rockstar143's '04 NBP progress thread (part deux continues after 6 year hiatus)
#7801
Race Director
iTrader: (3)
Join Date: Feb 2012
Location: South Florida
Age: 31
Posts: 18,278
Received 3,824 Likes
on
2,847 Posts
:ghey:
#7802
Three Wheelin'
iTrader: (7)
SIMILAR! You have the RZ, no? These are RS. Grouping of the spokes is the only difference, yours are pairs of 5, mine are evenly spaced 10. Love them too, thank you. but why you trying to sell yours?
RZ is 18x9 45 offset and powdercoated matte black.
On the other hand, RS is 18x9 29 offset Dark gunmetal.
I'm selling RZ beacuae of RS.
Moar pics!!!!! Please..
I got one question though. I just saw you restored your headlights using spar and mineral spirits. I found that method on other forums and I did same on my headlights.
Have you check your cutoff at wall after that coat? Cause i checked mine and it's blurry as f**k! So this time, i'm gonna redo wet sand again and just polishing and check it again. I hope i can get it fixed.
Again, i love your new set up!!!
The following users liked this post:
rockstar143 (06-11-2013)
#7803
Really? So you're selling the RZ's to GET the RS's?
That's awesome, we certainly will be twinsies then.
My cuttoff is just fine, brother...BUT, i did lay it on while lights were on the ground and it dried perfectly flat. DO wetsand and buff it, and it'll likely end up perfect. I do notice a slight yellowish tinge to it, but a billion times better than the yellow that builds up from the sun damage.
One of my favorite shots...
http://www.flickr.com/photos/rockstar143/9001250998/http://www.flickr.com/photos/rockstar143/9001250998/ by http://www.flickr.com/people/rockstar143/, on Flickr
That's awesome, we certainly will be twinsies then.
My cuttoff is just fine, brother...BUT, i did lay it on while lights were on the ground and it dried perfectly flat. DO wetsand and buff it, and it'll likely end up perfect. I do notice a slight yellowish tinge to it, but a billion times better than the yellow that builds up from the sun damage.
One of my favorite shots...
http://www.flickr.com/photos/rockstar143/9001250998/http://www.flickr.com/photos/rockstar143/9001250998/ by http://www.flickr.com/people/rockstar143/, on Flickr
The following 2 users liked this post by MAS:
rockstar143 (06-11-2013),
yoks032rs (06-11-2013)
The following users liked this post:
rockstar143 (06-11-2013)
The following users liked this post:
rockstar143 (06-11-2013)
#7807
Race Director
iTrader: (3)
Join Date: Feb 2012
Location: South Florida
Age: 31
Posts: 18,278
Received 3,824 Likes
on
2,847 Posts
Yes. Brand new. The 19's, which I was leaning towards are more like $950 a piece.
You're better off finding a used set. I think I may stick to 18".
You're better off finding a used set. I think I may stick to 18".
#7809
Race Director
iTrader: (3)
Join Date: Feb 2012
Location: South Florida
Age: 31
Posts: 18,278
Received 3,824 Likes
on
2,847 Posts
lol it's a forged racing wheel, what do you expect?
#7811
Race Director
iTrader: (3)
Join Date: Feb 2012
Location: South Florida
Age: 31
Posts: 18,278
Received 3,824 Likes
on
2,847 Posts
I won't either. That's why I'm shooting for a used set.
#7812
LMAO, trust me, these were pushing it...
supposedly, these are just slightly lighter if not same and they are a flow cast vs the volks being forged. One of the hardest cast wheels on the market, from my research.
No complaints here
Yeah, Austin, do it...stick with 18's...all the cook kids are doing it!
supposedly, these are just slightly lighter if not same and they are a flow cast vs the volks being forged. One of the hardest cast wheels on the market, from my research.
No complaints here
Yeah, Austin, do it...stick with 18's...all the cook kids are doing it!
