Stage 3 with upgraded muffler?
#361
Safety Car
iTrader: (3)
Originally Posted by ib18c1
hahaha
good idea mmmmm
damn i kinda wish i had my own shop though...sometimes i wish i could just yank the tools from my muffler man and do it myself....ive been to that shop over 40 times (past cars incl)
i might just invest in a welding torch....and buy prebent pipes...
but damn i dont have a high enough lift....meh ill just do it on jacks..ROFL jk...
good idea mmmmm
damn i kinda wish i had my own shop though...sometimes i wish i could just yank the tools from my muffler man and do it myself....ive been to that shop over 40 times (past cars incl)
i might just invest in a welding torch....and buy prebent pipes...
but damn i dont have a high enough lift....meh ill just do it on jacks..ROFL jk...
I don't have a lift either and just built an extension for my floor jack so that I can raise the car up a few inches more than usual.
Then I used cheap bottle jacks that I had laying around to hold up the sections and tack welded all the joints (all were overlap, I also bought a pipe stretcher to do that).
Then I'd unbolt it and finish welding off the car.
Doing mig welding is really pretty easy on overlapped 16ga. I never once came close to burning through and I am getting good penetration.
In the end, I paid as much for all of this as I would have for a Comptech exhaust. The welder was about $600 with the bottle and it was refurbished (Lincoln 175T) but I've also got a chain link fence to put up so it's going to come in handy for other things.
If you do decide to get a welder, don't go too low end. The duty cycle is an important thing to look at. I decided on 240V for that reason and just bought an extension cord so it reaches anywhere in my garage. If you get one with too low of a duty cycle, it'll be cutting out on you all of the time. I never had that happen using it in the mid power range.
#362
Banned
Originally Posted by stillhere153
um well he did straight pipe and it was bad ass... I have no idea where he bought that little welder but he also welded a roll cage on his gas car with it... I am really good at searching but cant find it (scratches his head)
#363
Former Sponsor
iTrader: (6)
Originally Posted by KN_TL
That's why I bought a welder.
I don't have a lift either and just built an extension for my floor jack so that I can raise the car up a few inches more than usual.
Then I used cheap bottle jacks that I had laying around to hold up the sections and tack welded all the joints (all were overlap, I also bought a pipe stretcher to do that).
Then I'd unbolt it and finish welding off the car.
Doing mig welding is really pretty easy on overlapped 16ga. I never once came close to burning through and I am getting good penetration.
In the end, I paid as much for all of this as I would have for a Comptech exhaust. The welder was about $600 with the bottle and it was refurbished (Lincoln 175T) but I've also got a chain link fence to put up so it's going to come in handy for other things.
If you do decide to get a welder, don't go too low end. The duty cycle is an important thing to look at. I decided on 240V for that reason and just bought an extension cord so it reaches anywhere in my garage. If you get one with too low of a duty cycle, it'll be cutting out on you all of the time. I never had that happen using it in the mid power range.
I don't have a lift either and just built an extension for my floor jack so that I can raise the car up a few inches more than usual.
Then I used cheap bottle jacks that I had laying around to hold up the sections and tack welded all the joints (all were overlap, I also bought a pipe stretcher to do that).
Then I'd unbolt it and finish welding off the car.
Doing mig welding is really pretty easy on overlapped 16ga. I never once came close to burning through and I am getting good penetration.
In the end, I paid as much for all of this as I would have for a Comptech exhaust. The welder was about $600 with the bottle and it was refurbished (Lincoln 175T) but I've also got a chain link fence to put up so it's going to come in handy for other things.
If you do decide to get a welder, don't go too low end. The duty cycle is an important thing to look at. I decided on 240V for that reason and just bought an extension cord so it reaches anywhere in my garage. If you get one with too low of a duty cycle, it'll be cutting out on you all of the time. I never had that happen using it in the mid power range.
