Need help designing a single 2.5" exhaust
#1
Cruisin'
Thread Starter
Need help designing a single 2.5" exhaust
Hey guys, looking for help designing my exhaust for my 05. I'm planning on getting the RV6 test pipes and one of the available J pipes, maybe the new ATLP (if it ever gets released). They are all 2.5" outlet so I want to do a full 2.5" single exhaust for both cost and weight savings. So after the J pipe I need a single resonator and then a single muffler. I'll then have a shop weld everything up. My question to you guys is, which ones for each should I consider? Preferably, the whole setup should not be much louder than say the ATLP quad system. I also want it so I can place matching dummy tips on the side which would be left empty by doing this type of system. Either stock tips or something aftermarket. Again, any advice will be greatly appreciated!
#4
Cruisin'
Thread Starter
Pre-cat deletes that is. Third cat delete would be achieved with the J pipe install. Wouldn't 3" be unnecessarily large if the J pipe outlet is 2.5 already? Would I really see any gains going to 3" or just increased noise/cost?
#5
Moderator
iTrader: (1)
Gotcha...PCD's not test pipe.
Inaccurate beat a camaro SS![Big Grin](https://acurazine.com/forums/images/smilies/biggrin.gif)
and he has a 3inch exhaust!
https://acurazine.com/forums/3g-tl-performance-parts-modifications-112/j30a5-dyno-me-855798/
Sonnick has a collector going from 2.5 to 3.
he saw SOLID gains on a 3.0 motor.
accuratein:
https://acurazine.com/forums/3g-tl-performance-parts-modifications-112/3-inch-piping-640071/
Inaccurate beat a camaro SS
![Big Grin](https://acurazine.com/forums/images/smilies/biggrin.gif)
and he has a 3inch exhaust!
https://acurazine.com/forums/3g-tl-performance-parts-modifications-112/j30a5-dyno-me-855798/
Sonnick has a collector going from 2.5 to 3.
he saw SOLID gains on a 3.0 motor.
accuratein:
https://acurazine.com/forums/3g-tl-performance-parts-modifications-112/3-inch-piping-640071/
#6
Safety Car
Get a 3" Single exhaust and YOU TOO can beat American muscle cars. ![Tongue](https://acurazine.com/forums/images/smilies/tongue.gif)
RELATED READING -
My custom 3" Single Exit Exhaust System with just one 18" straight-thru Magnaflow (click here)
1) single exhaust (click here)
2) Diary of an EXHAUST Addict (click here)
3) DUAL Exhaust VS SINGLE Exhaust (click here)
4) Picked up 15 hp...find out how (click here)
5) thinking about single exhaust (click here)
6) 70mm (2.75") piping on J series? (click here)
7) 3 inch piping (click here)
8) 3 INCHES!?!?! (That's what she said) (click here)
9) custom 3" magnaflow exhaust installed (click here)
10) single vs. dual exhaust (click here)
11) Single-Exit HKS Exhaust Writeup (click here)
12) Video Clips! 6MT NA (click here)
For the links below, copy and paste these links into your browser. Remove the red X before submitting. Acurazine blocks these links. So, this is why I must disguise them with a red X.
1) www.v6Xperformance.net/forums/7g-performance-discussion/210172-3-inch-2-5-inch.html
2) www.v6Xperformance.net/forums/7th-generation-honda-accord-2003-2007/210729-magnaflow-exhaust-gurus-opinions-needed.html
3) www.v6Xperformance.net/forums/7g-performance-discussion/209692-best-single-exhaust-setup.html
4) www.v6Xperformance.net/forums/7g-performance-discussion/196600-my-dyno-vid-7th-gen-v6-6-speed-manual-245whp-211wtq-exhaust-no-cats.html
5) www.v6Xperformance.net/forums/7g-performance-discussion/201030-opinions-custom-exhaust-idea.html
6) www.v6Xperformance.net/forums/6g-performance-discussion/209376-straight-pipes.html
7) www.v6Xperformance.net/forums/7g-performance-discussion/209232-v6-accord-tsudo-76mm-single-exhaust.html
![Tongue](https://acurazine.com/forums/images/smilies/tongue.gif)
RELATED READING -
My custom 3" Single Exit Exhaust System with just one 18" straight-thru Magnaflow (click here)
1) single exhaust (click here)
2) Diary of an EXHAUST Addict (click here)
3) DUAL Exhaust VS SINGLE Exhaust (click here)
4) Picked up 15 hp...find out how (click here)
5) thinking about single exhaust (click here)
6) 70mm (2.75") piping on J series? (click here)
7) 3 inch piping (click here)
8) 3 INCHES!?!?! (That's what she said) (click here)
9) custom 3" magnaflow exhaust installed (click here)
10) single vs. dual exhaust (click here)
11) Single-Exit HKS Exhaust Writeup (click here)
12) Video Clips! 6MT NA (click here)
For the links below, copy and paste these links into your browser. Remove the red X before submitting. Acurazine blocks these links. So, this is why I must disguise them with a red X.
1) www.v6Xperformance.net/forums/7g-performance-discussion/210172-3-inch-2-5-inch.html
2) www.v6Xperformance.net/forums/7th-generation-honda-accord-2003-2007/210729-magnaflow-exhaust-gurus-opinions-needed.html
3) www.v6Xperformance.net/forums/7g-performance-discussion/209692-best-single-exhaust-setup.html
4) www.v6Xperformance.net/forums/7g-performance-discussion/196600-my-dyno-vid-7th-gen-v6-6-speed-manual-245whp-211wtq-exhaust-no-cats.html
5) www.v6Xperformance.net/forums/7g-performance-discussion/201030-opinions-custom-exhaust-idea.html
6) www.v6Xperformance.net/forums/6g-performance-discussion/209376-straight-pipes.html
7) www.v6Xperformance.net/forums/7g-performance-discussion/209232-v6-accord-tsudo-76mm-single-exhaust.html
The following users liked this post:
truereligion (06-13-2012)
Thread
Thread Starter
Forum
Replies
Last Post
mlody
5G TLX (2015-2020)
85
12-04-2019 02:11 PM
joflewbyu2
5G TLX (2015-2020)
139
10-08-2015 11:16 AM
Yumcha
Automotive News
1
09-25-2015 06:14 PM