Ported/Polished Upper Intake Manifold and Runners!
#121
Three Wheelin'
Thread Starter
iTrader: (3)
Guys stop filling this thread full of bull*shit negative suggestions. If the work is done right this mod gives gains if proper intake an exhaust mods are done. I'm running Stg1 tuned 09+ wrx's off the road from a 40 roll, and I'm a 5at. Youtube.com/gerzand
Cucu messaged me on facebook a few weeks ago because he was going to the track the next day but it got postponed for some personal issues. I`ll ask him again, but no guarantees. Just do the work and u won't have to depend on other people because ur too pussed out to spend a few bucks to find out. /rant
Cucu messaged me on facebook a few weeks ago because he was going to the track the next day but it got postponed for some personal issues. I`ll ask him again, but no guarantees. Just do the work and u won't have to depend on other people because ur too pussed out to spend a few bucks to find out. /rant
#122
^ ummmm I was just giving a honest opinion since I DO have pnp'd runners and manifold.. I mean I'm sure it made a difference but not drastically to say it was thee best mod.
I have A fully bolted j30a4 6mt and building a j36...
I have A fully bolted j30a4 6mt and building a j36...
#125
Former Whyner
#127
Former Whiner
Probably true
yeah... okay...
Guys stop filling this thread full of bull*shit negative suggestions. If the work is done right this mod gives gains if proper intake an exhaust mods are done. I'm running Stg1 tuned 09+ wrx's off the road from a 40 roll, and I'm a 5at. Youtube.com/gerzand
Cucu messaged me on facebook a few weeks ago because he was going to the track the next day but it got postponed for some personal issues. I`ll ask him again, but no guarantees. Just do the work and u won't have to depend on other people because ur too pussed out to spend a few bucks to find out. /rant
Cucu messaged me on facebook a few weeks ago because he was going to the track the next day but it got postponed for some personal issues. I`ll ask him again, but no guarantees. Just do the work and u won't have to depend on other people because ur too pussed out to spend a few bucks to find out. /rant
#128
Former Whiner
#129
J36Twingt28r's,nextgt30r
on his youtube video, he posted a comment that he runs a 13.8 1/4 mile time. 13.3 i can't see happening unless he gets up to 300whp with the "tl diet"
#130
Former Whyner
#131
Green Machine
iTrader: (3)
#132
FL 04 dgp TL
Join Date: Jan 2008
Location: sarasota, florida
Age: 41
Posts: 241
Likes: 0
Received 3 Likes
on
2 Posts
bro i think your underestimating your car. i was reading on the qtr mile compilation page and there are acuras on there with less mods than you have and they are running mid 13's all motor
13.3?! Thanks for the compliment Eric, but hell no! In a AWD or RWD maybe. I would be lucky to get less than 2.4 for reaction time; have to practice on my launches. I'm pretty sure I can get just under 14 though. One of these days I will make it to a 1/4 track; there isn't any close by.
#135
FL 04 dgp TL
Join Date: Jan 2008
Location: sarasota, florida
Age: 41
Posts: 241
Likes: 0
Received 3 Likes
on
2 Posts
yeah they have a paddle shift auto and a steptronic auto. if it was the coupe 335i it has a twin turbo. sick car. nice job on pulling away from him. go to the track, i am so interested in what your car does in the 1/4 mile. it will give me motivation to do the pnp mods.
#138
Green Machine
iTrader: (3)
Good call on that.
I understand your point about the oem tl injectors never being pushed to maximum. This applies to 99.8% of people, even those who plan to install every bolt-on on their TL or even PnP a bit. However, as in my case, it all depends how much work you have done. I picked up a set of RDX injectors for when my motor is bolted back up in the spring with new heads and all the goodies. I'll need the extra fuel![Smile](https://acurazine.com/forums/images/smilies/smile.gif)
I understand your point about the oem tl injectors never being pushed to maximum. This applies to 99.8% of people, even those who plan to install every bolt-on on their TL or even PnP a bit. However, as in my case, it all depends how much work you have done. I picked up a set of RDX injectors for when my motor is bolted back up in the spring with new heads and all the goodies. I'll need the extra fuel
![Smile](https://acurazine.com/forums/images/smilies/smile.gif)
#139
takin care of Business in
iTrader: (5)
Join Date: Jan 2008
Location: Kansas City, MO
Age: 40
Posts: 30,994
Received 4,732 Likes
on
4,064 Posts
bringing the thread back from the dead.....
