logan over at Work tomorrow so I'll see if he remember any specs on your VS-XX.
How wide are the wheels you're running?
that's why they're going on MY car and NOT YOURS, right? I thought they fit nicely when FYAH had them and I think they will fit nicely when we put them on ours...and if I, ME, MYSELF or MY WIFE feel it isn't how we want them to sit...then WE will deal with it then...so, MY taste.
I'll be calling Logan over at Work tomorrow so I'll see if he remember any specs on your VS-XX.
#44
Instructor
Thread Starter
Skinny? I think 9" wide is good enough for the TL. They will be flush with the fenders as seen on FYAH and Aspec.
How wide are the wheels you're running?
The nice thing is since they're multi pieces you can change the lip/barrel to change their size. Althrough rebarreling cost as much as buying a new set of wheels.
I'll be calling Logan over at Work tomorrow so I'll see if he remember any specs on your VS-XX.
How wide are the wheels you're running?
The nice thing is since they're multi pieces you can change the lip/barrel to change their size. Althrough rebarreling cost as much as buying a new set of wheels.
I'll be calling Logan over at Work tomorrow so I'll see if he remember any specs on your VS-XX.
anyway...I also stripped/sanded the ANODIZED clear on one of them today and polished it ...MIRROR finish, it'll do until we get them copper dipped and the lips re-anodized.
until then, after every wash...*polish-polish-polish*
#45
Instructor
iTrader: (2)
I did some measuring today...looks to be 9.5 in. rims, the front lips/outer barrel is 3.5 and the rear barrel is 6.5, center is .5 in...I measured from lip to lip and it's 10.5, subtract your .5 in. per bead-lip and you get 9.5.
anyway...I also stripped/sanded the ANODIZED clear on one of them today and polished it ...MIRROR finish, it'll do until we get them copper dipped and the lips re-anodized.
until then, after every wash...*polish-polish-polish*
anyway...I also stripped/sanded the ANODIZED clear on one of them today and polished it ...MIRROR finish, it'll do until we get them copper dipped and the lips re-anodized.
until then, after every wash...*polish-polish-polish*
Also been there done that with polishing wheels. Had a set of SSR Professor that was fully polished (face and barrel). I still remember sitting in the dark polishing them for 2 hours the night before Nisei Showoff. I'm never going to own anything that have to be polish again.
Talking about refinishing your Work. Did you check out Work site?
Very nice finish but so much money.
http://www.workwheelsonline.com/wxx209012090105.html
A cheaper set.
http://www.workwheelsonline.com/work...181055120.html
#46
Instructor
Thread Starter
I replied to your other thread about polishing the VS-XX.
Also been there done that with polishing wheels. Had a set of SSR Professor that was fully polished (face and barrel). I still remember sitting in the dark polishing them for 2 hours the night before Nisei Showoff. I'm never going to own anything that have to be polish again.
Talking about refinishing your Work. Did you check out Work site?
Very nice finish but so much money.
http://www.workwheelsonline.com/wxx209012090105.html
A cheaper set.
http://www.workwheelsonline.com/work...181055120.html
Also been there done that with polishing wheels. Had a set of SSR Professor that was fully polished (face and barrel). I still remember sitting in the dark polishing them for 2 hours the night before Nisei Showoff. I'm never going to own anything that have to be polish again.
Talking about refinishing your Work. Did you check out Work site?
Very nice finish but so much money.
http://www.workwheelsonline.com/wxx209012090105.html
A cheaper set.
http://www.workwheelsonline.com/work...181055120.html
and you know what's funny??? I'm sure ash1221 will chime in here...those first set of Works were the ones we WANTED, but We just couldn't bring ourselves to drop $5500 on JUST rims, then another $1000+ on tires...and THEN another $1000 on coil overs. We like our savings account too much to do that!
The following users liked this post:
ash1221 (09-03-2013)
#47
Burning Brakes
Kenstlshawd, the links you provided are different size wheels hence the price difference. But basically the same model. Also, you can go to a dealer and get them for quite cheaper than that. Those are MSRP prices.
