Steering wheel emblem
Steering wheel emblem
My 2007-2008 steering wheel emblem (A) is peeling...someone said the emblem is part of the airbag and cannot be replaced. But other guys told me that you can try to get this emblem below but I am not too sure if it works or not.
has anyone already tried this?
http://cgi.ebay.com/ebaymotors/05-10...s#ht_500wt_704
I really need the help, ANYONE?????
has anyone already tried this?
http://cgi.ebay.com/ebaymotors/05-10...s#ht_500wt_704
I really need the help, ANYONE?????
Ive haven't seen anyone attempt this usually for a number of reasons.
Your still going to remove your airbag and seperate the cover from the airbag unit.
In 90% of the cases the emblem is part of the cover. In this case judging by those photos I would suspect you will need to break off the emblem and secure it. How do you do that? No idea.. Once you removed the airbag cover off the airbag unit you will notice that the emblem looks like it's put in place with plastic rivets. In any case you will need to secure this very well so that it doesn't fall off, and most importantly fly off when in an accident.
Your still going to remove your airbag and seperate the cover from the airbag unit.
In 90% of the cases the emblem is part of the cover. In this case judging by those photos I would suspect you will need to break off the emblem and secure it. How do you do that? No idea.. Once you removed the airbag cover off the airbag unit you will notice that the emblem looks like it's put in place with plastic rivets. In any case you will need to secure this very well so that it doesn't fall off, and most importantly fly off when in an accident.
I just bought one of those off of ebay 2 days ago i will let you know how it goes, from the looks of the photo it seems that those plastic tabs are ment to be melted to the cover. What i plan on doing is getting some fine twizzer to pick the old emblem out and use 3m emblem glue for the new one.
I just bought one of those off of ebay 2 days ago i will let you know how it goes, from the looks of the photo it seems that those plastic tabs are ment to be melted to the cover. What i plan on doing is getting some fine twizzer to pick the old emblem out and use 3m emblem glue for the new one.
they are melted onto the cover. i tried getting one off of a civic airbag that was junk and i destroyed the cover, but it can be done. huge pita
Last edited by mikedog4; Nov 15, 2010 at 09:04 AM.
I just bought one of those off of ebay 2 days ago i will let you know how it goes, from the looks of the photo it seems that those plastic tabs are ment to be melted to the cover. What i plan on doing is getting some fine twizzer to pick the old emblem out and use 3m emblem glue for the new one.
Trending Topics
Don't try it I bought it and it was a waste. I could not find a way to get the old one off, I tried to pull it off and even took the airbag out still no way and ended up making it look worse so I ordered a new airbag from Acura. The list is about $700 and I was able to get for $520 and I sold my old airbag on ebay for $300 with the emblem I bought for it.
He posted the same thing in 2 other threads. I ask him on both threads why not just post it here. Hes reply was, "I found a maker of the oem emblems and I want 1 for my car, however they have a 20 piece minimum."
Thread
Thread Starter
Forum
Replies
Last Post
rockyboy
2G RDX (2013-2018)
171
Aug 4, 2024 10:35 AM







