JayVee

iTrader: (21)

Ahhh, understand now...DK! lol ~ JK

Soltex05

1.Brand of Rim -Aspec Black Chrome
2.Rim size (diameter and width) - 18'
3.Offset - Stock Maybe? dont care
4.Brand of tire - SUNNY
5.Tire size - Front: 245/40/18
6.Drop Type and Amount - Looks good already...
7.Do they rub - No.
8.Transmission type (use of spacers if 6MT) - Automatic

JD TL-S

iTrader: (1)

^^^ Sweet

JayVee

iTrader: (21)

Is that how the FOG LIGHT is suppose to fit...Looks cockeyed

rockstar143

iTrader: (6)

Well, those are retrofit accord fogs so technically...they're not "supposed" to fit at all! But yeah, I agree...I had to trim off a little more on the inside to get it to go in more, and then ran a screw from the back on the outer edge to push that part forward.

J.

SUPER CLEAN WDP though...Nicely done!
Let us know how you like those Sunny tires...I stayed away from them because I assumed they were not good quality. Maybe I jumped the gun.

mzilvar

iTrader: (3)

1.Brand of Rim - TSW Snetterton
2.Rim size (diameter and width) - 18" x 8"
3.Offset - 40mm
4.Brand of tire - Falken Ziex ZE912
5.Tire size - 235/40/18
6.Drop Type and Amount - Tein SS about 2", 24" from ground to fender through the center of the tire
7.Do they rub - Infrequently
8. Transmission type (use of spacers if 6MT) - 5AT, none at the moment, have some 10mm's for the FR and 15mm for the R going on soon .. after alignment and rolling of the fenders.

rockstar143

iTrader: (6)

^^^Lookin good, man. These were some of the wheels I considered.

SaraSmiles

Hey guys I need help w wheel fitment. I sold my wheels bc the wouldn't fit. I bought new wheels and now they won't fit either. They are 18x10 +25 offset. They still won't clear my brembos. Can anyone help me. Of I get a 20mm spacer I feel like they will stick out way to far. Any help would be greatly appreciated. Thanks
Sara

JayVee

iTrader: (21)

WOW...That is CrAzY aggressive.

rockstar143

iTrader: (6)

I guess it depends on how much space you need to create. When you put the wheel up to the hub, how much further out would it need to be to allow space for the brakes?

veggiemonster

iTrader: (1)

wtf style are they that a et25 won't clear?!?!

JayVee

iTrader: (21)

That is what I was thinking...What is the bolt/face pattern design for a dam 25 NOT to clear. That is alot of wheel outward setting, why it won't clear the brakes?

SaraSmiles

I think I need a 20mm spacer and def not doing that bc they will stick out to much for my taste. They are xxr 521. The BBS LM style.

rockstar143

iTrader: (6)

I was going to say, they must have a huge lip on there to not work at that offset. +45's work, no problem...if it's a spoked wheel.

veggiemonster

iTrader: (1)

try linea corse models. they make that style also, and i've heard they have better clearance than most LM reps out there

SaraSmiles

Ahh ok gotcha! Thanks guys

rockstar143

iTrader: (6)

Didn't XXR confirm they'd fit your car prior to selling them to you?

JayVee

iTrader: (21)

+1...GREAT MINDS think alike...AGAIN!

ebelp

1.Brand of Rim - Work Termist TM1
2.Rim size (diameter and width) - 18x8 (F), 18x9 (R)
3.Offset - +35
4.Brand of tire - Kumho Ecsta 4X
5.Tire size - 225/40/18
6.Drop Type and Amount - ISC N1 Coilovers - ~2.5"
7.Do they rub - YES, fenders aren't rolled yet
8. Transmission type (use of spacers if 6MT) - 5AT, with 20mm spacers up front, rear spacers not mounted yet

SaraSmiles

I bought them used didn't think I would have such a problem!

JayVee

iTrader: (21)

Obviously, NOT from another TL owner with BREMBO's...

SaraSmiles

So now I found another set and before buying lol these ones are 18x8 +43 now will this fit? I will just get a spacer to bring them out. Here's a pic of them

Thanks guys

JayVee

iTrader: (21)

is that a "BRUSHED" on time attack red pin stripe? Beautiful wheel...The stripe KILLS em completely for me. But YES! With a spacer, should clear. I would go 5mm. Are they real deal VOLK? I just hate wheels showing all the universal bolt patterns.

SaraSmiles

Yea there real. If everyones wheels were the same oh how boring the car scene would be.