#7813
takin care of Business in
iTrader: (5)
Join Date: Jan 2008
Location: Kansas City, MO
Age: 40
Posts: 30,994
Received 4,732 Likes
on
4,064 Posts
WOAHHH !! what wheels are you looking at Austin?
the Work emotion series is not too expensive....look at the wheels there and you can get ~$500/wheel NEW (18")....
the Volk Racing or the Work VS series are very very expensive....Volks for being lightweight (see TE37 or Ce28N are 900-ish/wheel 18") and the Vs for pure design...
EDIT:other wheels like Advans or Wedssports are around 400-600/wheel depending on color and size....
the Work emotion series is not too expensive....look at the wheels there and you can get ~$500/wheel NEW (18")....
the Volk Racing or the Work VS series are very very expensive....Volks for being lightweight (see TE37 or Ce28N are 900-ish/wheel 18") and the Vs for pure design...
EDIT:other wheels like Advans or Wedssports are around 400-600/wheel depending on color and size....
The following users liked this post:
rockstar143 (06-11-2013)
#7814
Race Director
iTrader: (3)
Join Date: Feb 2012
Location: South Florida
Age: 31
Posts: 18,278
Received 3,824 Likes
on
2,847 Posts
Looking at Volk TE-37s, Anil.
The following users liked this post:
rockstar143 (06-11-2013)
#7815
Drifting
It was only a matter of time that Austin would hop on the wheel bus and want to change them. I really like the Forgester F14s but I want them in piano black
The following users liked this post:
rockstar143 (06-11-2013)
The following users liked this post:
Undying Dreams (06-11-2013)
#7817
takin care of Business in
iTrader: (5)
Join Date: Jan 2008
Location: Kansas City, MO
Age: 40
Posts: 30,994
Received 4,732 Likes
on
4,064 Posts
Austin...those will be sick....i would stick to 18" and they are Volk and not works LOL....
decided on color yet? if I remember reading right, Eric (Accuratein) was looking to sell his set...check with him (not sure if his set is 18" or 19")
decided on color yet? if I remember reading right, Eric (Accuratein) was looking to sell his set...check with him (not sure if his set is 18" or 19")
The following users liked this post:
rockstar143 (06-11-2013)
#7818
Race Director
iTrader: (8)
The following users liked this post:
rockstar143 (06-11-2013)
#7819
Did Austin edit? He said Volk.
Thanh, you figure out who I am on FB yet?
Bunch of guys in another thread were all "acurazine is full of aholes and people telling you to search, excpet Guitarplayer16". I told them you were on the other thread, and they're like, tag him...lazy fks.
Thanh, you figure out who I am on FB yet?
Bunch of guys in another thread were all "acurazine is full of aholes and people telling you to search, excpet Guitarplayer16". I told them you were on the other thread, and they're like, tag him...lazy fks.
The following 2 users liked this post by rockstar143:
guitarplayer16 (06-11-2013),
swoosh (06-11-2013)
#7820
Race Director
iTrader: (3)
Join Date: Feb 2012
Location: South Florida
Age: 31
Posts: 18,278
Received 3,824 Likes
on
2,847 Posts
I said Volk...you said Work.
I'm not a big fan of the gold color but if I didn't get a set that was the specific color...I'd have them refinished and powder coated.
I'm not a big fan of the gold color but if I didn't get a set that was the specific color...I'd have them refinished and powder coated.
The following users liked this post:
rockstar143 (06-11-2013)
#7821
Chapter Leader (Houston)
iTrader: (7)
Nice wheels man. Not sure I feel about the different color lip on a non lip wheel if you know what I mean. Just reminds of when a car is slammed and hella flush and the edge/lip of the wheels rub on the fender so they look machined.
The following users liked this post:
rockstar143 (06-11-2013)
#7822
takin care of Business in
iTrader: (5)
Join Date: Jan 2008
Location: Kansas City, MO
Age: 40
Posts: 30,994
Received 4,732 Likes
on
4,064 Posts
my mistake....