any dyno numbers ?
i broke 2 intake manifold cover bolts in the intake manifold....the quote am getting to get the bolts extracted is $250 ish....so am thinking of getting a new intake manifold....OEM or PnP....
if anyone on here wanna sell his hit me up....got cash in hand....
any dyno numbers ?
i broke 2 intake manifold cover bolts in the intake manifold....the quote am getting to get the bolts extracted is $250 ish....so am thinking of getting a new intake manifold....OEM or PnP....
if anyone on here wanna sell his hit me up....got cash in hand....
#140
Chapter Leader (NY/NJ)
iTrader: (10)
yo they are easy to remove. Same thing happened to me. eithr home depot screw extracter for like 10 bucks or depending where they broke, other things.
Take a pic let me see. no need for a new IM cuz of that. when i broke mine a little tab stayed and i thought it was going to be a bitch to remove. i bought the screw extractors and when i went to use it, i literally with my finger just spun the tab of the bolt to remove it like if i had a screwdriver on it. the head breaks off easy and before any real pressure goes into the threaded part of the IM.
Take a pic let me see. no need for a new IM cuz of that. when i broke mine a little tab stayed and i thought it was going to be a bitch to remove. i bought the screw extractors and when i went to use it, i literally with my finger just spun the tab of the bolt to remove it like if i had a screwdriver on it. the head breaks off easy and before any real pressure goes into the threaded part of the IM.
#141
takin care of Business in
iTrader: (5)
Join Date: Jan 2008
Location: Kansas City, MO
Age: 40
Posts: 30,994
Received 4,732 Likes
on
4,064 Posts
the bolt's head broke off....the half is in the intake manifold and half in my hand ![Sad](https://acurazine.com/forums/images/smilies/sad.gif)
lemme try to bolt extractor today....thanks a ton for the![2 Cents](https://acurazine.com/forums/images/smilies/2cents.gif)
will take a pic and put it up later....
![Sad](https://acurazine.com/forums/images/smilies/sad.gif)
lemme try to bolt extractor today....thanks a ton for the
![2 Cents](https://acurazine.com/forums/images/smilies/2cents.gif)
will take a pic and put it up later....
#142
Chapter Leader (NY/NJ)
iTrader: (10)
Anytime. hopefully everything works out. depending on how the screw broke, you could even just take a small flathead and twist the broke bolt off. take pics when you can even if would a phone lol
#143
All motor
Damn swoosh! I didn't know that's why you PM'd me! I hope everything works out and you can fix it.
![Thumbs Up](https://acurazine.com/forums/images/smilies/thumbsup.gif)
#145
takin care of Business in
iTrader: (5)
Join Date: Jan 2008
Location: Kansas City, MO
Age: 40
Posts: 30,994
Received 4,732 Likes
on
4,064 Posts
yeah (if you were referring to me)....its a whistle that you hear at low rpm and idle....the minute you step on it it goes away....
![Why Me](https://acurazine.com/forums/images/smilies/whyme.gif)
#146
takin care of Business in
iTrader: (5)
Join Date: Jan 2008
Location: Kansas City, MO
Age: 40
Posts: 30,994
Received 4,732 Likes
on
4,064 Posts
cant wait
![Ecstatic](https://acurazine.com/forums/images/smilies/ecstatic.gif)
#147
Senior Moderator
Lets keep it civil here guys
#149
takin care of Business in
iTrader: (5)
Join Date: Jan 2008
Location: Kansas City, MO
Age: 40
Posts: 30,994
Received 4,732 Likes
on
4,064 Posts
i might get a dyno after getting an exhaust....another couple months....got some going on ![Ninja](https://acurazine.com/forums/images/smilies/ninja.gif)
pnp intake mani
pnp runner
rv6 pcd v2 ceramic coated inside out
exhaust (coming)
couple other mods on its way
![Ninja](https://acurazine.com/forums/images/smilies/ninja.gif)
pnp intake mani
pnp runner
rv6 pcd v2 ceramic coated inside out
exhaust (coming)
couple other mods on its way
![Thumbs Up](https://acurazine.com/forums/images/smilies/thumbsup.gif)
#151
takin care of Business in
iTrader: (5)
Join Date: Jan 2008
Location: Kansas City, MO
Age: 40
Posts: 30,994
Received 4,732 Likes
on
4,064 Posts
its cool dude.....pros of having a desk job LOL....