![Spank](https://acurazine.com/forums/images/smilies/spank.gif)
So did you just buy prebent pipings then just cut out piece you did not need? or did you use straight pipes and have a bender?
errr i really need my own garage or something...need more space...
Thanks alot for all the info KN_TL
![Thumbs Up](https://acurazine.com/forums/images/smilies/thumbsup.gif)
Originally Posted by XxAfG786xX
i want your rims lol
![Wish](https://acurazine.com/forums/images/smilies/wish.gif)
#365
Ok so I decided to get another exhaust setup....damnit I'm turning into Tim![Doh](https://acurazine.com/forums/images/smilies/doh.gif)
I love the way it sounds now but the drone is killer and look isn't for my TL
Ok so not sure about looks but definitely rolled tips, either quads or just dual setup. Going for more the classy than the "performance" look since that's kinda what the rest of the car looks like.
I also want a SICK tone, something unique. I don't want deep or loud loud but something with a nice, even higher pitched(not ricer) tone.
Any suggestions? I want to really really think it out before I do this now haha
![Doh](https://acurazine.com/forums/images/smilies/doh.gif)
I love the way it sounds now but the drone is killer and look isn't for my TL
Ok so not sure about looks but definitely rolled tips, either quads or just dual setup. Going for more the classy than the "performance" look since that's kinda what the rest of the car looks like.
I also want a SICK tone, something unique. I don't want deep or loud loud but something with a nice, even higher pitched(not ricer) tone.
Any suggestions? I want to really really think it out before I do this now haha
![Spank](https://acurazine.com/forums/images/smilies/spank.gif)
#366
Former Sponsor
iTrader: (6)
Originally Posted by ballinfizzle89
Ok so I decided to get another exhaust setup....damnit I'm turning into Tim![Doh](https://acurazine.com/forums/images/smilies/doh.gif)
I love the way it sounds now but the drone is killer and look isn't for my TL
Ok so not sure about looks but definitely rolled tips, either quads or just dual setup. Going for more the classy than the "performance" look since that's kinda what the rest of the car looks like.
I also want a SICK tone, something unique. I don't want deep or loud loud but something with a nice, even higher pitched(not ricer) tone.
Any suggestions? I want to really really think it out before I do this now haha![Spank](https://acurazine.com/forums/images/smilies/spank.gif)
![Doh](https://acurazine.com/forums/images/smilies/doh.gif)
I love the way it sounds now but the drone is killer and look isn't for my TL
Ok so not sure about looks but definitely rolled tips, either quads or just dual setup. Going for more the classy than the "performance" look since that's kinda what the rest of the car looks like.
I also want a SICK tone, something unique. I don't want deep or loud loud but something with a nice, even higher pitched(not ricer) tone.
Any suggestions? I want to really really think it out before I do this now haha
![Spank](https://acurazine.com/forums/images/smilies/spank.gif)
![Dunno](https://acurazine.com/forums/images/smilies/dunno.gif)
lol jk
try...flowmasters?? i think chambered mufflers produce more of a tone rather than deepness....usually aftermarket mufflers are filled with sound deadening baffles which produce these deep sounds...oem mufflers are chambered which produce extraordinary sounds.....idk how flowmasters would work....but idk i see flowmasters on 100% usdm cars only
![Frown](https://acurazine.com/forums/images/smilies/frown.gif)
maybe u can buy oem mufflers off some other honda/ car and weld in rolled tips?? lol...other than that im utterly clueless
![Spanky](https://acurazine.com/forums/images/smilies/spankie.gif)
HAHA i see u have spanky too
![Wink](https://acurazine.com/forums/images/smilies/wink.gif)
#368
94 DC4 RS LSV/Turbo
iTrader: (1)
Join Date: Jul 2007
Location: New York City | Stuck in Traffic
Age: 38
Posts: 11,734
Likes: 0
Received 11 Likes
on
11 Posts
Jesus christ fizzle just when I thought we'd moved on to suspension you go and switch it up again... granted don't count me out... don't be surprised if I end up going with some nice polished tip quads...
