RV6 complete Exhaust System!!!
#44
Suzuka Master
In cabin vid!!!
#45
10th Gear
@bostonsilvertypes, thanks man! I wanna get the wheels done since the little old lady i bought mine off of bent 2 of my stock wheels and the front right lower control arm. Who does that!? But definitely this exhaust is on the shortlist to buy.
#46
Racer
that drive-by clip is just sex to my ears. I keep replaying it over and over again, really hope I get mine soon. So when can we expect the in-car vid? I'm hoping that it'll be one of those exhausts that is bearable during everyday driving and make everyone turn their heads when you gun it
Last edited by Ch33sE1; 06-19-2011 at 02:26 PM.
The following users liked this post:
BostonSilverTypeS (06-23-2011)
#47
10th Gear
I came across a base TL today while driving and it had a different exhaust on it... Didn't sound anywhere near as good and i still burned him.... So needless to say I really want this now.
#48
Burning Brakes
Thread Starter
did you scrape at the same spot... I also got a new scrape right after the resonator I have a small scrape there as well...(Northeast roads and driveways suck!!)
LOL...I'm not a fan of Bridgestone tires...I like my Nitto INVO's..
yeah I still can't believe it's coming from my car...I even had a older guy with an E90 M3(V8), come and tell me and I quote ""that is the nicest exhaust sound I've ever heard coming from a Japanese car""" ...my thinking is hmmm you havent heard a GT-R then or a NSX or 350z/G35!!...but still pretty interesting how the exhaust gets noticed from someone driving an M3(which btw his exhaust also sounded amazing he had the Corsa rear axle back muffler(sweet sweet)
But yeah I have some in cabin video's but i need to post them up as soon as I get a chance. I will try posting it up later today!
LOL...I'm not a fan of Bridgestone tires...I like my Nitto INVO's..
that drive-by clip is just sex to my ears. I keep replaying it over and over again, really hope I get mine soon. So when can we expect the in-car vid? I'm hoping that it'll be one of those exhausts that is bearable during everyday driving and make everyone turn their heads when you gun it
But yeah I have some in cabin video's but i need to post them up as soon as I get a chance. I will try posting it up later today!
#53
Burning Brakes
Thread Starter
Sry for delay guys I will have incab video up and also I'm trying to get a video in tunnel as well this weekend!
#54
contemplating future mods
iTrader: (4)
1. While stopped in the tunnel rev the car a few times
2. Run through the gears in said tunnel
3. If you are unable to stop in the tunnel, be sure to downshift!!! I was in 3rd, but apparently 2nd would have been better.
Maybe if you do it right, the rest of acurazine won't complain
I guess im going to make another attempt. I'm sure your tunnel drive through will satisfy the masses. GL
The following users liked this post:
BostonSilverTypeS (06-28-2011)
#55
Burning Brakes
Thread Starter
will do morrisey! I will def try to get a tunnel video this weekend..I have a good stretch of tunnel here in Boston so I will try to head out there late at night for a run!!!
Until then here is one on my way to work!!
Enjoy and yes don't mind beginning the road is very bumpy
http://www.youtube.com/watch?v=1WasRtTBFmY
Until then here is one on my way to work!!
Enjoy and yes don't mind beginning the road is very bumpy
http://www.youtube.com/watch?v=1WasRtTBFmY
#56
Burning Brakes
Thread Starter
onefastmachine like I said I love my Nitto's lol!
#57
Burning Brakes
Thread Starter
and 1 more in town driving home from work
http://www.youtube.com/watch?v=XDTkepdTDxI
....Last one I will post after this will hopefully be in tunnel going thru gears 1,2,3
http://www.youtube.com/watch?v=XDTkepdTDxI
....Last one I will post after this will hopefully be in tunnel going thru gears 1,2,3
The following users liked this post:
BostonSilverTypeS (06-29-2011)
#59
I'm The Nickel City Kid.
wOw, that exhaust looks amazing on the car! Nice pictures as well.
Were there any fitment issuses?
