Intake Manifold Spacer Installed
#41
Do you know where I can get the bolts I’ll need for this? Just bought the same part at a Chevy dealer, and didn’t come with any bolts
Installed the spacer from the Pilot/mdx/etc. I work at a chevy dealer, and the same spacer is on the saturn vue. My cost it was $24. Not bad. Haven't really drove it around yet I literally just finished.
I have to clean under the hood a bit when I have some time. Also, my next day off would like to do some porting and polishing on the top end. Didn't have time today.
Attachment 48568
Attachment 48569
Attachment 48570
I have to clean under the hood a bit when I have some time. Also, my next day off would like to do some porting and polishing on the top end. Didn't have time today.
Attachment 48568
Attachment 48569
Attachment 48570
#42
You need M8 - 1.25x90mm flange bolts. You can go to Napa, but they don't sell the flag bolts, you'll need washers, which might affect torque value while torquing the bolts down because the washers tend to move. You won't find them at Ace hardware either, I already looked.
I used these, grade 10.9:
I did the same mod on my 07 Accord V6.
I used these, grade 10.9:
I did the same mod on my 07 Accord V6.
Last edited by t-rd; 03-17-2018 at 10:46 AM. Reason: ue
Thread
Thread Starter
Forum
Replies
Last Post
cycdaniel
1G TSX Performance Parts & Modifications
8
12-17-2019 10:58 AM
JarrettLauderdale
2G CL Dynograph Gallery
5
09-21-2015 07:51 PM