Comptech Sport Springs Installed
#1
302.7 WHP 251.3 Torque
Thread Starter
Join Date: Sep 2004
Location: Pittsburg, CA
Age: 75
Posts: 154
Likes: 0
Received 0 Likes
on
0 Posts
Comptech Sport Springs Installed
Greetings:
Today I had Comptech install their Sport Springs, Rear Camber Adjusters and Adjustable Ball Joints (front wheels).
Just another great install by the Comptech Install Team.
The ride is much tighter.
Hope to see many of you this weekend at the Sac Meet.
Tim
Today I had Comptech install their Sport Springs, Rear Camber Adjusters and Adjustable Ball Joints (front wheels).
Just another great install by the Comptech Install Team.
The ride is much tighter.
Hope to see many of you this weekend at the Sac Meet.
Tim
#3
302.7 WHP 251.3 Torque
Thread Starter
Join Date: Sep 2004
Location: Pittsburg, CA
Age: 75
Posts: 154
Likes: 0
Received 0 Likes
on
0 Posts
Hello:
It's about 1.5" all around. Next step is to upgrade the front brakes, new rims and then SC. Comptech told me today the SC for the 04AT should be ready by late summer.
I'll have to save my pennies..
Tim
It's about 1.5" all around. Next step is to upgrade the front brakes, new rims and then SC. Comptech told me today the SC for the 04AT should be ready by late summer.
I'll have to save my pennies..
Tim
#5
302.7 WHP 251.3 Torque
Thread Starter
Join Date: Sep 2004
Location: Pittsburg, CA
Age: 75
Posts: 154
Likes: 0
Received 0 Likes
on
0 Posts
Hello:
I just measured from the ground through the middle of the wheel to the bottom of fender.
Front 26 1/8"
Rear 25"
I'm not sure what the original measurements where.
I will bring my tap measure Saturday to the Sac Meet.
Tim
I just measured from the ground through the middle of the wheel to the bottom of fender.
Front 26 1/8"
Rear 25"
I'm not sure what the original measurements where.
I will bring my tap measure Saturday to the Sac Meet.
Tim
#7
302.7 WHP 251.3 Torque
Thread Starter
Join Date: Sep 2004
Location: Pittsburg, CA
Age: 75
Posts: 154
Likes: 0
Received 0 Likes
on
0 Posts
Hello:
I just measured from the ground through the middle of the wheel to the bottom of fender.
I went to the Concord Acura and made measurements.. Here are the results:
Front Original 27"
Front New 25 3/4"
Rear Original 27"
Rear New 25 1/2"
The cars were parked next to each other on the same surface. Same color cars!
Tim
I just measured from the ground through the middle of the wheel to the bottom of fender.
I went to the Concord Acura and made measurements.. Here are the results:
Front Original 27"
Front New 25 3/4"
Rear Original 27"
Rear New 25 1/2"
The cars were parked next to each other on the same surface. Same color cars!
Tim
Trending Topics
#10
k6biv, is that the old CT springs or the repackaged Eibachs? And if you don't mind me asking, what did the install cost? I plan on doing the same thing around April/May. Thanks much!
#11
Reppin' for tha DPG
Join Date: Nov 2004
Location: Bay Area, CA
Age: 44
Posts: 174
Likes: 0
Received 0 Likes
on
0 Posts
Hawhyen51 k6biv, is that the old CT springs or the repackaged Eibachs? And if you don't mind me asking, what did the install cost? I plan on doing the same thing around April/May. Thanks much!
![Thumbs Up](https://acurazine.com/forums/images/smilies/thumbsup.gif)
#12
302.7 WHP 251.3 Torque
Thread Starter
Join Date: Sep 2004
Location: Pittsburg, CA
Age: 75
Posts: 154
Likes: 0
Received 0 Likes
on
0 Posts
Hello:
I'm not sure whose spring they are. I was told that Comptech makes them. The total cost installed by Comptech was about $1,100.00.
This includes the real camber adjusters and new front adjustable ball joints.
Tim
I'm not sure whose spring they are. I was told that Comptech makes them. The total cost installed by Comptech was about $1,100.00.
This includes the real camber adjusters and new front adjustable ball joints.
Tim
#15
Originally Posted by k6biv
Hello:
I'm not sure whose spring they are. I was told that Comptech makes them. The total cost installed by Comptech was about $1,100.00.
This includes the real camber adjusters and new front adjustable ball joints.
Tim
I'm not sure whose spring they are. I was told that Comptech makes them. The total cost installed by Comptech was about $1,100.00.
This includes the real camber adjusters and new front adjustable ball joints.
Tim
I don't like that middleman approach. If I have a problem with my SPC stuff I call SPC. If my springs have problems I call Eibach.
Comptech don't make much at all. They do some minor final machine work on some things, weld up some pipe, but for the most part they get parts already finished or they simply "middleman" the part.
Thread
Thread Starter
Forum
Replies
Last Post
k6biv
Member Cars for Sale
1
09-10-2015 06:37 PM