So I finally got the cathodes to work on the driver's side through the fusebox. The problem was I was plugging the "Add-a-Circuit" backwards so the positive charge wasn't there.

There's two problems I face now:

1.) How do I hide the wires that will be connected to the drivers side from the passenger side to light up the cathodes?

- I can wire it through the firewall into the hood and then back around into the driver's side through the firewall but I think I rather go through the center console. That leads to me asking if anybody has pryed open the center console yet and how I would go about doing that.

2.) The second question is, which wire do I tap into to have the cathodes turn on when I open the door. I pryed off the door sill plastic piece and found the tube that links to the botton that door hits when closed but it leads into a place where I can't physically reach. So I'm hoping one of the wires underneath the dash near the fusebox is the wire I'm looking for.

Any ideas? I'll post up pictures of the driver side as soon as I can a chance! and the blue LEDs in the step courtesy slot.

 

Nothing at all? Guess I'm gonna have to try doing it myself and write up a DIY if anybody needs it.