#49
that's why they're going on MY car and NOT YOURS, right? I thought they fit nicely when FYAH had them and I think they will fit nicely when we put them on ours...and if I, ME, MYSELF or MY WIFE feel it isn't how we want them to sit...then WE will deal with it then...so, MY taste.
I can tell you are very proud of your new car; that's why I thought you would have gone with a brand new set.
#50
I did some measuring today...looks to be 9.5 in. rims, the front lips/outer barrel is 3.5 and the rear barrel is 6.5, center is .5 in...I measured from lip to lip and it's 10.5, subtract your .5 in. per bead-lip and you get 9.5.
anyway...I also stripped/sanded the ANODIZED clear on one of them today and polished it ...MIRROR finish, it'll do until we get them copper dipped and the lips re-anodized.
until then, after every wash...*polish-polish-polish*
anyway...I also stripped/sanded the ANODIZED clear on one of them today and polished it ...MIRROR finish, it'll do until we get them copper dipped and the lips re-anodized.
until then, after every wash...*polish-polish-polish*
The following users liked this post:
losimus (09-05-2013)
#52
NP man im glad the shipping finally worked.when i saw the wheels in the pic you posted a small tear came out.lol......i will be coming back to see how the wheels look on you car
BTW you should think twice about painting the wheels gold .im sure they will look real good with you car but burning silver is a bit rare and looks real good with any color.
BTW you should think twice about painting the wheels gold .im sure they will look real good with you car but burning silver is a bit rare and looks real good with any color.
#53
Instructor
Thread Starter
NP man im glad the shipping finally worked.when i saw the wheels in the pic you posted a small tear came out.lol......i will be coming back to see how the wheels look on you car
BTW you should think twice about painting the wheels gold .im sure they will look real good with you car but burning silver is a bit rare and looks real good with any color.
BTW you should think twice about painting the wheels gold .im sure they will look real good with you car but burning silver is a bit rare and looks real good with any color.
As for the gold...we're set on getting them COPPER plated/dipped, with the polished lip. BUT, that's not going to be for a little bit. Gonna get the coils and rock the burning black for a minute, especially since I wrapped the front and back silver pieces in brushed gunmetal...I agree, that burning black will look real good!
The following users liked this post:
losimus (09-13-2013)
#55
Instructor
Thread Starter
okay...been BUSY the past month. BUT...finally pulled the trigger on the rims this past Friday. They'll be done in another 1.5 weeks.
just ordered the TPMS sensors today, and later tonight...the Tein SS'...pics as soon as all are here!
just ordered the TPMS sensors today, and later tonight...the Tein SS'...pics as soon as all are here!
#56
Those were Cass's first set of wheels? I never knew they were all 9.5's I thought he started running staggered from the get like the rest of us... He's damn sure Staggered now LoL... The last set of rears whoa... I agree they look good from the side but it's that ass view you can't get with less than 10.5's... but had you never told anyone we'd of never known... =-)
#57
Instructor
Thread Starter
Those were Cass's first set of wheels? I never knew they were all 9.5's I thought he started running staggered from the get like the rest of us... He's damn sure Staggered now LoL... The last set of rears whoa... I agree they look good from the side but it's that ass view you can't get with less than 10.5's... but had you never told anyone we'd of never known... =-)
yeah, I liked that look on the wife's M45 when we had the 20x10's, just didn't want the hassle of rear lip work to get 10+ under there.
#58
Yeah, but they were 9's all around when he had them, sold them to Ray (aspecallday) and he swapped out the lips to make them 9.5's...then he sold them to me. I kind of liked the fact that they have been previous board member's rims..."keeps it in the family" type of thing. We're just going to bling 'em up so we can change it up a little.
yeah, I liked that look on the wife's M45 when we had the 20x10's, just didn't want the hassle of rear lip work to get 10+ under there.
yeah, I liked that look on the wife's M45 when we had the 20x10's, just didn't want the hassle of rear lip work to get 10+ under there.
