i think im going to buy racing hart evolution c2 in 18x7.5 with 225/40/18 will it rub? it has 42 offset.. please help, do you think it will look good on a silver tl with oem kit?

 

I thought the size and offset sounded familiar. Have a read on this thread. They discuss the same size and offset.

http://www.acura-tl.com/forum/showth...threadid=32635

And IMO, C2's on a silver TL with a kit would look damn nice

 

Did you see these in the galleries? Not silver but.....

 

thanks tuff, yah i saw that picture but it doesnt really have a good side view, i dont wanna cut the tab, but if i decide to get them and rub i guess i will have too..

 

Read my SIG. I just had to get my rear fenders trimmed.

One more thing,

RH Evo C2 (1 piece) is not made by Racing Hart.
Racing Hart C2 (3 piece) is made by Takechi.

RH & Racing Harts are two different company
although DAZZ motorsports would like you to think that.
Racing Hart is made in Japan by Takechi but RH is made here in the US or Taiwan by some company. I could never figuer out who and where RH Evo's are made from.

Anyone know???

 

Hey!!!! Thats my car!!!!!!
Uhhh.... you will be ok in the front, but in the back you will have to roll the Sh%t out of the fender. They are nice tho. I like them.

 

all you did was cut the plastic tab in the back? and u dont rub anymore?

 

Finally, someone knows the difference between RH & Racing Hart! I have a set of RH's and I believe Prime Wheels manufacture the RH line in the US.

 

Like This?

 

Sh!t!!.....Especially like that! The pimpness triples when 3 pieces are involved:wow:

 

it looks pretty good...i like...but the C2's aren't exactly my favorite wheel...i see them around in pics alot.

 

go for the HP Racing HUrricanes....they look just like the C2s but for like 400 bucks cheaper....im ordering mine in two weeks..should have them by mid march..

 

I found that that you are right. Prime make the most of RH wheels but some are made in Taiwan or Philippines.

For example, the RH Evo C3 is made in philippines. Also all the
RH wheels that has QC stamp on them are made in Taiwan. When wheels get imported from out side of US, they have to be inspect to meet QC control so they have to be stamped with QC or have a sticker that says QC. Wheels that are made in US do not have to have QC stamp or sticker.

 

You had to roll the **** out of the fenders because you have
18x8 wheels which is .5 inchs wider than 18x7.5. 18x8 will make thing worse if you have low offset. All I had do was a minor trim to the bumper tab.