does anybody have axis 7mod on the TL??
can you post some picture??
from the website..i found out the 19" 7mod only offer +45mm offset..
will this rub?
imy car is currently lowed with H&R sport spring.
thank you

 

what is the rim width?

 

19x8 +45

 

Even if you shave the rear fender tabs, you'll still rub with full load of people and in a hard corner.

 

18x7.5 42mm offset

 

axis are pretty good quaitly rims right?

 

and i have done alot of research!

 

how much are the axis mod seven???

 

Depends on size and finish. Starts anywhere from $300-$500 per wheel. Much cheaper than the Axis Se7en 3-piece which starts at around $1400 per wheel! :wow: Not that's Nuckin' Futs!

 

in terms of quailty...would you say axis is better then rh evolution...i want the mods and i wna tto have the spokes painted....but then the rhevo GT5 already have black spokes...so that would sav eme some moeny.what do you guys think is better quaility?

alos..for some reason the axis mods look weaker to me..and it looks like it would make my camber worse then a normal wheel....i dont know why..it just does...can anyone tell me im wrong?

 

so the highest offset from this rims is +45mm i think..
will it be better if i choose 225/35/19 instead of 235/35/19?
will i still have problem if i roll my fender?

thank you

 

i have 5zigen evo, 19x8 +45 offset with 225/35/19 and no rubbing after cutting the tabs. it dont rub on hard corners or with 4 people in the car

 

what kind of drop do you have and did you correct camber?

 

My Mod Se7en is on order right now...I'm waiting for the "Maxis Concept" Mod...these rims go on the back and is suppose to give your ride the "staggered" look w/o using diff size tires...

my rims are 18x7.5 w/ +42mm offset

 

the Maxis Lip is cool, but not that practical - since you can't rotate your tires if you get them. I like the way they look though