I want to get this exhaust, i just dont want to wait 2 months.
Were there any fitment issuses?
I want to get this exhaust, i just dont want to wait 2 months.
#60
Burning Brakes
Thread Starter
@ Acon
Fitment is spot on and 2months is well worth the wait as the first batch folks waited almost a year for this exhaust
#62
Burning Brakes
Thread Starter
Here it is FINALLY!!!(week later lol) tunnel clip enjoy!!
http://www.youtube.com/watch?v=22RAN8GRzSg
http://www.youtube.com/watch?v=22RAN8GRzSg
The following users liked this post:
BostonSilverTypeS (07-08-2011)
The following users liked this post:
BostonSilverTypeS (08-30-2011)
#66
Burning Brakes
Thread Starter
yeah that was Ted williams tunnel...there are a bunch of tunnels that go under downtown boston around airport, I wish I just had time during the night to do this when the roads are completely empty, but either way it will do!!
wheneva you come thru Boston hit me up and we can cruise thru those tunnels....the video clip as you also know does no justice to the actual sound in person
wheneva you come thru Boston hit me up and we can cruise thru those tunnels....the video clip as you also know does no justice to the actual sound in person
The following users liked this post:
BostonSilverTypeS (08-30-2011)
#68
Racer
This exhaust sends tingles down my spine everytime i rev past 3000 rpms! And it dumps a load of gas when u let off the throttle at around 2000 too and creates a little backfire noise, ABSOLUTELY AMAZING!!!
Last edited by Ch33sE1; 07-11-2011 at 02:09 PM.
The following users liked this post:
BostonSilverTypeS (07-14-2011)
#72
Burning Brakes
Thread Starter
The following users liked this post:
BostonSilverTypeS (08-30-2011)
#74
Burning Brakes
Thread Starter
here is a new video after getting the JnR ECU tune!!! on the dyno!!
Enjoy!!!
Enjoy!!!
#75
Instructor
iTrader: (2)
this sounds nice great job!!
i have a noob question..i thought its just pcd's to jpipe to exhaust....where does the 3rd cat come in? and when you said test pipe...is that to replace the 3rd cat? you mentioned it was from RV6 but i dont see it on their list of parts, unless this is something that is discontinued or custom...
i have a noob question..i thought its just pcd's to jpipe to exhaust....where does the 3rd cat come in? and when you said test pipe...is that to replace the 3rd cat? you mentioned it was from RV6 but i dont see it on their list of parts, unless this is something that is discontinued or custom...
#76
Burning Brakes
Thread Starter
this sounds nice great job!!
i have a noob question..i thought its just pcd's to jpipe to exhaust....where does the 3rd cat come in? and when you said test pipe...is that to replace the 3rd cat? you mentioned it was from RV6 but i dont see it on their list of parts, unless this is something that is discontinued or custom...
i have a noob question..i thought its just pcd's to jpipe to exhaust....where does the 3rd cat come in? and when you said test pipe...is that to replace the 3rd cat? you mentioned it was from RV6 but i dont see it on their list of parts, unless this is something that is discontinued or custom...
#77
Former Sponsor
here is a new video after getting the JnR ECU tune!!! on the dyno!!
Enjoy!!!
http://www.youtube.com/watch?v=sKXg8...eature=related
Enjoy!!!
http://www.youtube.com/watch?v=sKXg8...eature=related
#78
Burning Brakes
Thread Starter
The following users liked this post:
BostonSilverTypeS (01-17-2012)
#80
Thanks
I realize this thread hasn't had much movement in the last couple months, but I had to say thanks to Boston... I just threw down my deposit for the 2nd batch - First real mod other than stoptech slotted rotors and stoptech pads all around. The videos were true inspiration and a huge help.
I've got family all around Boston/the Cape so I'll have to keep an ear open for that sweet type-s's rear when I visit.
Cheers
I've got family all around Boston/the Cape so I'll have to keep an ear open for that sweet type-s's rear when I visit.
Cheers
The following users liked this post:
BostonSilverTypeS (03-20-2012)