Gun-metal painted calipers with ACURA decal...
#1
2021 RDX A SPEC
Thread Starter
Gun-metal painted calipers with ACURA decal...
just wanted to get some opinions on this look... decal was available from a source on Ebay.
#2
Moderator
That turned out nice. I did something similar on my '06, only in black instead of GM. Good job.
#4
Moderator
#5
Race Director
iTrader: (8)
Looks great!
It looks like the driver side decal isn't on right, though lol
It looks like the driver side decal isn't on right, though lol
#6
2021 RDX A SPEC
Thread Starter
yah..the driver side decal is on fine.. just the way the photo was taken. i'll keep it as is..see how it holds up. definitely cool to have the A-specs spin away with the large gaps between spokes, the 'acura' is really visible.
Trending Topics
#8
#11
Race Director
iTrader: (1)
I'd say it looks off though. There just isn't enough space to make it look right. But the GM was a good choice and it looks like you did a good job. Congrats.
#12
Moderator
Bullcrap. He didn't put "Brembo" stickers (or fake covers for that matter) on them. He put an "Acura" logo on an "Acura".
#13
And what was his reasoning for doing this? Because the better brakes available for his car have ACURA written on them. If the brembos didnt say ACURA do you think he would have done this little project? Thats the point I'm trying to make.
#15
Race Director
iTrader: (1)
And I'd say he did it for bling. Anyone who looks close enough to see the Acura letters is going to know they aren't brembos. He was just trying to dress it up a bit. And kudos to him for putting forth the effort.
#16
Moderator
He doesn't have to make a point for why he did what he did. Your point, however, still doesn't add up. All your point seems to be is to rag on someone in that very same persons thread.
And I'd say he did it for bling. Anyone who looks close enough to see the Acura letters is going to know they aren't brembos. He was just trying to dress it up a bit. And kudos to him for putting forth the effort.
And I'd say he did it for bling. Anyone who looks close enough to see the Acura letters is going to know they aren't brembos. He was just trying to dress it up a bit. And kudos to him for putting forth the effort.
#17
He doesn't have to make a point for why he did what he did. Your point, however, still doesn't add up. All your point seems to be is to rag on someone in that very same persons thread.
And I'd say he did it for bling. Anyone who looks close enough to see the Acura letters is going to know they aren't brembos. He was just trying to dress it up a bit. And kudos to him for putting forth the effort.
And I'd say he did it for bling. Anyone who looks close enough to see the Acura letters is going to know they aren't brembos. He was just trying to dress it up a bit. And kudos to him for putting forth the effort.
#18
Moderator
One does not "back up" their reasoning with faulty premises. That's a recipe for failure. You're 14 posts into your tenure here; learn the culture a bit before you start flailing about with your attitude.
#19
Race Director
iTrader: (1)
you've still got some Grwning up to do.
#20
Safety Car
iTrader: (11)
Wow that looks unbelievably tacky. Why would you want to attract more attention to 1-piston unattractive brake calipers? Why don't you paint them red while you're at it? There's nothing wrong with putting an Acura decal on stock brakes, but whether they look good is a different story.
As they all say: "If you like it, that's all that matters!"
As they all say: "If you like it, that's all that matters!"
Last edited by bforbrian; 07-29-2011 at 02:07 PM.
#21
Moderator
Now, if you want to talk about tacky, should we talk about neon-colored wheels?
The following users liked this post:
Mug (08-05-2011)
#22
2021 RDX A SPEC
Thread Starter
thanks for all the feedback/opinions fellas... exactly what i wanted to read. i painted the calipers recently and figured why not give this 'decal' mod a try.. in any case, i'll leave it on and see if it grows on me or annoys me... not that hard to remove it.... but the gunmetal paint with its 'gloss' looks great.
#23
Safety Car
iTrader: (11)
The orange wheels were loud and outrageous, I agree, but they were made by Volk Racing, right out the factory. I didn't buy a set of $3K wheels to paint them orange. None of their wheels are tacky. Tacky on my car? Some say yes, some say no. I can live with that.
You calling my wheel theme tacky is simply your opinion, lol; the OP was asking for ours.
Last edited by bforbrian; 07-29-2011 at 02:17 PM.
#24
Moderator
The gray is nice, but placing an acura decal on the caliper attracts more attention.
The orange wheels were loud and outrageous, I agree, but they were made by Volk Racing, right out the factory. I didn't buy a set of $3K wheels to paint them orange. None of their wheels are tacky. Tacky on my car? Some say yes, some say no. I can live with that.
The orange wheels were loud and outrageous, I agree, but they were made by Volk Racing, right out the factory. I didn't buy a set of $3K wheels to paint them orange. None of their wheels are tacky. Tacky on my car? Some say yes, some say no. I can live with that.
The following 2 users liked this post by ttribe:
cjTL (07-31-2011),
maharajamd (07-29-2011)
#26
Moderator
#27
Race Director
iTrader: (1)
#28
Gunmetal looks great with the wide-open space of the wheels man.
People can say what they want about the ACURA emblem. ......I think it dresses it up a little and draws your attention to the wheel, not necessarily to the fact it's a 1 piston caliper.
People can say what they want about the ACURA emblem. ......I think it dresses it up a little and draws your attention to the wheel, not necessarily to the fact it's a 1 piston caliper.
#29
Redwood Original
iTrader: (1)
wow this turned into a bunch of butthurt peoples comments. i think it looks ok, but kind of out of place. on the one pic it looked like the logo was bent or folded thats my only complaint. and you can clearly distinguish that your car does not have brembos either way, the brembo caliper is much longer than yours. i mean if it were my car, i wouldnt have done it but to each his own (plus i have a 6mt with brembos) :p
#30
ACURA604, I think it looks great. These guys criticizing, most likely have no initiative to do anything out of effort or creativity, but still they can always do it better!?! I agree that everyone has a right to post their thought's, but no need to be nasty! Hat's off to you bro, cool job!!
Last edited by Ricky Pounds; 07-29-2011 at 04:39 PM.
The following users liked this post:
CLtotheTL32 (07-30-2011)
#32
Pro
nice calipers.
Last edited by Steven Bell; 08-02-2011 at 10:07 PM. Reason: Cleaned-other comments are over the top...
#33
woah very mixed reactions. I dont care if people think they look like fake brembos, I like it. no different than putting type S wheels on a non- type S TL... actually, much better than that. dont let the haters get to ya. it looks good!
#35
Race Director
iTrader: (1)
ACURA604, I think it looks great. These guys criticizing, most likely have no initiative to do anything out of effort or creativity, but still they can always do it better!?! I agree that everyone has a right to post their thought's, but no need to be nasty! Hat's off to you bro, cool job!!
The following users liked this post:
bforbrian (07-29-2011)
#36
Safety Car
iTrader: (11)
ACURA604, I think it looks great. These guys criticizing, most likely have no initiative to do anything out of effort or creativity, but still they can always do it better!?! I agree that everyone has a right to post their thought's, but no need to be nasty! Hat's off to you bro, cool job!!
The following users liked this post:
CLtotheTL32 (07-30-2011)
#39
just noticed youre from BC.. now i've definitely got your back. us BC boys gotta stick together hahah