well yes i did get the mani from Gerz....I installed the mani along with pcd's so well I felt a huge difference....i was spinning 1st and 2nd....even with Innovative mounts![what](https://acurazine.com/forums/images/smilies/what.gif)
but also i felt huge low end loss....when ~20mph and in 3rd....my car used to pull hard....and now it just doesnt pull as well....
so great top end 3K rpm +....and sucky low end....i hope this gets better after installing the runners and exhuast.....
well yes i did get the mani from Gerz....I installed the mani along with pcd's so well I felt a huge difference....i was spinning 1st and 2nd....even with Innovative mounts
![what](https://acurazine.com/forums/images/smilies/what.gif)
but also i felt huge low end loss....when ~20mph and in 3rd....my car used to pull hard....and now it just doesnt pull as well....
so great top end 3K rpm +....and sucky low end....i hope this gets better after installing the runners and exhuast.....
#153
Chapter Leader (NY/NJ)
iTrader: (10)
its cool dude.....pros of having a desk job LOL....
well yes i did get the mani from Gerz....I installed the mani along with pcd's so well I felt a huge difference....i was spinning 1st and 2nd....even with Innovative mounts![what](https://acurazine.com/forums/images/smilies/what.gif)
but also i felt huge low end loss....when ~20mph and in 3rd....my car used to pull hard....and now it just doesnt pull as well....
so great top end 3K rpm +....and sucky low end....i hope this gets better after installing the runners and exhuast.....
well yes i did get the mani from Gerz....I installed the mani along with pcd's so well I felt a huge difference....i was spinning 1st and 2nd....even with Innovative mounts
![what](https://acurazine.com/forums/images/smilies/what.gif)
but also i felt huge low end loss....when ~20mph and in 3rd....my car used to pull hard....and now it just doesnt pull as well....
so great top end 3K rpm +....and sucky low end....i hope this gets better after installing the runners and exhuast.....
Dude im on AZ atleast 5 hours a day. i read the whole TL Diet thread today and just had to get off. at work "training" this week so ima be on alot myself lol. Cant do this shit everyday, i wouldn't get work done at all.
Wow, you feel low end loss. i thought everyone's thing on the pnp mani was gain on the whole curve. i know they said top end really gained. The runners should help with that. Dyno it now before the exhaust and runners so you could it compare to those mods.
#154
Three Wheelin'
Thread Starter
iTrader: (3)
Unemployed = build on hold for now, though a fully assembled set of factory heads are still sitting in my basement just begging to be sent out for a full build.
It will come soon enough....just gotta land a job![Thumbs Up](https://acurazine.com/forums/images/smilies/thumbsup.gif)
Updates on ur head swap from ages ago? I want to talk to you over the phone or XBL or somethin sometime man....cuz ill be doing that sometime soon and need all the tips I can get!
It will come soon enough....just gotta land a job
![Thumbs Up](https://acurazine.com/forums/images/smilies/thumbsup.gif)
Updates on ur head swap from ages ago? I want to talk to you over the phone or XBL or somethin sometime man....cuz ill be doing that sometime soon and need all the tips I can get!
#155
Three Wheelin'
Thread Starter
iTrader: (3)
its cool dude.....pros of having a desk job LOL....
well yes i did get the mani from Gerz....I installed the mani along with pcd's so well I felt a huge difference....i was spinning 1st and 2nd....even with Innovative mounts![what](https://acurazine.com/forums/images/smilies/what.gif)
but also i felt huge low end loss....when ~20mph and in 3rd....my car used to pull hard....and now it just doesnt pull as well....
so great top end 3K rpm +....and sucky low end....i hope this gets better after installing the runners and exhuast.....
well yes i did get the mani from Gerz....I installed the mani along with pcd's so well I felt a huge difference....i was spinning 1st and 2nd....even with Innovative mounts
![what](https://acurazine.com/forums/images/smilies/what.gif)
but also i felt huge low end loss....when ~20mph and in 3rd....my car used to pull hard....and now it just doesnt pull as well....
so great top end 3K rpm +....and sucky low end....i hope this gets better after installing the runners and exhuast.....