![Wink](https://acurazine.com/forums/images/smilies/wink.gif)
#369
Former Sponsor
iTrader: (6)
Originally Posted by stillhere153
Jesus christ fizzle just when I thought we'd moved on to suspension you go and switch it up again... granted don't count me out... don't be surprised if I end up going with some nice polished tip quads... ![Wink](https://acurazine.com/forums/images/smilies/wink.gif)
![Wink](https://acurazine.com/forums/images/smilies/wink.gif)
![Spanky](https://acurazine.com/forums/images/smilies/spankie.gif)
![Scrib](https://acurazine.com/forums/images/smilies/cheer.gif)
well for one, ive moved on to suspension...after i install the XL muffler (as a resonator...calling it a day with the exhaust....spent wayyy to much money on it already
#371
Safety Car
iTrader: (3)
Originally Posted by ib18c1
oh wow, 600 isnt a bad investment, well prob for most of us who is known for switching exhausts alot ![Spank](https://acurazine.com/forums/images/smilies/spank.gif)
So did you just buy prebent pipings then just cut out piece you did not need? or did you use straight pipes and have a bender?
errr i really need my own garage or something...need more space...
Thanks alot for all the info KN_TL
agreed! Al stop hiding those hot rims...more pics![Wish](https://acurazine.com/forums/images/smilies/wish.gif)
![Spank](https://acurazine.com/forums/images/smilies/spank.gif)
So did you just buy prebent pipings then just cut out piece you did not need? or did you use straight pipes and have a bender?
errr i really need my own garage or something...need more space...
Thanks alot for all the info KN_TL
![Thumbs Up](https://acurazine.com/forums/images/smilies/thumbsup.gif)
agreed! Al stop hiding those hot rims...more pics
![Wish](https://acurazine.com/forums/images/smilies/wish.gif)
Then just used a big pipe cutter and sawzall to make everything fit. I spent an extra $100 on a pipe stretcher so that I could overlap the joints, install it unwelded in the car, jack it all up where I wanted it and then tacked it all while in place. Then I could complete the welds standing up!
I ended up messing up on an angle in the rear so I simply cut the overlap just below the original weld and was able to correct it with little effort.
I'm also working on a chain link fence so the welder is going to come in handy there as well. All of the piping is 16ga just like what I just worked with.
#372
94 DC4 RS LSV/Turbo
iTrader: (1)
Join Date: Jul 2007
Location: New York City | Stuck in Traffic
Age: 38
Posts: 11,734
Likes: 0
Received 11 Likes
on
11 Posts
dudes I am anti quads but have moved on to suspension as well... that doesn't mean I will go out and get some crazy stuff done...
whatever it will be will involve the hushpower resonator so that I won't have to worry about drone and kill it the first time...
total I spend $90 on stage 3 dynomax res included
$200 on the skunk2 mufflers 100 each
$90 to put em in
and another 50 to put the stock mid muff back on w./out the dynomax res
not too bad for a custom catback... anything under $500 works for me
whatever it will be will involve the hushpower resonator so that I won't have to worry about drone and kill it the first time...
