Tezzeey

20 inch rims.. riding stock height... i need a drop badd.. any suggestions of how low on springs i can go without scraping everything.

07tl-s6spd

iTrader: (1)

looks clean...as far as the drop thing you need to post a sideshot so people can tell...but judging by those pics doesnt look like it needs much...maybe an inch or so

murph145

get coilovers that way you can adjust to fit the rims perfectly with springs u only got 1 option whatever the spring height is

Steven Bell

iTrader: (2)

Nice work Tezzeey-I like your carbon fiber work on the grill.

huystAr

iTrader: (3)

carbon nose looks good (: i cant really see your car or the detail of it, id probably try taking pics of the car with the light facing towards the car 1st pics looks good though

CLtotheTL32

iTrader: (3)

Those pictures are really small but from what I can tell, it looks good minus the wheels.

VQPower37

yea car looks good, not feelin the wheels, maybe the drop will help?

AMUA6

iTrader: (7)

+3. Definitely off to a good start though

Phambam12

are those 6000k or 8000k

Timb227

iTrader: (3)

Looks good from what I can see. Take some pictures with better lighting or during the day. Go 1-1.5" and you'll be fine

guitarplayer16

iTrader: (8)

Small pictures ftl =(

Car looks good though.

Tezzeey

guitarplayer16

iTrader: (8)

Pictures look blurry, but much better =)

I'm falling in love with the first two background haha

05_NBP_TL

iTrader: (1)

Daytime pics?

Teh CF grill looks hot

CLtotheTL32

iTrader: (3)

Look like 8000k to me.

Tezzeey

THANKS FOR EVERYBODYS INPUT

Ill post some soon... i think ill go with 1.5

thats exactly what i was going to do.. butt i dont have enough money haha

Di-Noc is amazing stuff

thanks..

thanks.. i was iffy of the rims.. for $700 almost new with new tires.. im not complaining

ill take some soon and post it

i see everyone on here take pics somewhere cool and iv been looking for one.. there was an empty train station right next to my house in the same parking lot that i washed my car at that i totally forgot about..

like i said.. Di-Noc is good stuff

actually my phone couldnt get the picture of my angel eyes so it blurred the light.. and the inside halo isnt on and for some reason its glowing blue?

rastaracer

looks good, i like the carbon fiber grilllll

boyhamdzui

iTrader: (1)

I like the carbon fiber. I plan to do it next month. If you warp exterior will it be okay to wash it ? ( I wash my car every week ) . And is it okay with the temperature around 100-105 ? ( That's how Houston is in the summer ).

Tezzeey

found this... hope it helps..


Technical
Construction
Polyvinyl chloride film with permanent adhesive.

Roll Size
1220mm x 50m (48in x 164ft).

Film Thickness Comparison
DI-NOC: 0.2159mm (0.0085in)
Sign vinyl: 0.0889mm (0.0035in)
Printer paper: 0.1016mm (0.004in)

Recommended Application Temperature
16-28C (60-82F).

Storage Conditions
Store film in a clean, dry environment, free from direct sunlight and at an ambient temperature below 38C (100F).

Service Temperature
The film was applied to an aluminum plate and exposed to temperatures in the range of –30C (-22F) to 65C (149F) for 12 days. Test Result: No peeling or discoloration.

Heat Resistance
Product applied to an aluminum plate and aged for 28 days at 65C (149F). Test Result: Minimal change to adhesion and film appearance.

Humidity Resistance
Product applied to an aluminum plate and aged for 28 days at 40C (104F), 90% RH. Test Result: Minimal change to adhesion and film appearance.

Stain Resistance
Product applied to an aluminum plate and placed in direct contact with the substances. Test conditions are 20C (68F), 65% RH. Substances tested are as follows: Milk, Coffee, Wine, Lemon Juice, Tea, Sodium Hydroxide (10%), Soybean Oil, Salt Water (1%), Household Ammonia, Soapy Water (1%), Synthetic Detergent Hydrochloric Acid (10%), Vinegar. Test Result: No effect

Dimensional Stability
A 100mm x 100mm “X” gash was made in a 150mm x 150mm film sample that was applied to an aluminum plate. The sample was exposed to a temperature of 65C (149F) for 48 hours and the maximum opening of the gash was measured. Test Result: 0.3mm maximum.

boyhamdzui

iTrader: (1)

Thanks for your information. But I don't know is it a good news or bad news . I don't have a garage so I put if outside maybe I can try in the shade. It's almost winter so I think It will be okay now but when summer .. It's can reach up to 110F outside. Anyway I will be an experiment , I can't resist the look. How can you do the grille ? It's look so special .

vinceeyy

looks like someone was at jamboree/edinger

paulonfiya

to dark lol but clean bro

Tezzeey

i think it would be fine, i hear it should stay on for 5ish years, if not just do it again, just make sure you wrap all the way around where it tucks away so it doesnt just peel off.

yupp exactlyyy

thanks, day pictures dont seem to turn out the way i like them to

boyhamdzui

iTrader: (1)

Look at this picture, the grille of yours look like black and silver , how can you do that ? or just because of the light reflection ?

Tezzeey

are you talking about the carbon fiber vinyl.. if so, yes it is does look black and some silver and yes its because of the light

Tezzeey

Day shots..





Shot at 2010-10-17

Shot at 2010-10-17

boyhamdzui

iTrader: (1)

That's so sad I thought some of new grille . Your car looks so nice .I think I will do the grille only like your avatar but I have to test first after get the roll next week . I'm so jealous with you . Thanks for responding my posts .

CLtotheTL32

iTrader: (3)

Your tires look beefy but it may just be the black lip that makes them look that way. What are the specs?

Tezzeey

Boyhamdzui- my center grille is just painted flat black..its not vinyl but if done correctly it should like the same


they are 20x8.5 on 245/35