Austin did say Volk but for some reason I went to evasive motorsport and went to Work Emotion
Austin did say Volk but for some reason I went to evasive motorsport and went to Work Emotion
The following users liked this post:
rockstar143 (06-11-2013)
#7823
Dennis, that very well may have been why previous owner decided to get them machined...as for me, I am in LOVE with that aspect. With no contrast for so long, being able to see where the wheels sits in relation to the wheel arch when rolling is a BIG plus for me.
#7824
Drifting
Im still waiting for some rolling shots
lol
lol
#7826
Race Director
iTrader: (3)
Join Date: Feb 2012
Location: South Florida
Age: 31
Posts: 18,278
Received 3,824 Likes
on
2,847 Posts
The following users liked this post:
MEKO (06-11-2013)
#7827
Drifting
#7828
Race Director
iTrader: (3)
Join Date: Feb 2012
Location: South Florida
Age: 31
Posts: 18,278
Received 3,824 Likes
on
2,847 Posts
Oh yes. Very patience.
The following users liked this post:
TheLowLife (06-12-2013)
#7829
Three Wheelin'
iTrader: (7)
Really? So you're selling the RZ's to GET the RS's?
That's awesome, we certainly will be twinsies then.
My cuttoff is just fine, brother...BUT, i did lay it on while lights were on the ground and it dried perfectly flat. DO wetsand and buff it, and it'll likely end up perfect. I do notice a slight yellowish tinge to it, but a billion times better than the yellow that builds up from the sun damage.
One of my favorite shots...
IMG_1321 by swimex37, on Flickr
That's awesome, we certainly will be twinsies then.
My cuttoff is just fine, brother...BUT, i did lay it on while lights were on the ground and it dried perfectly flat. DO wetsand and buff it, and it'll likely end up perfect. I do notice a slight yellowish tinge to it, but a billion times better than the yellow that builds up from the sun damage.
One of my favorite shots...
IMG_1321 by swimex37, on Flickr
I ordered RS on April. I'm still waiting for them. I should get them late of this month or early July. I already ordered Hankook v12 225/40/18.
Hmm... Anyway I will have to redo my headlights this weekend again... We'll see.
Are you gonna get Advan center caps?
Love that shot dude!!!
#7830
Race Director
iTrader: (3)
Join Date: Feb 2012
Location: South Florida
Age: 31
Posts: 18,278
Received 3,824 Likes
on
2,847 Posts
J, find out what aperture you used for that shot, please?
#7831
Moderator
iTrader: (3)
The following users liked this post:
TheLowLife (06-12-2013)
#7832
Race Director
iTrader: (3)
Join Date: Feb 2012
Location: South Florida
Age: 31
Posts: 18,278
Received 3,824 Likes
on
2,847 Posts
O u think u smrt, huh?
The following users liked this post:
TheLowLife (06-12-2013)
#7833
Moderator
iTrader: (3)
I am, compared to you at least.
The following users liked this post:
TheLowLife (06-12-2013)
#7835
Moderator
iTrader: (3)
SLOTH RAGE! Austin's stare goes right through my soul though...
#7836
Race Director
iTrader: (3)
Join Date: Feb 2012
Location: South Florida
Age: 31
Posts: 18,278
Received 3,824 Likes
on
2,847 Posts
Murder runs through those veins.
#7837
Moderator
iTrader: (3)
#7838
Drifting
#7839
LMAO, I'm glad Tyler answered because I couldn't remember if I shot with my prime lens. I know that under F3.5 had to be my kit lens. 1.8 for sure is the fixed fitty. I generally leave it at ISO100 after that grainy convo we had...
You like them, Austin...I'm glad to hear it, bud.
You like them, Austin...I'm glad to hear it, bud.
#7840
Race Director
iTrader: (3)
Join Date: Feb 2012
Location: South Florida
Age: 31
Posts: 18,278
Received 3,824 Likes
on
2,847 Posts
The lower the ISO, the better.