#59
Instructor
Thread Starter
FYAH had his rear fenders PULLED...I figured he had to to make the 10.5's fit (or was it for 11's?). Plus...25 series tire...Not in my neck of the woods of So.Cal., that's begging For a bent lip. Maybe the next set of rims will be wider...but until then, we'll be rockin' single digits
#60
FYAH had his rear fenders PULLED...I figured he had to to make the 10.5's fit (or was it for 11's?). Plus...25 series tire...Not in my neck of the woods of So.Cal., that's begging For a bent lip. Maybe the next set of rims will be wider...but until then, we'll be rockin' single digits
#61
Instructor
Thread Starter
there it is...just put the order in on our Tein Super Streets...VR-Speed.com had the best deal. should be here at the same time of our rims...then, I'll be busy FINALLY hookin' up the TL.
#62
Instructor
Thread Starter
BUSY week! Vegas for a day then friends, wife and I flew to Denver for the Broncos game, got the TPMS in the mail...and got off work today to a wonderful sight (thought I'd throw the sensors in for effect)
Rims should be on schedule fore Friday...then more pics...install shortly after...then MORE pics. haha
Rims should be on schedule fore Friday...then more pics...install shortly after...then MORE pics. haha
Last edited by losimus; 10-30-2013 at 11:07 PM. Reason: mispelling
#63
Drifting
iTrader: (1)
Looking forward to pics...
More importantly, that's awesome you went to the Denver game last weekend! I've been to every Broncos game in FL for the past 13 years but never been to a home game. I think it would be kinda weird cheering on my team while everyone else is cheering too, haha. I kinda like being the obnoxious 'away' fan.
BTW, if you're interested in some Broncos WP's for your car click here. Those are a bit older and I have some new ones so shoot me a PM if you're interested and I'll either email them over or put them in the WP thread.
More importantly, that's awesome you went to the Denver game last weekend! I've been to every Broncos game in FL for the past 13 years but never been to a home game. I think it would be kinda weird cheering on my team while everyone else is cheering too, haha. I kinda like being the obnoxious 'away' fan.
BTW, if you're interested in some Broncos WP's for your car click here. Those are a bit older and I have some new ones so shoot me a PM if you're interested and I'll either email them over or put them in the WP thread.
Last edited by ucf_bronco; 10-31-2013 at 01:50 PM.
The following users liked this post:
losimus (10-31-2013)
#64
Instructor
Thread Starter
Looking forward to pics...
More importantly, that's awesome you went to the Denver game last weekend! I've been to every Broncos game in FL for the past 13 years but never been to a home game. I think it would be kinda weird cheering on my team while everyone else is cheering too, haha. I kinda like being the obnoxious 'away' fan.
BTW, if you're interested in some Broncos WP's for your car click here. Those are a bit older and I have some new ones so shoot me a PM if you're interested and I'll either email them over or put them in the WP thread.
More importantly, that's awesome you went to the Denver game last weekend! I've been to every Broncos game in FL for the past 13 years but never been to a home game. I think it would be kinda weird cheering on my team while everyone else is cheering too, haha. I kinda like being the obnoxious 'away' fan.
BTW, if you're interested in some Broncos WP's for your car click here. Those are a bit older and I have some new ones so shoot me a PM if you're interested and I'll either email them over or put them in the WP thread.
I'll tell you right now, that if you're a Broncos fan...you HAVE to see them at "Mile High" (well, the NEW Mile High) AT LEAST ONCE in your lifetime! SOOOOOO much ORANGE, and it's so loud there...we actually had a little hook-up there and got a last minute tour of the stadium and got to go onto the field level and into the visitor's locker room. Oh, and you can be a CHEAP date there, the elevation + beer/liquor ='s DRUNK on a 6 pack!
#65
Drifting
iTrader: (1)
Wow...that's pretty impressive about you and the Broncos these past 13 yrs.! I WISH I could do that with San Diego...but that's a 3 hr (4 with game-day traffic) and not to mention TRYING to get tix for that game (USUALLY a MNF game).