total I spend $90 on stage 3 dynomax res included
$200 on the skunk2 mufflers 100 each
$90 to put em in
and another 50 to put the stock mid muff back on w./out the dynomax res
not too bad for a custom catback... anything under $500 works for me
![Smile](https://acurazine.com/forums/images/smilies/smile.gif)
#374
Former Sponsor
iTrader: (6)
ive been a frequent customer at my muffler shop since i had my first car (back in '04)
magnaflow 14"SS mufflers x2 = $235
magnaflow 4" slash tips x4 = $120
magnaflow ypipe = $20
magnaflow 11" mid muffler = $45
magnaflow XL muffler (as a resonator) = $35
i cant really calc labor in there since ive swapped set ups so many times....but i do get a hooked up
Faiz...im havin a bitchin ofa time taking the suspension out....im really so out of shape these days
i usually do all ofmy work in the rsx...but now...i call quits...lol ima just goto the shop and have them do a swap tomorow
magnaflow 14"SS mufflers x2 = $235
magnaflow 4" slash tips x4 = $120
magnaflow ypipe = $20
magnaflow 11" mid muffler = $45
magnaflow XL muffler (as a resonator) = $35
i cant really calc labor in there since ive swapped set ups so many times....but i do get a hooked up
![Too Cool](https://acurazine.com/forums/images/smilies/toocool.gif)
Faiz...im havin a bitchin ofa time taking the suspension out....im really so out of shape these days
![Frown](https://acurazine.com/forums/images/smilies/frown.gif)
#375
Former Sponsor
iTrader: (6)
but total spent on exhaust for shits n giggles.....
stage 3 univ. resonator = $40
Magnaflow 11" muffler = $45
Tanabe Hyper Mufflers x2 = $300
magnaflow 14"SS mufflers x2 = $235
magnaflow 3.5" tips x4 = $100
magnaflow 4" slash tips x4 = $120
magnaflow ypipe = $20
magnaflow 11" mid muffler = $45
magnaflow XL muffler (as a resonator) = $35
so thats around 940 spent...
total labor prob 200 so 1140 HAH! jeez but then again i sold Tom some of my muffler stuff so 900ish
sucks to be picky and indecisive
stage 3 univ. resonator = $40
Magnaflow 11" muffler = $45
Tanabe Hyper Mufflers x2 = $300
magnaflow 14"SS mufflers x2 = $235
magnaflow 3.5" tips x4 = $100
magnaflow 4" slash tips x4 = $120
magnaflow ypipe = $20
magnaflow 11" mid muffler = $45
magnaflow XL muffler (as a resonator) = $35
so thats around 940 spent...
![Why Me](https://acurazine.com/forums/images/smilies/whyme.gif)
total labor prob 200 so 1140 HAH! jeez but then again i sold Tom some of my muffler stuff so 900ish
sucks to be picky and indecisive
#378
Banned
Originally Posted by enigmaos
here is the vid clip of TheWanderer's setup (07 TL - S with FlowMaster and Stage 3):
http://www.youtube.com/watch?v=qcc9fsK7tPc
http://www.youtube.com/watch?v=qcc9fsK7tPc
![Tomato](https://acurazine.com/forums/images/smilies/tomato.gif)
#379
Safety Car
iTrader: (1)
Originally Posted by ib18c1
but total spent on exhaust for shits n giggles.....
stage 3 univ. resonator = $40
Magnaflow 11" muffler = $45
Tanabe Hyper Mufflers x2 = $300
magnaflow 14"SS mufflers x2 = $235
magnaflow 3.5" tips x4 = $100
magnaflow 4" slash tips x4 = $120
magnaflow ypipe = $20
magnaflow 11" mid muffler = $45
magnaflow XL muffler (as a resonator) = $35
so thats around 940 spent...
total labor prob 200 so 1140 HAH! jeez but then again i sold Tom some of my muffler stuff so 900ish
sucks to be picky and indecisive
stage 3 univ. resonator = $40
Magnaflow 11" muffler = $45
Tanabe Hyper Mufflers x2 = $300
magnaflow 14"SS mufflers x2 = $235
magnaflow 3.5" tips x4 = $100
magnaflow 4" slash tips x4 = $120
magnaflow ypipe = $20
magnaflow 11" mid muffler = $45
magnaflow XL muffler (as a resonator) = $35
so thats around 940 spent...
![Why Me](https://acurazine.com/forums/images/smilies/whyme.gif)
total labor prob 200 so 1140 HAH! jeez but then again i sold Tom some of my muffler stuff so 900ish
sucks to be picky and indecisive
![Thumbs Up](https://acurazine.com/forums/images/smilies/thumbsup.gif)
by the way, check the vendor section for the exhaust update.
