I was at first afraid of it looking cheesy, but after about 10 minutes I was done and I couldnt be happier. It was EXTREMELY easy, and is well worth it.









For some reason, my camera didn't like feel like capturing the amount of light. It is so much brighter in person, yet not too bright. Also, they look very blue but that is not the case, more of a clean white. And here is what I bought which were all perfect sizes.

For the Door Lights/Backseat Lights:


http://www.v-leds.com/Exterior-LED/C...-p4481039.html

For the Front Map Lights:


http://www.v-leds.com/Interior-LED/D...-p5168709.html

 

thanks for the part numbers and info. I have been wanting to do this for a while but always unsure of which one to get. Did you just buy two sets of the first one for the doors and the back seat lights? Stupid question i know....lol

 

I was in the same position you were, I've wanted to get these for awhile I just couldn't find anything cause it mainly consisted of expired ebay links. But yes, that is exactly what I did. If you are wanting to do your vanity lights too I would buy two pairs of each cause im almost 100% sure that the vanity lights are the same ones as the map lights. Im also going to buy a pair for my license plate but I have havent found out yet how to do it/what size to buy.

 

Looks good!

I'm gonna have to buy some LEDs myself haha

 

These are what I use in my license plate lights---over a year and still going strong.
http://www.v-leds.com/Exterior-LED/C...-p4481133.html
I think that since these bulbs 1) are lower wattage and 2) have a built in heatsink, they will last longer.

 

Pics of said LEDs?

 

ya i ended up buying two sets of lights, one pair for the doors and one pair for the back seat lights, and one pair for the map lights...completely forgot about the map lights for the visors...now its going to look stupid till i get those in....hahah all well just another reason to buy something else. Do you happen to know which ones they are to match the current ones that you have? im also going to get those license plate ones...slowly but surely...haha

 

Pics of the bulbs themselves can be found on the link I posted.

Here are some pics of the output:

 

Hi everyone, I didnt wanna make a new thread so I just wanted to confirm if Im ordering the right bulbs. Im sorry if its a lil noobish question but I dont know much about cars :-/
soo im ordering from superbrightleds:

License Plate:im ordering the 921x9 http://www.superbrightleds.com/cgi-b...s%2F921-x9.htm x2

Dome:x4 2 red 2 white(WLED-x6) http://www.superbrightleds.com/cgi-b...%2FWLED-x6.htm

Door: x2 red(T13x6 or x9?) http://www.superbrightleds.com/cgi-b...s%2FT13-x6.htm

Am i on the right page? also the door ones i wanted to b a little brighter. Or should i go with the size unctarheel did?

Thanks

 

The dome lights, door lights and license plate lights are all the same style bulb. The 921's you mentioned are for the reverse lights.

 

So I should get either WLED-x6 or T13x6? Which one would u suggest.

 

I would just go with the same size as me cause I had no fitment issues and they are plenty bright. If you were wanting to get red, that's fine just make it's the same size as what I got. I suggest either vleds or superbrightleds

 

just ordered the rest for glove box, arm rest, and trunk along with license plate....although i just realized i did forget to get the map lights above the visors....boo all well i never open those anyway...haha

 

okay i felt like i needed to have the complete set, so i bought the vanity lights too...

 

haha it's addicting...I've already started converting my wife's Murano too...

 

ya i know right, i got rid of my STI right before i was going to do the built motor and upgrade turbo...lol atleast there isnt too much out there for this car like subaru.

 

hey nice led,but is around your brake lights is carbon fiber

 

i think what your seeing is just the lighting.. my Type S has the same kind of look around the license plate area.

 

Bumping this back up but at least I'm searching. haha
I've searched through the V-Leds website and just wanted to make sure I'm buying the right ones.

These are the ones I found for the front map lights- http://www.v-leds.com/RED-6-LED-FLAN...-p6053723.html
(^ I doubled up on this so I would have some for the vanity lights by the visor?)\

These are the ones I found for the rear map lights and for the door puddle lights-http://www.v-leds.com/RED-X5-HIGH-POWER-LED-p6704683.html
(I would need to buy 3 sets of these to so I can have them in all 4 doors and in the rear map lights?)

Thanks for the help guys.

 

Honestly I think any 168/194 bulb fits in almost every location doors dome trunk dome license plate light and even reverse lights I personally used the old ones from a previous car. I got them from ijdmtoy

 

This is correct. People make it a little more complicated than it really is by buying different style 168/194 wedge LED's for each location in the car, but in reality, you could just buy like 5 pairs of the exact same style bulb and be done with it.

 

^
Does it matter if they're the panel style or the tower LED's?

 

^No, that's my point. The tower-style LED's are usually cheaper, so I'd just buy those for everything. Besides, I think the panel-style LED's are too bright....don't need to feel like I'm at the dentist every time the dome/map lights come on. The only panel-style LED I have in my car is the trunk light and the only reason I got it is because it was on clearance on VLED's site.

 

Looks good, I just orderd a bunch of 194 LEDs to do this myself, but man does that irk me when people put their registration sticker in the wrong place, see the indent on the top left and your sticker bottom right? Even worse when they put them all over the plate.