JayVee

iTrader: (21)

I said "BEAUTIFUL wheel"... minus the obvious. And another question. This time u might actually answer it. Why does it seem like you are getting/finding wheels that have fitment for a TSX/RSX?

rimike

1. Brand of wheel- Enkei Imola
2. Wheel size- 18x8
3. Offset-40mm
4. Brand of tire-Continental Extreme Contact DW
5. Tire size- 235/40-18
6. Drop- N/A
7. Do they rub- No
8. Transmission- 6 speed manual Brembo brakes, no spacers.

Apollo05

1. Brand of wheel - XXR 522
2. Wheel size - 17x9
3. Offset - +25mm
4. Brand of tire - Continental Extreme Contact DWS
5. Tire size - 235/45/17
6. Drop - TEIN S-TECH (ABOUT 1.4")
7. Do they rub - No
8. Transmission - 5AT

aznkikaz

iTrader: (2)

anyone have experience with 18x9.5 rim +22 offset with 245/4018 tires? Im lowered 2.5 inches with coils

Im getting them mounted soon in the front, scared they might rub so much i cant drive it home LOL

rockstar143

iTrader: (6)

9.5, +22 AND a 245 will be tough, but you have coils so technically you can raise the car up a bit to get home.

Biggest factor for you is...do you have any camber kits?!? If not, you MIGHT be able to swing it. Otherwise, bring a hammer and a dremel and knock the front tab out of the way and let the tire do the rest of the rolling

Not really, have it done right.

Rear...with natural camber I THINK you'll be fine.

Apollo, not the greatest pics, but we get the idea...looks pretty good...probably nice and light. Any other reason why you opted for a 17 in this style wheel? Looks a tad small!

JayVee

iTrader: (21)

Take better pics...

rockstar143

iTrader: (6)

Don't make me get Steven Bell in here to tell you not to quote whole sets of pictures Jay!!!

JayVee

iTrader: (21)

awwww lawd...I can here him now...lol!

cdavis1

1.Brand of Rim - Hi-Performance Designs, Inc.
2.Rim size (diameter and width) - 18 x 7.5 (4)
3.Offset - +42 (4)
4.Brand of tire - Nexen N3000
5.Tire size - ZR 245/40/18
6.Drop Type and Amount - Eibach Pro-Kit @ approx. 1.3
7.Do they rub - No rubbing (rolled fenders)
8.Transmission type (use of spacers if 6MT) - AT...but have Motorsport-Tech 5mm hub centric/wheel centric spacers (front/rear)

LicoLpz121

1.Brand of Rim - ST100's by Sonic Tuning
2.Rim size- 19x8
3.Offset - +38
4.Brand of tire - Nankang NS-II
5.Tire size - 225/35-front 235/35-back
6.Drop Type and Amount - A-SPEC (about .5')
7.Do they rub - not really only when goin down a hill the back rubs a bit
8.Transmission type (use of spacers if 6MT) - 6MT. 15mm front 20mm back

IIDXholic

iTrader: (5)

^ Nice

whtdvil

[quote=ebelp;13642257]1.Brand of Rim - Work Termist TM1
2.Rim size (diameter and width) - 18x8 (F), 18x9 (R)
3.Offset - +35
4.Brand of tire - Kumho Ecsta 4X
5.Tire size - 225/40/18
6.Drop Type and Amount - ISC N1 Coilovers - ~2.5"
7.Do they rub - YES, fenders aren't rolled yet
8. Transmission type (use of spacers if 6MT) - 5AT, with 20mm spacers up front, rear spacers not mounted yet






Looks almost like mine Just waiting for that TAX $$$$$

rockstar143

iTrader: (6)

Very nice...looks like if you just hammer that front tab flat, you'll be just fine.

richboihawj

1.Brand of Rim - ASA AR1,
2.Rim size (diameter and width) - 19x8.5
3.Offset - 35 or 37
4.Brand of tire - Hankook Ventus V12
5.Tire size - 235/35/19
6.Drop Type and Amount - 1.5 Front and 1.7 Rear, Neuspeed Sport
7.Do they rub - Sometimes, less now that the rear are rolled
8.Transmission type (use of spacers if 6MT) - 6speed, 20mm fronts, 25mm Rear (Adapters for 5x120)

NTSPEEDTL

iTrader: (1)

love this show-thread!!

Hammer18

1.Brand of Rim -Type S
2.Rim size (diameter and width) - 17x8
3.Offset - Stock
4.Brand of tire - Michelin Pilot Super Sport
5.Tire size - Front: 235/45/18
6.Drop Type and Amount - A-Spec suspension
7.Do they rub - No.
8.Transmission type (use of spacers if 6MT) - 6MT, No Spacers