![](http://i43.photobucket.com/albums/e358/flydealz/TIPScloseup.jpg)
#380
Former Sponsor
iTrader: (6)
Originally Posted by aznbo187
lol, that looks familiar to my "exhaust" scratch sheet a while back, going back and fourth with several different mufflers trying to find the perfect one. glad to see a fellow exhaust-addict in here
by the way, check the vendor section for the exhaust update.
![](http://i43.photobucket.com/albums/e358/flydealz/TIPScloseup.jpg)
![Thumbs Up](https://acurazine.com/forums/images/smilies/thumbsup.gif)
by the way, check the vendor section for the exhaust update.
![](http://i43.photobucket.com/albums/e358/flydealz/TIPScloseup.jpg)
![Spanky](https://acurazine.com/forums/images/smilies/spankie.gif)
alright...so who wants my custom magnaflow quad cat back hahaha
edit: hey Michael, maybe you should produce just axel backs for some of us ^_^ jk...cant wait to see em in person....any plans on preview party day? lol
#382
Safety Car
iTrader: (1)
Originally Posted by ib18c1
OMG!!!! THOSE ARE DROP DEAD SEX!!!!!!!
x100
alright...so who wants my custom magnaflow quad cat back hahaha
edit: hey Michael, maybe you should produce just axel backs for some of us ^_^ jk...cant wait to see em in person....any plans on preview party day? lol
![Spanky](https://acurazine.com/forums/images/smilies/spankie.gif)
alright...so who wants my custom magnaflow quad cat back hahaha
edit: hey Michael, maybe you should produce just axel backs for some of us ^_^ jk...cant wait to see em in person....any plans on preview party day? lol
#385
haahaah So all of a sudden Al is down with quads?!!? ahahha he was so anti quads he had them REMOVED![Doh](https://acurazine.com/forums/images/smilies/doh.gif)
BTW I heard the stromung on a legend..sounds nice..check it out
http://youtube.com/watch?v=0hwA7mxPd24
![Doh](https://acurazine.com/forums/images/smilies/doh.gif)
BTW I heard the stromung on a legend..sounds nice..check it out
http://youtube.com/watch?v=0hwA7mxPd24
#386
#389
Oh shit rele? That legend sound badass!
http://youtube.com/watch?v=Yhz_h4XHdNk
So does that Audi with the Remus exhaust...which is $$ too![Doh](https://acurazine.com/forums/images/smilies/doh.gif)
http://youtube.com/watch?v=Yhz_h4XHdNk
So does that Audi with the Remus exhaust...which is $$ too
![Doh](https://acurazine.com/forums/images/smilies/doh.gif)
![Why Me](https://acurazine.com/forums/images/smilies/whyme.gif)
#396
94 DC4 RS LSV/Turbo
iTrader: (1)
Join Date: Jul 2007
Location: New York City | Stuck in Traffic
Age: 38
Posts: 11,734
Likes: 0
Received 11 Likes
on
11 Posts
those do look better and they are sliced...
I hope they won't look overly small, but should work... I guess you are going to use the stock mufflers for that correct?
I hope they won't look overly small, but should work... I guess you are going to use the stock mufflers for that correct?
#399
Former Sponsor
iTrader: (6)
Originally Posted by ballinfizzle89
Damn the base aspec lip! The tips have to go in at an angle and close up it looks like theyre a little sideways![Why Me](https://acurazine.com/forums/images/smilies/whyme.gif)
Alright..just going to do single rolled tips I guesss......or porsche tips![Naughty](https://acurazine.com/forums/images/smilies/naughty.gif)
![Why Me](https://acurazine.com/forums/images/smilies/whyme.gif)
Alright..just going to do single rolled tips I guesss......or porsche tips
![Naughty](https://acurazine.com/forums/images/smilies/naughty.gif)
LOL do the porsche tips Faiz! no one has done it yet!
those tips alone are the price of 2 magnaflow mufflers LMAO