I'll tell you right now, that if you're a Broncos fan...you HAVE to see them at "Mile High" (well, the NEW Mile High) AT LEAST ONCE in your lifetime! SOOOOOO much ORANGE, and it's so loud there...we actually had a little hook-up there and got a last minute tour of the stadium and got to go onto the field level and into the visitor's locker room. Oh, and you can be a CHEAP date there, the elevation + beer/liquor ='s DRUNK on a 6 pack!
I'll tell you right now, that if you're a Broncos fan...you HAVE to see them at "Mile High" (well, the NEW Mile High) AT LEAST ONCE in your lifetime! SOOOOOO much ORANGE, and it's so loud there...we actually had a little hook-up there and got a last minute tour of the stadium and got to go onto the field level and into the visitor's locker room. Oh, and you can be a CHEAP date there, the elevation + beer/liquor ='s DRUNK on a 6 pack!
#66
Racer
Hey Losimus, did you ordered the washers and nuts for the TPMS too? I think you bought it from the same eBay seller as me for like $17-18 a piece.
#67
Instructor
Thread Starter
haha, yeah, they were each like $16 and some change, probably from the same seller. But, no, we still haven't got the hardware to install TPMS...someone said the hardware was only like $7 from Honda, so when we go pick up the rims, we'll pick those up too.
The following users liked this post:
losimus (11-06-2013)
#69
Instructor
Thread Starter
yeah, 9.5's and +31(F), +25(R)...should be nice and flush like how they fit on aspec's. just waiting on WheelFlip! I guess I'll call today and get a time-frame (supposed to have been ready this last Friday).
#71
Instructor
Thread Starter
The following users liked this post:
losimus (11-06-2013)
#73
Instructor
Thread Starter
Awesome...did some online research on them...most people who had problems were from like last year and people who shipped to them. but all in all...most people who got the "2 week" time table ended up waiting 4 weeks MINIMUM from WheelFlip. and here I thought these guys were LEGIT.
#74
Instructor
Thread Starter
Emailed Alex at WF and he said the lips are done being chrome dipped...just waiting on the copper faces. I guess they went to SEMA and didn't plan nor foresee other businesses going to SEMA, hence DELAYING all projects/jobs. But he did reassure me that they are expecting them in this coming week.
Well...trying to waste some time while we wait for the rims to be finished, sooooo...tinted the tails all red. I like them a lot more than stock. Eventually want '12+ tails or opened up to black them out, but these will do!
Well...trying to waste some time while we wait for the rims to be finished, sooooo...tinted the tails all red. I like them a lot more than stock. Eventually want '12+ tails or opened up to black them out, but these will do!
The following users liked this post:
losimus (11-10-2013)
#76
Instructor
Thread Starter
Haha, thanks...i'm actually going to go for a King Leonidas look...but still in the beginning stages.
anyway, yeah, after I got see the tails blingin' in the sun today, I think we'll stay with the reds. If anything, spray them transparent red and clear coat them instead (just a cleaner look and more durable).
anyway, yeah, after I got see the tails blingin' in the sun today, I think we'll stay with the reds. If anything, spray them transparent red and clear coat them instead (just a cleaner look and more durable).
#77
Instructor
iTrader: (2)
Awesome...did some online research on them...most people who had problems were from like last year and people who shipped to them. but all in all...most people who got the "2 week" time table ended up waiting 4 weeks MINIMUM from WheelFlip. and here I thought these guys were LEGIT.
#78
Instructor
Thread Starter
Only place I kept running into that seems to be "legit" is VR Motoring (or VR Wheels)...but, I also got the same praise about WheelFlip. Only time will tell.
#79
Banned
Haha, thanks...i'm actually going to go for a King Leonidas look...but still in the beginning stages.
anyway, yeah, after I got see the tails blingin' in the sun today, I think we'll stay with the reds. If anything, spray them transparent red and clear coat them instead (just a cleaner look and more durable).
anyway, yeah, after I got see the tails blingin' in the sun today, I think we'll stay with the reds. If anything, spray them transparent red and clear coat them instead (just a cleaner look and more durable).