Busy Weekend-winterized Mom's 1 yr old car, debadge, leather treated, Xmas Tree
#1
www.colradodetail.com
Thread Starter
Busy Weekend-winterized Mom's 1 yr old car, debadge, leather treated, Xmas Tree
Its been a great 5days off. I decided to tackle a few things. First I detailed my moms accord. Washed, clayed, sealed, vacuum the works...she only wanted to pay me 5$ and hour....i would have made 25$ but i did it for free here are the before and afters...
AFTER
Then I Debadge my rear end. Got so excited i forgot to take before pictures....here are the results tho... BTW i wet sanded and polished only half the bumper and boy does it look better than brand new....look how good you can see my pants!
Then I started on treating the leather. I need to get better pictures but i think you can see the difference....Using Leather Honey...so far so good. Will do the other side tomorrow. only did passenger side seat and door.....for now
Then i finished up with putting up xmass with my pregnant wife....
Busy couple of days....But it was fun....
What do people think of the debadged rear end? My brother inlaw said i should do the TLS as well....thoughts??
AFTER
Then I Debadge my rear end. Got so excited i forgot to take before pictures....here are the results tho... BTW i wet sanded and polished only half the bumper and boy does it look better than brand new....look how good you can see my pants!
Then I started on treating the leather. I need to get better pictures but i think you can see the difference....Using Leather Honey...so far so good. Will do the other side tomorrow. only did passenger side seat and door.....for now
Then i finished up with putting up xmass with my pregnant wife....
Busy couple of days....But it was fun....
What do people think of the debadged rear end? My brother inlaw said i should do the TLS as well....thoughts??
#3
www.colradodetail.com
Thread Starter
I thought about that too, just leaving the TypeS...I might go that rout....i think i have seen a pic or two that way....
#4
Race Director
iTrader: (8)
Looked like a busy weekend indeed!
Nice job on the detail and +1 on removing the "TL" badge.
Nice job on the detail and +1 on removing the "TL" badge.
#5
www.colradodetail.com
Thread Starter
Trending Topics
#8
All About Trance
Also, what did you use to clean that engine bay? May need to do that to mine when Spring comes along.
#10
Senior Moderator
iTrader: (1)
#11
Instructor
I need to drive up to Loveland one of these days… spring maybe? I am not allowed to drive my car in the snow, which totally sucks out here.
By the way what products did you use on the Accord exterior/engine bay? It looks great– nice work!
By the way what products did you use on the Accord exterior/engine bay? It looks great– nice work!
Last edited by mynameisraj; 11-27-2011 at 10:27 PM.
#13
Everything but the A. Leaving the "type s" looks tacky and uneven IMO. But that's just my opinion. Also congrats on the baby. She looks around 7-8 months? Hope it comes out healthy brotha!
#15
Registered 3.5L Member
the Type-S one....
^ Not the best pics, but you get the idea.....
#16
Moderator
iTrader: (3)
Nice work sir! If you wanted to take it one step further, remove the TL and leave the Type-S badge where it currently is
Congrats on having the little one soon! What is the expected due date?
Congrats on having the little one soon! What is the expected due date?
#18
www.colradodetail.com
Thread Starter
Thanks everyone for the comments! My wifes due date is Dec 16th but according to our last doctor appointment she thinks it will happen this week! yikes....
For those who asked what did i use on my moms car here is what i use.
Adams Car wash
Sonax full effect wheel cleaner
Orange degreaser on the engine with various brushes
Finished up the engine bay with adams in and out spray and VRT
after claying the car i rinsed and dried it. Decided not to polish any of the scratches out since it is winter now and she does alot of high driving
then i used Menzerna Power lock sealant on the paint. Let it dry for 1-2hrs then buffed off.
Inside was vacuumed whiped down with soapy water and a rag then used Meguiar's quick interior
Finished up the windows with rainx sealant....going to try wolfs glass gaurd next time....
I like this..... looks good IMO...i also like nothing....that way dumb people think its a base model....hehe
For those who asked what did i use on my moms car here is what i use.
Adams Car wash
Sonax full effect wheel cleaner
Orange degreaser on the engine with various brushes
Finished up the engine bay with adams in and out spray and VRT
after claying the car i rinsed and dried it. Decided not to polish any of the scratches out since it is winter now and she does alot of high driving
then i used Menzerna Power lock sealant on the paint. Let it dry for 1-2hrs then buffed off.
Inside was vacuumed whiped down with soapy water and a rag then used Meguiar's quick interior
Finished up the windows with rainx sealant....going to try wolfs glass gaurd next time....
I like this..... looks good IMO...i also like nothing....that way dumb people think its a base model....hehe
Last edited by Steven Bell; 11-28-2011 at 09:13 PM. Reason: Merged Posts.
#19
Team Owner
iTrader: (2)
Join Date: Jan 2008
Location: Kansas City, MO (Overland Park, KS)
Posts: 36,545
Received 6,470 Likes
on
5,162 Posts
HFL, you've been a busy guy. And you're about to be busier on December 16th.
#22
www.colradodetail.com
Thread Starter
Thanks....but the front end is far from perfect...I would like the bumper hood and fenders painted....
Im pretty sure it will happen this week....so ill be busy guy sooner than expected....
Im pretty sure it will happen this week....so ill be busy guy sooner than expected....
#26
2016 Acura TLX
Congrats on the baby. I'd remove the TL and reposition the Type-S to the bottom corner of the trunk.
#30
www.colradodetail.com
Thread Starter
#32
www.colradodetail.com
Thread Starter
Pretty much thats it. I would we down the engine really well first then use your favorite degreaser. I let it dry before i use the in and out spray.... you can use compressed air i dont just bc i dont have a big enough air compressor. Power washer would be nice too but i also dont have one....yet
#34
All About Trance
^ Scroll up.
Thread
Thread Starter
Forum
Replies
Last Post