BTW, your RDX spacer has been uninstalled this whole time too, right? Otherwise that would be hurting you even worse, even currently.
#156
Chapter Leader (NY/NJ)
iTrader: (10)
Unemployed = build on hold for now, though a fully assembled set of factory heads are still sitting in my basement just begging to be sent out for a full build.
It will come soon enough....just gotta land a job![Thumbs Up](https://acurazine.com/forums/images/smilies/thumbsup.gif)
Updates on ur head swap from ages ago? I want to talk to you over the phone or XBL or somethin sometime man....cuz ill be doing that sometime soon and need all the tips I can get!
It will come soon enough....just gotta land a job
![Thumbs Up](https://acurazine.com/forums/images/smilies/thumbsup.gif)
Updates on ur head swap from ages ago? I want to talk to you over the phone or XBL or somethin sometime man....cuz ill be doing that sometime soon and need all the tips I can get!
sorry to hear about that bro. you can always sells switchback sidemarkers
![Tomato](https://acurazine.com/forums/images/smilies/tomato.gif)
i'll pm you my contact info.
#157
takin care of Business in
iTrader: (5)
Join Date: Jan 2008
Location: Kansas City, MO
Age: 40
Posts: 30,994
Received 4,732 Likes
on
4,064 Posts
Dude im on AZ atleast 5 hours a day. i read the whole TL Diet thread today and just had to get off. at work "training" this week so ima be on alot myself lol. Cant do this shit everyday, i wouldn't get work done at all.
Wow, you feel low end loss. i thought everyone's thing on the pnp mani was gain on the whole curve. i know they said top end really gained. The runners should help with that. Dyno it now before the exhaust and runners so you could it compare to those mods.
Wow, you feel low end loss. i thought everyone's thing on the pnp mani was gain on the whole curve. i know they said top end really gained. The runners should help with that. Dyno it now before the exhaust and runners so you could it compare to those mods.
well am on stock exhaust and got the RDX spacer plus i have the butterfly removed from the intake mani....
for the dyno i was thinking of all the stuff am gonna have and then what i dont want....example
dyno1 (day1): pnp mani without butterfly, intake mods, pnp runners, rv6 pcd, full exhaust, rdx spacer installed
dyno2 (day2): everything same but NO rdx spacer
dyno3 (day3): NO rdx spacer and butterfly installed
dyno4 (day4): rdx spacer installed and butterfly installed
so that i know what curve looks the best and hold onto those....again the ECU will be reset everyday.....and will make sure i dyno at the same climatic conditions and all the jazz....
but this will be a bit since i just added a new member to the family.....the sexy TL gets to sleep next to a CBR600rr....niceness
![Thumbs Up](https://acurazine.com/forums/images/smilies/thumbsup.gif)
holy crap, I didnt realize you were doing all this work and still on a stock exhaust! You will feel it open up for sure, hehe. Cant wait to hear the expression in your voice when you get it all done dude!
BTW, your RDX spacer has been uninstalled this whole time too, right? Otherwise that would be hurting you even worse, even currently.
BTW, your RDX spacer has been uninstalled this whole time too, right? Otherwise that would be hurting you even worse, even currently.
#159
takin care of Business in
iTrader: (5)
Join Date: Jan 2008
Location: Kansas City, MO
Age: 40
Posts: 30,994
Received 4,732 Likes
on
4,064 Posts
a little more low end push....and i mean a little....
but you also have to see am running stock jpipe and exhaust being pnp thro my way so that could be the reason as well.....
but you also have to see am running stock jpipe and exhaust being pnp thro my way so that could be the reason as well.....
#160
Chapter Leader (NY/NJ)
iTrader: (10)
i'll see. im completely bolted up with Type S heads and exhaust. Torque for days, low-end thru top-end across all gears feels crazy. im waiting for a cool day to dyno. I dyno'ed last week @ 94F and without cooling my engine to see my low low numers and i was still happy with it. i'll put them out once i get my high numbers