tamadabee128

i tried searching but couldn't find...maybe i just suck at searching but...

anyone know if work vs-xx 19x8 +26 all around will clear TL-S brakes?

thanks!

wrxyboy

iTrader: (2)

it depends on the wheel if it was built for the big break or you can add spacers.

princelybug

iTrader: (16)

With a +26 offset, you'll be able to clear the BBK.

princelybug

iTrader: (16)

But, just my : Get at least an 8.5" wide wheel.

Etohprn247

iTrader: (6)

axis supermesh 19x8.5 +38 didn't clear bbk type-s etc. just reference

wasupdog

iTrader: (2)

depends on the face type. i think work makes 3 different face options, so the face with the deepest lip might not clear. it's hard to say without knowing the face type or a test fit.

BoBByLiGhT83

iTrader: (1)

Not to sure about this, but I think it depends on the center part of the wheel more so than the offset.You have to have the R disk for them to clear the big brake. Here is the info from the Work website

http://workwheelsusa.com/media/wheel...5/VSXX_PDF.pdf

CubanLynx84

iTrader: (2)

So to read that chart in order to clear brembo's i would have to look at the R disk offset and I could use either the A Disk or O Disk for the rears. I ask because I found a set of VS-XX in gold for a pretty good price. 19x8.5 +19 fronts and 19x9.5 +29 rears.

BoBByLiGhT83

iTrader: (1)

Exactly.. The A disk is a standard lip, O disk is the deep dish. Either one can go in the rear.